pinebuds/platform/hal/hal_cmu_common.c

448 lines
12 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#include "plat_addr_map.h"
#include "hal_cmu.h"
#include CHIP_SPECIFIC_HDR(reg_cmu)
#ifdef AON_CMU_BASE
#include CHIP_SPECIFIC_HDR(reg_aoncmu)
#endif
#include "cmsis.h"
#include "hal_analogif.h"
#include "hal_bootmode.h"
#include "hal_cache.h"
#include "hal_chipid.h"
#include "hal_iomux.h"
#include "hal_location.h"
#include "hal_norflash.h"
#include "hal_sleep.h"
#include "hal_sysfreq.h"
#include "hal_timer.h"
#include "hal_trace.h"
#if defined(CHIP_HAS_USB) && (defined(MCU_HIGH_PERFORMANCE_MODE) && !(defined(ULTRA_LOW_POWER) || defined(OSC_26M_X4_AUD2BB)))
#define USB_PLL_INIT_ON
#endif
#if (!defined(ULTRA_LOW_POWER) && !defined(OSC_26M_X4_AUD2BB)) || \
(!defined(FLASH_LOW_SPEED) && !defined(OSC_26M_X4_AUD2BB)) || \
(defined(PSRAM_ENABLE) && !defined(PSRAM_LOW_SPEED))
#define AUD_PLL_INIT_ON
#endif
// SIMU_RES
#define CMU_SIMU_RES_PASSED (0x9A55)
#define CMU_SIMU_RES_FAILED (0xFA11)
typedef void (*HAL_POWER_DOWN_WAKEUP_HANDLER)(void);
static struct CMU_T * const cmu = (struct CMU_T *)CMU_BASE;
#ifdef AON_CMU_BASE
static struct AONCMU_T * const POSSIBLY_UNUSED aoncmu = (struct AONCMU_T *)AON_CMU_BASE;
#endif
#ifdef HAL_CMU_VALID_CRYSTAL_FREQ
static const uint32_t valid_crystal_freq_list[] = HAL_CMU_VALID_CRYSTAL_FREQ;
#define CRYSTAL_FREQ_ATTR BOOT_DATA_LOC
#else
#define CRYSTAL_FREQ_ATTR const
#endif
static uint32_t CRYSTAL_FREQ_ATTR crystal_freq = HAL_CMU_DEFAULT_CRYSTAL_FREQ;
void BOOT_TEXT_FLASH_LOC hal_cmu_set_crystal_freq_index(uint32_t index)
{
#ifdef HAL_CMU_VALID_CRYSTAL_FREQ
if (index >= ARRAY_SIZE(valid_crystal_freq_list)) {
index %= ARRAY_SIZE(valid_crystal_freq_list);
}
crystal_freq = valid_crystal_freq_list[index];
#endif
}
uint32_t BOOT_TEXT_SRAM_LOC hal_cmu_get_crystal_freq(void)
{
return crystal_freq;
}
uint32_t BOOT_TEXT_FLASH_LOC hal_cmu_get_default_crystal_freq(void)
{
return HAL_CMU_DEFAULT_CRYSTAL_FREQ;
}
void hal_cmu_write_lock(void)
{
cmu->WRITE_UNLOCK = 0xCAFE0000;
}
void hal_cmu_write_unlock(void)
{
cmu->WRITE_UNLOCK = 0xCAFE0001;
