411 lines
9.7 KiB
C
411 lines
9.7 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright 2015-2019 BES.
|
|
* All rights reserved. All unpublished rights reserved.
|
|
*
|
|
* No part of this work may be used or reproduced in any form or by any
|
|
* means, or stored in a database or retrieval system, without prior written
|
|
* permission of BES.
|
|
*
|
|
* Use of this work is governed by a license granted by BES.
|
|
* This work contains confidential and proprietary information of
|
|
* BES. which is protected by copyright, trade secret,
|
|
* trademark and other intellectual property rights.
|
|
*
|
|
****************************************************************************/
|
|
#include "usbphy.h"
|
|
#include "cmsis_nvic.h"
|
|
#include "hal_cmu.h"
|
|
#include "hal_phyif.h"
|
|
#include "hal_timer.h"
|
|
#include "hal_trace.h"
|
|
#include "pmu.h"
|
|
#include CHIP_SPECIFIC_HDR(reg_usbphy)
|
|
|
|
#ifdef CHIP_HAS_SPIPHY
|
|
|
|
//#define USBPHY_SERIAL_ITF
|
|
|
|
void usbphy_ldo_config(int enable)
|
|
{
|
|
int ret;
|
|
uint16_t val;
|
|
|
|
ret = hal_phyif_open(SPIPHY_USB_CS);
|
|
if (ret) {
|
|
hal_phyif_close(SPIPHY_USB_CS);
|
|
return;
|
|
}
|
|
|
|
if (enable) {
|
|
#ifdef USB_HIGH_SPEED
|
|
// USB ldo voltage should match with vcore (now 0.9V)
|
|
usbphy_write(0x61, 0x1118);
|
|
#else
|
|
usbphy_write(0x61, 0x1116);
|
|
#endif
|
|
usbphy_write(0x62, 0x2229);
|
|
usbphy_write(0x63, 0x0D82);
|
|
|
|
hal_sys_timer_delay(MS_TO_TICKS(1));
|
|
} else {
|
|
usbphy_write(0x63, 0x0000);
|
|
usbphy_write(0x62, 0x0000);
|
|
|
|
usbphy_read(0x61, &val);
|
|
val &= (0x1 << 8);
|
|
usbphy_write(0x61, val);
|
|
|
|
hal_sys_timer_delay(2);
|
|
hal_phyif_close(SPIPHY_USB_CS);
|
|
}
|
|
}
|
|
|
|
void usbphy_open(void)
|
|
{
|
|
unsigned short val_01, val;
|
|
|
|
#ifdef USB_HIGH_SPEED
|
|
|
|
usbphy_read(0x01, &val_01);
|
|
val_01 &= ~((1 << 0) | (1 << 11));
|
|
usbphy_write(0x01, val_01);
|
|
val_01 |= (1 << 1) | (1 << 2) | (1 << 3) | (1 << 13);
|
|
#ifdef USBPHY_SERIAL_ITF
|
|
// cdr_clk polariy=1
|
|
val_01 |= (1 << 4);
|
|
#else
|
|
// cdr_clk polariy=0
|
|
val_01 &= ~(1 << 4);
|
|
#endif
|
|
usbphy_write(0x01, val_01);
|
|
|
|
usbphy_read(0x02, &val);
|
|
val = (val & ~(0x1F << 10)) | (0xC << 10);
|
|
usbphy_write(0x02, val);
|
|
|
|
usbphy_read(0x05, &val);
|
|
val |= (1 << 8);
|
|
usbphy_write(0x05, val);
|
|
|
|
#ifdef USBPHY_SERIAL_ITF
|
|
usbphy_write(0x06, 0x4EE9);
|
|
#else
|
|
usbphy_write(0x06, 0xCEE8);
|
|
#endif
|
|
|
|
usbphy_write(0x07, 0x9813);
|
|
|
|
usbphy_read(0x08, &val);
|
|
usbphy_write(0x08, val);
