pinebuds/platform/drivers/bt/bt_drv.h

483 lines
18 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#ifndef __BT_DRV_H__
#define __BT_DRV_H__
#ifdef __cplusplus
extern "C" {
#endif
#include "cmsis.h"
#ifdef RTOS
#include "cmsis_os.h"
#endif
#include "hal_timer.h"
#include "hal_analogif.h"
#include "hal_trace.h"
#define BT_DRV_REG_OP_ENTER() do{ uint32_t stime, spent_time; stime= hal_sys_timer_get();
#define BT_DRV_REG_OP_EXIT() spent_time = TICKS_TO_US(hal_sys_timer_get()-stime);if (spent_time>300)TRACE(2,"%s exit, %dus",__func__, spent_time);}while(0);
#define SBC_PKT_TYPE_DM1 0x3
#define SBC_PKT_TYPE_2EV3 0x6
#define SBC_PKT_TYPE_2DH5 0xe
#define BT_ACL_CONHDL_BIT (0x80)
#if defined(CHIP_BEST1400) || defined(CHIP_BEST1402) || defined(CHIP_BEST2001)
#define BTDRV_ISPI_RF_REG(reg) (((reg) & 0xFFF) | 0x2000)
#else
#define BTDRV_ISPI_RF_REG(reg) (reg)
#endif
#define btdrv_read_rf_reg(reg,val) hal_analogif_reg_read(BTDRV_ISPI_RF_REG(reg),val)
#define btdrv_write_rf_reg(reg,val) hal_analogif_reg_write(BTDRV_ISPI_RF_REG(reg),val)
#define btdrv_delay(ms) hal_sys_timer_delay(MS_TO_TICKS(ms))
#define BTDIGITAL_REG(a) (*(volatile uint32_t *)(uintptr_t)(a))
#define BTDIGITAL_REG_WR(addr, value) (*(volatile uint32_t *)(uintptr_t)(addr)) = (value)
#define BTDIGITAL_BT_EM(a) (*(volatile uint16_t *)(uintptr_t)(a))
/// Macro to write a BT control structure field (16-bit wide)
#define BTDIGITAL_EM_BT_WR(addr, value) (*(volatile uint16_t *)(uintptr_t)(addr)) = (value)
#define BTDIGITAL_REG_SET_FIELD(reg, mask, shift, v)\
do{ \
volatile unsigned int tmp = *(volatile unsigned int *)(reg); \
tmp &= ~(mask<<shift); \
tmp |= (v<<shift); \
*(volatile unsigned int *)(reg) = tmp; \
}while(0)
#define BTDIGITAL_REG_GET_FIELD(reg, mask, shift, v)\
do{ \
volatile unsigned int tmp = *(volatile unsigned int *)(reg); \
v = (tmp>>shift)&mask; \
}while(0)
#define BT_DRV_DEBUG 0
#if BT_DRV_DEBUG
#define BT_DRV_TRACE(n, fmt, ...) TRACE(n, fmt, ##__VA_ARGS__)
#define BT_DRV_DUMP(s,buff,len) DUMP8(s,buff,len)
#else
#define BT_DRV_TRACE(n, fmt, ...) hal_trace_dummy(fmt, ##__VA_ARGS__)
#define BT_DRV_DUMP(s,buff,len) hal_dump_dummy(s, buff, len)
#endif
#define HCI_HOST_NB_CMP_PKTS_CMD_OPCODE 0x0C35
#define HCI_NB_CMP_PKTS_EVT_CODE 0x13
#if defined(CHIP_BEST2300) || defined(__FPGA_BT_2300__)
#define BT_EM_ADDR_BASE (0xD021114A)
#define BT_EM_SIZE (110)
#define BLE_EM_CS_SIZE (90)
#define EM_BT_PWRCNTL_ADDR (BT_EM_ADDR_BASE + 0x16)
#define EM_BT_BT_EXT1_ADDR (BT_EM_ADDR_BASE + 0x66)
#define EM_BT_BITOFF_ADDR (BT_EM_ADDR_BASE + 0x02)