}
void hal_cmu_sys_reboot(void)
{
hal_cmu_reset_set(HAL_CMU_MOD_GLOBAL);
}
void hal_cmu_simu_init(void)
{
cmu->SIMU_RES = 0;
}
void hal_cmu_simu_pass(void)
{
cmu->SIMU_RES = CMU_SIMU_RES_PASSED;
}
void hal_cmu_simu_fail(void)
{
cmu->SIMU_RES = CMU_SIMU_RES_FAILED;
}
void hal_cmu_simu_tag(uint8_t shift)
{
cmu->SIMU_RES |= (1 << shift);
}
void hal_cmu_simu_set_val(uint32_t val)
{
cmu->SIMU_RES = val;
}
uint32_t hal_cmu_simu_get_val(void)
{
return cmu->SIMU_RES;
}
void hal_cmu_set_wakeup_pc(uint32_t pc)
{
#ifdef RAMRET_BASE
uint32_t *wake_pc =
#ifdef CHIP_BEST2000
(uint32_t *)RAMRET_BASE;
#else
(uint32_t *)&aoncmu->WAKEUP_PC;
STATIC_ASSERT(sizeof(HAL_POWER_DOWN_WAKEUP_HANDLER) <= sizeof(uint32_t), "Invalid func ptr size");
#endif
*wake_pc = pc;
#endif
}
void hal_cmu_rom_wakeup_check(void)
{
#ifdef RAMRET_BASE
union HAL_HW_BOOTMODE_T hw;
uint32_t sw;
HAL_POWER_DOWN_WAKEUP_HANDLER *wake_fn =
#ifdef CHIP_BEST2000
(HAL_POWER_DOWN_WAKEUP_HANDLER *)RAMRET_BASE;
#else
(HAL_POWER_DOWN_WAKEUP_HANDLER *)&aoncmu->WAKEUP_PC;
#endif
hw = hal_rom_hw_bootmode_get();
if (hw.watchdog == 0 && hw.global == 0) {
sw = hal_sw_bootmode_get();
if ((sw & HAL_SW_BOOTMODE_POWER_DOWN_WAKEUP) && *wake_fn) {
(*wake_fn)();
}
}
*wake_fn = NULL;
#endif
}
#ifndef HAL_CMU_PLL_T
void hal_cmu_rom_enable_pll(void)
{
#ifdef CHIP_HAS_USB
hal_cmu_pll_enable(HAL_CMU_PLL_USB, HAL_CMU_PLL_USER_SYS);
hal_cmu_sys_select_pll(HAL_CMU_PLL_USB);
hal_cmu_flash_select_pll(HAL_CMU_PLL_USB);
#else
hal_cmu_pll_enable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_SYS);
hal_cmu_sys_select_pll(HAL_CMU_PLL_AUD);
hal_cmu_flash_select_pll(HAL_CMU_PLL_AUD);
#endif
}
void hal_cmu_programmer_enable_pll(void)
{
hal_cmu_pll_enable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_SYS);
hal_cmu_flash_select_pll(HAL_CMU_PLL_AUD);
hal_cmu_sys_select_pll(HAL_CMU_PLL_AUD);
}
void BOOT_TEXT_FLASH_LOC hal_cmu_init_pll_selection(void)
{
// !!!!!!
// CAUTION:
// hal_cmu_pll_enable()/hal_cmu_pll_disable() must be called after hal_chipid_init(),
// for the init div values are extracted in hal_chipid_init().
// !!!!!!