|
|
|
|
usbphy_read(0x09, &val);
|
|
usbphy_write(0x09, val);
|
|
|
|
#ifdef USBPHY_SERIAL_ITF
|
|
usbphy_write(0x0D, 0x2B1E);
|
|
#else
|
|
usbphy_write(0x0D, 0x2A1E);
|
|
#endif
|
|
|
|
// Disable force clocks, and disable hs son signal
|
|
usbphy_write(0x22, 0x030F);
|
|
|
|
// Ignore all UTMI errors
|
|
usbphy_write(0x12, 0x0003);
|
|
|
|
hal_sys_timer_delay(MS_TO_TICKS(1));
|
|
|
|
val_01 |= (1 << 0);
|
|
usbphy_write(0x01, val_01);
|
|
|
|
#ifdef USB_HS_LOOPBACK_TEST
|
|
usbphy_read(0x0A, &val);
|
|
val |= (1 << 3) | (1 << 4) | (1 << 6);
|
|
usbphy_write(0x0A, val);
|
|
usbphy_read(0x0B, &val);
|
|
val &= ~((1 << 3) | (1 << 4) | (3 << 6));
|
|
usbphy_write(0x0B, val);
|
|
usbphy_read(0x09, &val);
|
|
usbphy_write(0x09, val);
|
|
usbphy_read(0x06, &val);
|
|
usbphy_write(0x06, val);
|
|
|
|
hal_sys_timer_delay(MS_TO_TICKS(1));
|
|
|
|
#define LOOPBACK_PATTERN (*(volatile uint8_t *)0x20000004)
|
|
|
|
LOOPBACK_PATTERN = 0;
|
|
uint8_t pattern = LOOPBACK_PATTERN;
|
|
|
|
// Set tx pattern
|
|
usbphy_read(0x03, &val);
|
|
val = (val & ~(0xFF << 8)) | (pattern << 8);
|
|
usbphy_write(0x03, val);
|
|
|
|
// Enable force clocks
|
|
usbphy_read(0x22, &val);
|
|
val |= (1 << 4) | (1 << 5) | (1 << 6);
|
|
usbphy_write(0x22, val);
|
|
|
|
// Enable tx
|
|
usbphy_read(0x04, &val);
|
|
val |= (1 << 1);
|
|
usbphy_write(0x04, val);
|
|
|
|
// Update tx pattern
|
|
while (1) {
|
|
if (pattern != LOOPBACK_PATTERN) {
|
|
pattern = LOOPBACK_PATTERN;
|
|
usbphy_read(0x03, &val);
|
|
val = (val & ~(0xFF << 8)) | (pattern << 8);
|
|
usbphy_write(0x03, val);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#else // !USB_HIGH_SPEED
|
|
|
|
usbphy_read(0x01, &val_01);
|
|
val_01 &= ~(1 << 0);
|
|
usbphy_write(0x01, val_01);
|
|
val_01 |= (1 << 3);
|
|
usbphy_write(0x01, val_01);
|
|
|
|
#ifdef USB_USE_USBPLL
|
|
val_01 |= (1 << 2) | (1 << 12);
|
|
usbphy_write(0x01, val_01);
|
|
|
|
usbphy_read(0x33, &val);
|
|
val |= (1 << 0);
|
|
usbphy_write(0x33, val);
|
|
#endif
|
|
|
|
val = 0;
|
|
usbphy_write(0x06, val);
|
|
|
|
usbphy_read(0x07, &val);
|
|
usbphy_write(0x07, val);
|
|
|
|
val = 0;
|
|
usbphy_write(0x08, val);
|
|
|
|
val = 0;
|
|
usbphy_write(0x09, val);
|
|
|
|
val_01 |= (1 << 0);
|
|
usbphy_write(0x01, val_01);
|
|
|
|
#endif // USB_HIGH_SPEED
|
|
|
|
}
|
|
|
|
void usbphy_close(void)
|
|
{
|
|
}
|
|
|
|
void usbphy_sleep(void)
|
|
{
|
|
uint16_t val;
|
|
|
|
usbphy_read(0x01, &val);
|
|
#ifdef USB_HIGH_SPEED
|
|
val &= ~((1 << 1) | (1 << 2) | (1 << 3));
|
|
#elif defined(USB_USE_USBPLL)
|
|
val &= ~((1 << 2) | (1 << 3));
|