#define EM_BT_CLKOFF0_ADDR (BT_EM_ADDR_BASE + 0x04)
#define EM_BT_CLKOFF1_ADDR (BT_EM_ADDR_BASE + 0x06)
#define EM_BT_WINCNTL_ADDR (BT_EM_ADDR_BASE + 0x1A)
#define EM_BT_RXBIT_ADDR (BT_EM_ADDR_BASE + 0x56)
#define EM_BT_BTADDR1_ADDR (BT_EM_ADDR_BASE + 0xC)
#define EM_BT_LINKCNTL_ADDR (BT_EM_ADDR_BASE + 0x8)
#define EM_BT_RXDESCCNT_ADDR (BT_EM_ADDR_BASE + 0x5A)
#define EM_BT_AUDIOBUF_OFF 0xd021449c
#define EM_BT_RXACLBUFPTR_ADDR 0xd02115a0
#define REG_EM_BT_RXDESC_SIZE 14
#define LBRT_TX_PWR_FIX (3)
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc0000050)
#define DEFAULT_XTAL_FCAP 0x8080
#define BT_ERRORTYPESTAT_ADDR (0xd0220060)
#define MAX_NB_ACTIVE_ACL (3)
#elif defined(CHIP_BEST2300P) || defined(CHIP_BEST2300A) || defined(CHIP_BEST1400) || defined(CHIP_BEST1402) || defined(__FPGA_BT_1400__) || defined(CHIP_BEST2001)
#define BT_EM_ADDR_BASE (0xD02111A2)
#define BT_EM_SIZE (110)
#define BLE_EM_CS_SIZE (90)
#define EM_BT_PWRCNTL_ADDR (BT_EM_ADDR_BASE + 0x16)
#define EM_BT_BT_EXT1_ADDR (BT_EM_ADDR_BASE + 0x66)
#define EM_BT_BT_EXT2_ADDR (BT_EM_ADDR_BASE + 0x68)
#define EM_BT_BITOFF_ADDR (BT_EM_ADDR_BASE + 0x02)
#define EM_BT_CLKOFF0_ADDR (BT_EM_ADDR_BASE + 0x04)
#define EM_BT_CLKOFF1_ADDR (BT_EM_ADDR_BASE + 0x06)
#define EM_BT_WINCNTL_ADDR (BT_EM_ADDR_BASE + 0x1A)
#define EM_BT_RXBIT_ADDR (BT_EM_ADDR_BASE + 0x56)
#define EM_BT_BTADDR1_ADDR (BT_EM_ADDR_BASE + 0xC)
#define EM_BT_LINKCNTL_ADDR (BT_EM_ADDR_BASE + 0x8)
#define BLE_CRCINIT1_ADDR (0xd02100c2)
#define EM_BT_RXDESCCNT_ADDR (BT_EM_ADDR_BASE + 0x5A)
#define BLE_MAXEVTIME_ADDR (0xd02100d0)
#define EM_BT_AUDIOBUF_OFF 0xd02144fc
#define EM_BT_RXACLBUFPTR_ADDR 0xd02115f8
#define REG_EM_BT_RXDESC_SIZE 16
#define LBRT_TX_PWR_FIX (3)
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc0000050)
#define BT_ERRORTYPESTAT_ADDR (0xd0220060)
#define MAX_NB_ACTIVE_ACL (3)
#ifdef CHIP_BEST2300A
#define DEFAULT_XTAL_FCAP 0x80ad //8pf crstal No cap by luobin
#else
#define DEFAULT_XTAL_FCAP 0x8080
#endif
#elif defined(__FPGA_BT_1500__)
#define BT_EM_ADDR_BASE (0xD0215000)
#define BT_EM_SIZE (104)
#define BLE_EM_CS_SIZE (112)
#define EM_BT_PWRCNTL_ADDR (BT_EM_ADDR_BASE + 0x14)
#define EM_BT_BT_EXT1_ADDR (BT_EM_ADDR_BASE + 0x60)
#define EM_BT_BITOFF_ADDR //(BT_EM_ADDR_BASE + 0x02)
#define EM_BT_CLKOFF0_ADDR (BT_EM_ADDR_BASE + 0x02)
#define EM_BT_CLKOFF1_ADDR (BT_EM_ADDR_BASE + 0x04)
#define EM_BT_WINCNTL_ADDR (BT_EM_ADDR_BASE + 0x18)
#define EM_BT_RXCLKN0_ADDR (BT_EM_ADDR_BASE + 0x52)
#define EM_BT_RXCLKN1_ADDR (BT_EM_ADDR_BASE + 0x54)
#define EM_BT_RXBIT_ADDR (BT_EM_ADDR_BASE + 0x56)