#if defined(CHIP_BEST1000) || defined(CHIP_BEST2000)
#ifdef CHIP_HAS_USB
// Enable USB PLL before switching (clock mux requirement)
// -- USB PLL might not be started in ROM
hal_cmu_pll_enable(HAL_CMU_PLL_USB, HAL_CMU_PLL_USER_SYS);
#endif
hal_cmu_pll_enable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_SYS);
#else // !(best1000 || best2000)
// Disable the PLL which might be enabled in ROM
#ifdef CHIP_HAS_USB
hal_cmu_pll_disable(HAL_CMU_PLL_USB, HAL_CMU_PLL_USER_ALL);
#else
hal_cmu_pll_disable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_ALL);
#endif
#endif // !(best1000 || best2000)
#ifdef FLASH_LOW_SPEED
#ifdef CHIP_HAS_USB
// Switch flash clock to USB PLL, and then shutdown USB PLL,
// to save power consumed in clock divider
hal_cmu_flash_select_pll(HAL_CMU_PLL_USB);
#endif
#else
// Switch flash clock to audio PLL
hal_cmu_flash_select_pll(HAL_CMU_PLL_AUD);
#endif
#ifdef CHIP_HAS_PSRAM
#ifdef PSRAM_LOW_SPEED
#ifdef CHIP_HAS_USB
// Switch psram clock to USB PLL, and then shutdown USB PLL,
// to save power consumed in clock divider
hal_cmu_mem_select_pll(HAL_CMU_PLL_USB);
#endif
#else
// Switch psram clock to audio PLL
hal_cmu_mem_select_pll(HAL_CMU_PLL_AUD);
#endif
#endif
// Select system PLL after selecting flash/psram PLLs
#ifdef ULTRA_LOW_POWER
hal_cmu_low_freq_mode_init();
#else
#if defined(MCU_HIGH_PERFORMANCE_MODE) && defined(CHIP_HAS_USB)
// Switch system clocks to USB PLL
hal_cmu_sys_select_pll(HAL_CMU_PLL_USB);
#else
// Switch system clocks to audio PLL
hal_cmu_sys_select_pll(HAL_CMU_PLL_AUD);
#endif
#endif
#if defined(CHIP_BEST1000) || defined(CHIP_BEST2000)
#ifndef USB_PLL_INIT_ON
// Disable USB PLL after switching (clock mux requirement)
hal_cmu_pll_disable(HAL_CMU_PLL_USB, HAL_CMU_PLL_USER_SYS);
#endif
#ifndef AUD_PLL_INIT_ON
hal_cmu_pll_disable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_SYS);
#endif
#else // !(best1000 || best2000)
#ifdef USB_PLL_INIT_ON
hal_cmu_pll_enable(HAL_CMU_PLL_USB, HAL_CMU_PLL_USER_SYS);
#endif
#ifdef AUD_PLL_INIT_ON
hal_cmu_pll_enable(HAL_CMU_PLL_AUD, HAL_CMU_PLL_USER_SYS);
#endif
#endif // !(best1000 || best2000)
#if defined(MCU_HIGH_PERFORMANCE_MODE) && !defined(ULTRA_LOW_POWER) && defined(OSC_26M_X4_AUD2BB)
#error "Error configuration: MCU_HIGH_PERFORMANCE_MODE has no effect"
#endif
}
#endif // !HAL_CMU_PLL_T
static void BOOT_TEXT_FLASH_LOC hal_cmu_init_periph_clock(void)
{
#ifdef PERIPH_PLL_FREQ
hal_cmu_periph_set_div(1);
#endif
// TODO: Move the following SDIO freq setting to hal_sdio.c
#ifdef CHIP_HAS_SDIO
hal_cmu_sdio_set_freq(HAL_CMU_PERIPH_FREQ_26M);
#endif
}
void hal_cmu_rom_setup(void)
{
hal_cmu_lpu_wait_26m_ready();
hal_cmu_simu_init();
hal_cmu_rom_clock_init();
hal_cmu_timer0_select_slow();
#ifdef TIMER1_BASE
hal_cmu_timer1_select_fast();
#endif
hal_sys_timer_open();
// Init sys clock
hal_cmu_sys_set_freq(HAL_CMU_FREQ_26M);
// Init flash clock (this should be done before load_boot_settings, for security register read)
hal_cmu_flash_set_freq(HAL_CMU_FREQ_26M);
// Reset flash controller (for JTAG reset and run)
// Enable flash controller (flash controller is reset by default since BEST1400)