|
#else
|
|
val &= ~(1 << 3);
|
|
#endif
|
|
usbphy_write(0x01, val);
|
|
|
|
#if !defined(USB_HIGH_SPEED) && defined(USB_USE_USBPLL)
|
|
usbphy_read(0x33, &val);
|
|
val &= ~(1 << 0);
|
|
usbphy_write(0x33, val);
|
|
#endif
|
|
|
|
usbphy_write(0x62, 0x0000);
|
|
usbphy_write(0x63, 0x0000);
|
|
}
|
|
|
|
void usbphy_wakeup(void)
|
|
{
|
|
uint16_t val;
|
|
|
|
usbphy_write(0x62, 0x2229);
|
|
usbphy_write(0x63, 0x0D82);
|
|
|
|
#if !defined(USB_HIGH_SPEED) && defined(USB_USE_USBPLL)
|
|
usbphy_read(0x33, &val);
|
|
val |= (1 << 0);
|
|
usbphy_write(0x33, val);
|
|
#endif
|
|
|
|
usbphy_read(0x01, &val);
|
|
#ifdef USB_HIGH_SPEED
|
|
val |= (1 << 1) | (1 << 2) | (1 << 3);
|
|
#elif defined(USB_USE_USBPLL)
|
|
val |= (1 << 2) | (1 << 3);
|
|
#else
|
|
val |= (1 << 3);
|
|
#endif
|
|
usbphy_write(0x01, val);
|
|
}
|
|
|
|
//============================================================================================
|
|
// USB Pin Status Check
|
|
//============================================================================================
|
|
|
|
static enum PMU_USB_PIN_CHK_STATUS_T usb_pin_status;
|
|
|
|
static PMU_USB_PIN_CHK_CALLBACK usb_pin_callback;
|
|
|
|
static int pmu_usb_check_pin_status(enum PMU_USB_PIN_CHK_STATUS_T status)
|
|
{
|
|
int dp, dm;
|
|
|
|
pmu_usb_get_pin_status(&dp, &dm);
|
|
|
|
//TRACE(5,"[%X] %s: status=%d dp=%d dm=%d", hal_sys_timer_get(), __FUNCTION__, status, dp, dm);
|
|
|
|
// HOST_RESUME: (resume) dp == 0 && dm == 1, (reset) dp == 0 && dm == 0
|
|
|
|
if ( (status == PMU_USB_PIN_CHK_DEV_CONN && (dp == 1 && dm == 0)) ||
|
|
(status == PMU_USB_PIN_CHK_DEV_DISCONN && (dp == 0 && dm == 0)) ||
|
|
(status == PMU_USB_PIN_CHK_HOST_RESUME && dp == 0) ) {
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pmu_usb_pin_irq_handler(void)
|
|
{
|
|
uint16_t val;
|
|
uint32_t lock;
|
|
|
|
//TRACE(2,"[%X] %s", hal_sys_timer_get(), __FUNCTION__);
|
|
|
|
lock = int_lock();
|
|
usbphy_read(USBPHY_REG_1A, &val);
|
|
val |= REG_1A_INTR_CLR;
|
|
usbphy_write(USBPHY_REG_1A, val);
|
|
int_unlock(lock);
|
|
|
|
if (usb_pin_callback) {
|
|
if (pmu_usb_check_pin_status(usb_pin_status)) {
|
|
pmu_usb_disable_pin_status_check();
|
|
usb_pin_callback(usb_pin_status);
|
|
}
|
|
}
|
|
}
|
|
|
|
int pmu_usb_config_pin_status_check(enum PMU_USB_PIN_CHK_STATUS_T status, PMU_USB_PIN_CHK_CALLBACK callback, int enable)
|
|
{
|
|
uint16_t val;
|
|
uint32_t lock;
|
|
|
|
//TRACE(3,"[%X] %s: status=%d", hal_sys_timer_get(), __FUNCTION__, status);
|
|
|
|
if (status >= PMU_USB_PIN_CHK_STATUS_QTY) {
|
|
return 1;
|
|
}
|
|
|
|