#define EM_BT_BTADDR1_ADDR (BT_EM_ADDR_BASE + 0x8)
#define EM_BT_LINKCNTL_ADDR (BT_EM_ADDR_BASE + 0x6)
#define EM_BT_RXDESCCNT_ADDR (BT_EM_ADDR_BASE + 0x5A)
#define EM_BT_AUDIOBUF_OFF 0xd02144fc
#define EM_BT_RXACLBUFPTR_ADDR 0xd02115f8
#define REG_EM_BT_RXDESC_SIZE 16
#define LBRT_TX_PWR_FIX (3)
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc0000050)
#define BT_ERRORTYPESTAT_ADDR (0xd0220460)
#define DEFAULT_XTAL_FCAP 0x8080
#define MAX_NB_ACTIVE_ACL (4)
#else
#define BT_EM_ADDR_BASE (0xd0210190)
#define BT_EM_SIZE (96)
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc00064cc)
#endif
#ifndef __FPGA_BT_1500__
//#define FPGA_1303
#endif
//bt max slot clock
#define MAX_SLOT_CLOCK ((1L<<27) - 1)
// A slot is 625 us
#define SLOT_SIZE 625
#define XTAL_OFFSET 50
//#define __PASS_CI_TEST_SETTING__
#define BT_LOW_POWER_MODE 1
#define BT_HIGH_PERFORMANCE_MODE 2
//#define __ENABLE_LINK_POWER_CONTROL__
#define BT_RFMODE BT_LOW_POWER_MODE
//#define BT_RFMODE BT_HIGH_PERFORMANCE_MODE
//#define BT_50_FUNCTION
#define BT_POWERON 1
#define BT_POWEROFF 0
/// 8 bit access types
#define _8_Bit 8
/// 16 bit access types
#define _16_Bit 16
/// 32 bit access types
#define _32_Bit 32
#define BTDRV_PATCH_WRITING 0x0
#define BTDRV_PATCH_DONE 0x1
#define BTDRV_CFG_WRITING 0x0
#define BTDRV_CFG_DONE 0x1
#define HCI_DBG_RD_MEM_CMD_OPCODE 0xFC01
#define HCI_DBG_WR_MEM_CMD_OPCODE 0xFC02
#define HCI_DBG_DEL_PAR_CMD_OPCODE 0xFC03
#define HCI_DBG_FLASH_ID_CMD_OPCODE 0xFC05
#define HCI_DBG_FLASH_ER_CMD_OPCODE 0xFC06
#define HCI_DBG_FLASH_WR_CMD_OPCODE 0xFC07
#define HCI_DBG_FLASH_RD_CMD_OPCODE 0xFC08
#define HCI_DBG_RD_PAR_CMD_OPCODE 0xFC09
#define HCI_DBG_WR_PAR_CMD_OPCODE 0xFC0A
#define HCI_DBG_WLAN_COEX_CMD_OPCODE 0xFC0B
#define HCI_DBG_ENTER_TEST_MODE_CMD_OPCODE 0xFC0C
#define HCI_DBG_WLAN_COEXTST_SCEN_CMD_OPCODE 0xFC0D
#define HCI_DBG_SEND_LMP_CMD_OPCODE 0xFC0E
#define HCI_DBG_WR_SYNC_DATA_CFG_CMD_OPCODE 0xFC0F
#define HCI_DBG_RD_KE_STATS_CMD_OPCODE 0xFC10
#define HCI_DBG_PLF_RESET_CMD_OPCODE 0xFC11
#define HCI_DBG_RD_MEM_INFO_CMD_OPCODE 0xFC12
#define HCI_DBG_EMUL_TESTER_CMD_OPCODE 0xFC2D
#define HCI_DBG_SCATT_IMPROV_CMD_OPCODE 0xFC2E
#define HCI_DBG_RF_REG_RD_CMD_OPCODE 0xFC39
#define HCI_DBG_RF_REG_WR_CMD_OPCODE 0xFC3A
#define HCI_DBG_HW_REG_RD_CMD_OPCODE 0xFC30
#define HCI_DBG_HW_REG_WR_CMD_OPCODE 0xFC31
#define HCI_DBG_SET_BD_ADDR_CMD_OPCODE 0xFC32
#define HCI_DBG_SET_TYPE_PUB_CMD_OPCODE 0xFC33
#define HCI_DBG_SET_TYPE_RAND_CMD_OPCODE 0xFC34
#define HCI_DBG_SET_CRC_CMD_OPCODE 0xFC35
#define HCI_DBG_LLCP_DISCARD_CMD_OPCODE 0xFC36