hal_cmu_reset_set(HAL_CMU_MOD_O_FLASH);
hal_cmu_reset_set(HAL_CMU_MOD_H_FLASH);
hal_cmu_reset_clear(HAL_CMU_MOD_H_FLASH);
hal_cmu_reset_clear(HAL_CMU_MOD_O_FLASH);
// Disable cache (for JTAG reset and run)
hal_cache_disable(HAL_CACHE_ID_I_CACHE);
hal_cache_disable(HAL_CACHE_ID_D_CACHE);
// Init APB clock
hal_cmu_apb_init_div();
}
void hal_cmu_programmer_setup(void)
{
hal_cmu_ema_init();
hal_sys_timer_open();
#ifdef JTAG_ENABLE
hal_iomux_set_jtag();
hal_cmu_jtag_clock_enable();
#endif
#ifndef FPGA
int ret;
// Open analogif (ISPI)
ret = hal_analogif_open();
if (ret) {
hal_cmu_simu_tag(31);
do { volatile int i = 0; i++; } while (1);
}
// Init chip id
// 1) Read id from ana/rf/pmu
// 2) Init clock settings in ana/rf/pmu if the default h/w register values are bad
hal_chipid_init();
// Enable OSC X2/X4 in cmu after enabling their source in hal_chipid_init()
hal_cmu_osc_x2_enable();
hal_cmu_osc_x4_enable();
#endif
}
#ifdef FPGA
void BOOT_TEXT_FLASH_LOC hal_cmu_fpga_setup(void)
{
hal_cmu_timer0_select_slow();
hal_sys_timer_open();
hal_sysfreq_req(HAL_SYSFREQ_USER_INIT, HAL_CMU_FREQ_52M);
hal_cmu_apb_init_div();
hal_cmu_ispi_set_freq(HAL_CMU_PERIPH_FREQ_26M);
// Init peripheral clocks
hal_cmu_init_periph_clock();
hal_norflash_init();
#if defined(CHIP_HAS_PSRAM) && defined(PSRAM_ENABLE)
hal_psram_init();
#endif
}
#else // !FPGA
void BOOT_TEXT_FLASH_LOC hal_cmu_setup(void)
{
int ret;
enum HAL_CMU_FREQ_T freq;
hal_iomux_set_default_config();
#ifdef JTAG_ENABLE
hal_iomux_set_jtag();
hal_cmu_jtag_clock_enable();
#endif
hal_cmu_module_init_state();
hal_cmu_ema_init();
hal_cmu_timer0_select_slow();
#ifdef TIMER1_BASE
hal_cmu_timer1_select_fast();
#endif
hal_sys_timer_open();
hal_hw_bootmode_init();
// Init system/flash/memory clocks before initializing clock setting
// and before switching PLL
hal_norflash_set_freq(HAL_CMU_FREQ_26M);
hal_cmu_mem_set_freq(HAL_CMU_FREQ_26M);
hal_cmu_sys_set_freq(HAL_CMU_FREQ_26M);
// Set ISPI module freq
hal_cmu_ispi_set_freq(HAL_CMU_PERIPH_FREQ_26M);
// Open analogif (ISPI)
ret = hal_analogif_open();
if (ret) {
hal_cmu_simu_tag(31);
do { volatile int i = 0; i++; } while (1);
}
// Init chip id
// 1) Read id from ana/rf/pmu
// 2) Init clock settings in ana/rf/pmu if the default h/w register values are bad
hal_chipid_init();
#ifdef CALIB_SLOW_TIMER
// Calib slow timer after determining the crystal freq
hal_sys_timer_calib();
#endif
// Enable OSC X2/X4 in cmu after enabling their source in hal_chipid_init()
hal_cmu_osc_x2_enable();
hal_cmu_osc_x4_enable();
// Init PLL selection
hal_cmu_init_pll_selection();
// Init peripheral clocks
hal_cmu_init_periph_clock();
// Sleep setting
#ifdef NO_LPU_26M
while (hal_cmu_lpu_init(HAL_CMU_LPU_CLK_NONE) == -1);
#else
while (hal_cmu_lpu_init(HAL_CMU_LPU_CLK_26M) == -1);
#endif
// Init sys freq after applying the sleep setting (which might change sys freq)
#ifdef NO_LPU_26M
hal_sys_timer_delay(MS_TO_TICKS(20));
#endif
// Init system clock
#ifdef ULTRA_LOW_POWER
freq = HAL_CMU_FREQ_52M;
#else
freq = HAL_CMU_FREQ_104M;
#endif
hal_sysfreq_req(HAL_SYSFREQ_USER_INIT, freq);
// Init flash
hal_norflash_init();
}
#endif // !FPGA