NVIC_DisableIRQ(USB_PIN_IRQn);
|
|
|
|
lock = int_lock();
|
|
|
|
usb_pin_status = status;
|
|
usb_pin_callback = callback;
|
|
|
|
usbphy_read(USBPHY_REG_1A, &val);
|
|
|
|
// Mask the irq
|
|
val &= ~REG_1A_USB_INSERT_INTR_MSK;
|
|
|
|
// Config pin check
|
|
val |= REG_1A_DEBOUNCE_EN | REG_1A_NOLS_MODE | REG_1A_USBINSERT_DET_EN;
|
|
|
|
val &= ~(REG_1A_POL_USB_RX_DP | REG_1A_POL_USB_RX_DM);
|
|
if (status == PMU_USB_PIN_CHK_DEV_CONN) {
|
|
// Check dp 0->1, dm x->0
|
|
} else if (status == PMU_USB_PIN_CHK_DEV_DISCONN) {
|
|
// Check dp 1->0, dm x->0
|
|
val |= REG_1A_POL_USB_RX_DP;
|
|
} else if (status == PMU_USB_PIN_CHK_HOST_RESUME) {
|
|
// Check dp 1->0, dm 0->1 (resume) or dm 0->0 (reset)
|
|
val |= REG_1A_POL_USB_RX_DP;
|
|
}
|
|
|
|
if (status != PMU_USB_PIN_CHK_NONE && callback) {
|
|
val |= REG_1A_USBINSERT_INTR_EN | REG_1A_USB_INSERT_INTR_MSK | REG_1A_INTR_CLR;
|
|
}
|
|
|
|
usbphy_write(USBPHY_REG_1A, val);
|
|
|
|
int_unlock(lock);
|
|
|
|
if (enable) {
|
|
// Wait at least 10 cycles of 32K clock for the new status when signal checking polarity is changed
|
|
hal_sys_timer_delay(5);
|
|
pmu_usb_enable_pin_status_check();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pmu_usb_enable_pin_status_check(void)
|
|
{
|
|
uint16_t val;
|
|
uint32_t lock;
|
|
|
|
if (usb_pin_status != PMU_USB_PIN_CHK_NONE && usb_pin_callback) {
|
|
lock = int_lock();
|
|
usbphy_read(USBPHY_REG_1A, &val);
|
|
val |= REG_1A_INTR_CLR;
|
|
usbphy_write(USBPHY_REG_1A, val);
|
|
int_unlock(lock);
|
|
NVIC_ClearPendingIRQ(USB_PIN_IRQn);
|
|
|
|
if (pmu_usb_check_pin_status(usb_pin_status)) {
|
|
pmu_usb_disable_pin_status_check();
|
|
usb_pin_callback(usb_pin_status);
|
|
return;
|
|
}
|
|
|
|
NVIC_SetVector(USB_PIN_IRQn, (uint32_t)pmu_usb_pin_irq_handler);
|
|
NVIC_SetPriority(USB_PIN_IRQn, IRQ_PRIORITY_NORMAL);
|
|
NVIC_EnableIRQ(USB_PIN_IRQn);
|
|
}
|
|
}
|
|
|
|
void pmu_usb_disable_pin_status_check(void)
|
|
{
|
|
uint16_t val;
|
|
uint32_t lock;
|
|
|
|
NVIC_DisableIRQ(USB_PIN_IRQn);
|
|
|
|
lock = int_lock();
|
|
|
|
usbphy_read(USBPHY_REG_1A, &val);
|
|
val &= ~(REG_1A_USBINSERT_INTR_EN | REG_1A_USBINSERT_DET_EN);
|
|
usbphy_write(USBPHY_REG_1A, val);
|
|
|
|
int_unlock(lock);
|
|
}
|
|
|
|
void pmu_usb_get_pin_status(int *dp, int *dm)
|
|
{
|
|
uint16_t pol, val;
|
|
|
|
usbphy_read(USBPHY_REG_1A, &pol);
|
|
usbphy_read(USBPHY_REG_25, &val);
|
|
|
|
*dp = (!(pol & REG_1A_POL_USB_RX_DP)) ^ (!(val & REG_25_USB_STATUS_RX_DP));
|
|
*dm = (!(pol & REG_1A_POL_USB_RX_DM)) ^ (!(val & REG_25_USB_STATUS_RX_DM));
|
|
}
|
|
|
|
#endif
|
|
|