#define HCI_DBG_RESET_RX_CNT_CMD_OPCODE 0xFC37
#define HCI_DBG_RESET_TX_CNT_CMD_OPCODE 0xFC38
#define HCI_DBG_SET_TX_PW_CMD_OPCODE 0xFC3B
#define HCI_DBG_SET_SYNCWORD_CMD_OPCODE 0xFC3C
//encrytion min and max key size
#define HCI_DBG_SET_ENCRYPTION_KEY_SIZE_CMD_OPCODE 0xFC41
//preferred key type default :combine key
#define HCI_DBG_SET_PREFERRED_KEY_TYPE_CMD_OPCODE 0xFC42
//creat unit key
#define HCI_DBG_CREAT_UNIT_KEY_CMD_OPCODE 0xFC43
//set clk drift and jitter
#define HCI_DBG_SET_LPCLK_DRIFT_JITTER_CMD_OPCODE 0xFC44
//change uart buadrate
#define HCI_DBG_CHANGE_UART_BAUDRATE_CMD_OPCODE 0xFC46
//set sleep enable and external wakeup enable
#define HCI_DBG_SET_SLEEP_EXWAKEUP_EN_CMD_OPCODE 0xFC47
//set private key
#define HCI_DBG_SET_SP_PRIVATE_KEY_CMD_OPCODE 0xFC48
//set public key
#define HCI_DBG_SET_SP_PUBLIC_KEY_CMD_OPCODE 0xFC49
//set errdata adopted
#define HCI_DBG_SET_ERRDATA_ADOPTED_CMD_OPCODE 0xFC4A
//set basic threshold
#define HCI_DBG_SET_BASIC_THRESHOLD_CMD_OPCODE 0xFC4B
//set edr threshold
#define HCI_DBG_SET_EDR_THRESHOLD_CMD_OPCODE 0xFC4C
//set basic algorithm
#define HCI_DBG_SET_BASIC_ALGORITHM_CMD_OPCODE 0xFC4D
//set edr alorithm
#define HCI_DBG_SET_EDR_ALGORITHM_CMD_OPCODE 0xFC4E
//set basic packet lut
#define HCI_DBG_SET_BASIC_PKT_LUT_CMD_OPCODE 0xFC4F
//set edr packet lut
#define HCI_DBG_SET_EDR_PKT_LUT_CMD_OPCODE 0xFC50
//set diag_bt_hw
#define HCI_DBG_SET_DIAG_BT_HW_CMD_OPCODE 0xFC54
//set diag ble hw
#define HCI_DBG_SET_DIAG_BLE_HW_CMD_OPCODE 0xFC55
//set diag sw
#define HCI_DBG_SET_DIAG_SW_CMD_OPCODE 0xFC56
//set ble channel assessment parameter
#define HCI_DBG_SET_BLE_CA_PARA_CMD_OPCODE 0xFC57
//set ble rf timing
//set ble rf timig
//set ble rl size
#define HCI_DBG_SET_RL_SIZE_CMD_OPCODE 0xFC5D
///set hostwake
#define HCI_DBG_SET_HOSTWAKE_CMD_OPCODE 0xFC5E
//reserved for VCO test
#define HCI_DBG_BT_VCO_TEST_CMD_OPCODE 0xFCAA
#if defined(CHIP_BEST2300) || defined(CHIP_BEST2300P) || \
defined(CHIP_BEST2300A) || defined(CHIP_BEST2001) || \
defined(CHIP_BEST1400) || defined(CHIP_BEST1402) || \
defined(__FPGA_BT_2300__) ||defined(__FPGA_BT_1400__) || \
defined(__FPGA_BT_1500__)
///set dle dft value
#define HCI_DBG_WR_DLE_DFT_VALUE_CMD_OPCODE 0xFC41
//set exernal wake up time oscillater wakeup time and radio wakeup time
#define HCI_DBG_SET_WAKEUP_TIME_CMD_OPCODE 0xFC71
#define HCI_DBG_SET_SLEEP_SETTING_CMD_OPCODE 0xFC77
//bt address not ble address
#define HCI_DBG_SET_BT_ADDR_CMD_OPCODE 0xFC72
//set pcm setting
#define HCI_DBG_SET_PCM_SETTING_CMD_OPCODE 0xFC74
#define HCI_DBG_SET_RSSI_THRHLD_CMD_OPCODE 0xFC76
