pinebuds/rtos/rtx5/GCC/irq_cm0.S

174 lines
5.9 KiB
ArmAsm

/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* -----------------------------------------------------------------------------
*
* Project: CMSIS-RTOS RTX
* Title: Cortex-M0 Exception handlers
*
* -----------------------------------------------------------------------------
*/
.file "irq_cm0.S"
.syntax unified
.equ I_T_RUN_OFS, 20 // osRtxInfo.thread.run offset
.equ TCB_SP_OFS, 56 // TCB.SP offset
.section ".rodata"
.global irqRtxLib // Non weak library reference
irqRtxLib:
.byte 0
.thumb
.section ".text"
.align 2
.thumb_func
.type SVC_Handler, %function
.global SVC_Handler
.fnstart
.cantunwind
SVC_Handler:
MOV R0,LR
LSRS R0,R0,#3 // Determine return stack from EXC_RETURN bit 2
BCC SVC_MSP // Branch if return stack is MSP
MRS R0,PSP // Get PSP
SVC_Number:
LDR R1,[R0,#24] // Load saved PC from stack
SUBS R1,R1,#2 // Point to SVC instruction
LDRB R1,[R1] // Load SVC number
CMP R1,#0
BNE SVC_User // Branch if not SVC 0
PUSH {R0,LR} // Save SP and EXC_RETURN
LDMIA R0,{R0-R3} // Load function parameters from stack
BLX R7 // Call service function
POP {R2,R3} // Restore SP and EXC_RETURN
STMIA R2!,{R0-R1} // Store function return values
MOV LR,R3 // Set EXC_RETURN
SVC_Context:
LDR R3,=osRtxInfo+I_T_RUN_OFS // Load address of osRtxInfo.run
LDMIA R3!,{R1,R2} // Load osRtxInfo.thread.run: curr & next
CMP R1,R2 // Check if thread switch is required
BEQ SVC_Exit // Branch when threads are the same
CMP R1,#0
BEQ SVC_ContextSwitch // Branch if running thread is deleted
SVC_ContextSave:
MRS R0,PSP // Get PSP
SUBS R0,R0,#32 // Calculate SP
STR R0,[R1,#TCB_SP_OFS] // Store SP
STMIA R0!,{R4-R7} // Save R4..R7
MOV R4,R8
MOV R5,R9
MOV R6,R10
MOV R7,R11
STMIA R0!,{R4-R7} // Save R8..R11
SVC_ContextSwitch:
SUBS R3,R3,#8 // Adjust address
STR R2,[R3] // osRtxInfo.thread.run: curr = next
SVC_ContextRestore:
LDR R0,[R2,#TCB_SP_OFS] // Load SP
ADDS R0,R0,#16 // Adjust address
LDMIA R0!,{R4-R7} // Restore R8..R11
MOV R8,R4
MOV R9,R5
MOV R10,R6
MOV R11,R7
MSR PSP,R0 // Set PSP
SUBS R0,R0,#32 // Adjust address
LDMIA R0!,{R4-R7} // Restore R4..R7
MOVS R0,#~0xFFFFFFFD
MVNS R0,R0 // Set EXC_RETURN value
BX R0 // Exit from handler
SVC_MSP:
MRS R0,MSP // Get MSP
B SVC_Number
SVC_Exit:
BX LR // Exit from handler
SVC_User:
LDR R2,=osRtxUserSVC // Load address of SVC table
LDR R3,[R2] // Load SVC maximum number
CMP R1,R3 // Check SVC number range
BHI SVC_Exit // Branch if out of range
PUSH {R0,LR} // Save SP and EXC_RETURN
LSLS R1,R1,#2
LDR R3,[R2,R1] // Load address of SVC function
MOV R12,R3
LDMIA R0,{R0-R3} // Load function parameters from stack
BLX R12 // Call service function
POP {R2,R3} // Restore SP and EXC_RETURN
STR R0,[R2] // Store function return value
MOV LR,R3 // Set EXC_RETURN
BX LR // Return from handler
.fnend
.size SVC_Handler, .-SVC_Handler
.thumb_func
.type PendSV_Handler, %function
.global PendSV_Handler
.fnstart
.cantunwind
PendSV_Handler:
PUSH {R0,LR} // Save EXC_RETURN
BL osRtxPendSV_Handler // Call osRtxPendSV_Handler
POP {R0,R1} // Restore EXC_RETURN
MOV LR,R1 // Set EXC_RETURN
B SVC_Context
.fnend
.size PendSV_Handler, .-PendSV_Handler
.thumb_func
.type SysTick_Handler, %function
.global SysTick_Handler
.fnstart
.cantunwind
SysTick_Handler:
PUSH {R0,LR} // Save EXC_RETURN
BL osRtxTick_Handler // Call osRtxTick_Handler
POP {R0,R1} // Restore EXC_RETURN
MOV LR,R1 // Set EXC_RETURN
B SVC_Context
.fnend
.size SysTick_Handler, .-SysTick_Handler
.end