//set sync buff size
#define HCI_DBG_SET_SYNC_BUF_SIZE_CMD_OPCODE 0xFC7F
//set afh algorithm
#define HCI_DBG_SET_AFH_ALGORITHM_CMD_OPCODE 0xFC80
//set local feature
#define HCI_DBG_SET_LOCAL_FEATURE_CMD_OPCODE 0xFC81
#define HCI_DBG_SET_BT_RF_TIMING_CMD_OPCODE 0xFC83
//set local extend feature
#define HCI_DBG_SET_LOCAL_EX_FEATURE_CMD_OPCODE 0xFC82
#define HCI_DBG_SET_2300_BT_RF_TIMING_CMD_OPCODE 0xFC83
#define HCI_DBG_SET_BLE_RF_TIMING_CMD_OPCODE 0xfc84
//bt setting interface
#define HCI_DBG_SET_BT_SETTING_CMD_OPCODE 0xFC86
// xiao add for nonsignaling test mode
#define HCI_DBG_NONSIG_TESTER_SETUP_CMD_OPCODE 0xFC87
/* xiao add for custom set param*/
#define HCI_DBG_SET_CUSTOM_PARAM_CMD_OPCODE 0xFC88
#define HCI_DBG_SET_SCO_SWITCH_CMD_OPCODE 0xFC89
#define HCI_DBG_SET_SNIFFER_ENV_CMD_OPCODE 0xFC8E
//set sco path
#define HCI_DBG_SET_SYNC_CONFIG_CMD_OPCODE 0xFC8F
#define HCI_DBG_START_TWS_EXCHANGE_CMD_OPCODE 0xFC91
#define HCI_DBG_BTADDR_EXCHANGE_CMD_OPCODE 0xFC92
#define HCI_DBG_SEND_DATA_TO_PEER_DEV_CMD_OPCODE 0xFC93
#define HCI_DBG_SCO_TX_SILENCE_CMD_OPCODE 0xFC94
#define HCI_DBG_SNIFFER_CMD_OPCODE 0xFC95
#define HCI_DBG_CSB_UPDATE_LINK_PARAM_CMD_OPCODE 0xFC96
#define HCI_DBG_SET_LINK_LBRT_CMD_OPCODE 0xFC97
#define HCI_DBG_SET_CON_SLV_BCST_DATA_CMD_OPCODE 0xFC98
#define HCI_DBG_SET_ROLE_SWITCH_INSTANT_CMD_OPCODE 0xFC99
#define HCI_DBG_LOW_LAYER_METRICS_CMD_OPCODE 0xFC9B
#define HCI_DBG_LMP_MESSAGE_RECORD_CMD_OPCODE 0xFC9C
#define HCI_DBG_SET_LOCAL_FEATURE_50_CMD_OPCODE 0xFC72
#define HCI_DBG_SET_SLEEP_SETTING_50_CMD_OPCODE 0xFC70
#define HCI_DBG_SET_BT_SETTING_50_CMD_OPCODE 0xFC71
#define HCI_DBG_SET_CUSTOM_PARAM_50_CMD_OPCODE 0xFC73
#define HCI_DBG_SET_BT_SETTING_EXT1_CMD_OPCODE 0xFCAE
#define HCI_DBG_SET_BT_TWS_LINK_CMD_OPCODE 0xFCAF
#define HCI_DBG_SET_AFH_FOLLOW_CMD_OPCODE 0xFCB0
#define HCI_DBG_SET_RF_RX_GAIN_THS_TBL_CMD_OPCODE 0xFCB1
#define HCI_DBG_SET_RF_RX_GAIN_FIXED_CMD_OPCODE 0xFCB2
#define HCI_DBG_SET_BT_SETTING_EXT2_CMD_OPCODE 0xFCB3
#define HCI_DBG_SET_IBRT_TEST_MODE_CMD_OPCODE 0xFCB4
#define HCI_DBG_SET_BT_LOCAL_CLK_CMD_OPCODE 0xFCB5
#define HCI_DBG_SET_FUNC_PATCH_CMD_OPCODE 0xFCB8
#define HCI_DBG_SET_TXPWR_MODE_CMD_OPCODE 0xFCB9
#define HCI_DBG_SET_SW_RSSI_CMD_OPCODE 0xFCBA
#define HCI_DBG_SET_ECC_DATA_TEST_CMD_OPCODE 0xFCBB
#define HCI_DBG_SET_IBRT_DATA_TEST_CMD_OPCODE 0xFCBC
#define HCI_DBG_SET_NWINSZ_RXGRN_TO_CMD_OPCODE 0xFCBD
#define HCI_DBG_ENABLE_SOFTBIT_CMD_OPCODE 0xFCBE
#else
//bt address not ble address
#define HCI_DBG_SET_BT_ADDR_CMD_OPCODE 0xFC40
//set exernal wake up time oscillater wakeup time and radio wakeup time
#define HCI_DBG_SET_WAKEUP_TIME_CMD_OPCODE 0xFC45
//set sco path
#define HCI_DBG_SET_SYNC_CONFIG_CMD_OPCODE 0xFC51
//set pcm setting
#define HCI_DBG_SET_PCM_SETTING_CMD_OPCODE 0xFC52
//set sync buff size
#define HCI_DBG_SET_SYNC_BUF_SIZE_CMD_OPCODE 0xFC53
//set local feature
#define HCI_DBG_SET_LOCAL_FEATURE_CMD_OPCODE 0xFC59
//bt setting interface
#define HCI_DBG_SET_BT_SETTING_CMD_OPCODE 0xFC5F
//set afh algorithm
#define HCI_DBG_SET_AFH_ALGORITHM_CMD_OPCODE 0xFC58
//set local extend feature
#define HCI_DBG_SET_LOCAL_EX_FEATURE_CMD_OPCODE 0xFC5A
#define HCI_DBG_SET_BT_RF_TIMING_CMD_OPCODE 0xFC5B
#define HCI_DBG_SET_BLE_RF_TIMING_CMD_OPCODE 0xFC5C
// xiao add for nonsignaling test mode
#define HCI_DBG_NONSIG_TESTER_SETUP_CMD_OPCODE 0xFC60
/* xiao add for custom set param*/
#define HCI_DBG_SET_CUSTOM_PARAM_CMD_OPCODE 0xFC61
#define HCI_DBG_SET_SCO_SWITCH_CMD_OPCODE 0xFC62
#define HCI_DBG_SET_SNIFFER_ENV_CMD_OPCODE 0xFC67
#define HCI_DBG_START_TWS_EXCHANGE_CMD_OPCODE 0xFC69
#define HCI_DBG_BTADDR_EXCHANGE_CMD_OPCODE 0xFC6A
#define HCI_DBG_SEND_DATA_TO_PEER_DEV_CMD_OPCODE 0xFC6B
#define HCI_DBG_SCO_TX_SILENCE_CMD_OPCODE 0xFC6C
#define HCI_DBG_SNIFFER_CMD_OPCODE 0xFC6D
#define HCI_DBG_BT_VCO_TEST_CMD_OPCODE 0xFCAA
// Only new controller IP has this funciton,it is a error opcode
#define HCI_DBG_SET_ROLE_SWITCH_INSTANT_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_LINK_LBRT_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_BT_SETTING_EXT1_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_BT_TWS_LINK_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_AFH_FOLLOW_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_RF_RX_GAIN_THS_TBL_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_RF_RX_GAIN_FIXED_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_BT_SETTING_EXT2_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_IBRT_TEST_MODE_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_BT_LOCAL_CLK_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_FUNC_PATCH_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_TXPWR_MODE_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_SW_RSSI_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_ECC_DATA_TEST_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_IBRT_DATA_TEST_CMD_OPCODE 0xFCFF
#define HCI_DBG_SET_NWINSZ_RXGRN_TO_CMD_OPCODE 0xFCFF
#define HCI_DBG_ENABLE_SOFTBIT_CMD_OPCODE 0xFCFF
#endif // 2300, 2300p, 1400,1402,1501
extern void btdrv_poweron(uint8_t en);
extern void btdrv_hciopen(void);
#ifdef __cplusplus
}
#endif
#endif