pinebuds/platform/cmsis/inc/ca/irq_ctrl.h

187 lines
8.1 KiB
C

/**************************************************************************//**
* @file irq_ctrl.h
* @brief Interrupt Controller API header file
* @version V1.0.0
* @date 23. June 2017
******************************************************************************/
/*
* Copyright (c) 2017 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined ( __ICCARM__ )
#pragma system_include /* treat file as system include file for MISRA check */
#elif defined (__clang__)
#pragma clang system_header /* treat file as system include file */
#endif
#ifndef IRQ_CTRL_H_
#define IRQ_CTRL_H_
#include <stdint.h>
#ifndef IRQHANDLER_T
#define IRQHANDLER_T
/// Interrupt handler data type
typedef void (*IRQHandler_t) (void);
#endif
#ifndef IRQN_ID_T
#define IRQN_ID_T
/// Interrupt ID number data type
typedef int32_t IRQn_ID_t;
#endif
/* Interrupt mode bit-masks */
#define IRQ_MODE_TRIG_Pos (0U)
#define IRQ_MODE_TRIG_Msk (0x07UL /*<< IRQ_MODE_TRIG_Pos*/)
#define IRQ_MODE_TRIG_LEVEL (0x00UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: level triggered interrupt
#define IRQ_MODE_TRIG_LEVEL_LOW (0x01UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: low level triggered interrupt
#define IRQ_MODE_TRIG_LEVEL_HIGH (0x02UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: high level triggered interrupt
#define IRQ_MODE_TRIG_EDGE (0x04UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: edge triggered interrupt
#define IRQ_MODE_TRIG_EDGE_RISING (0x05UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising edge triggered interrupt
#define IRQ_MODE_TRIG_EDGE_FALLING (0x06UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: falling edge triggered interrupt
#define IRQ_MODE_TRIG_EDGE_BOTH (0x07UL /*<< IRQ_MODE_TRIG_Pos*/) ///< Trigger: rising and falling edge triggered interrupt
#define IRQ_MODE_TYPE_Pos (3U)
#define IRQ_MODE_TYPE_Msk (0x01UL << IRQ_MODE_TYPE_Pos)
#define IRQ_MODE_TYPE_IRQ (0x00UL << IRQ_MODE_TYPE_Pos) ///< Type: interrupt source triggers CPU IRQ line
#define IRQ_MODE_TYPE_FIQ (0x01UL << IRQ_MODE_TYPE_Pos) ///< Type: interrupt source triggers CPU FIQ line
#define IRQ_MODE_DOMAIN_Pos (4U)
#define IRQ_MODE_DOMAIN_Msk (0x01UL << IRQ_MODE_DOMAIN_Pos)
#define IRQ_MODE_DOMAIN_NONSECURE (0x00UL << IRQ_MODE_DOMAIN_Pos) ///< Domain: interrupt is targeting non-secure domain
#define IRQ_MODE_DOMAIN_SECURE (0x01UL << IRQ_MODE_DOMAIN_Pos) ///< Domain: interrupt is targeting secure domain
#define IRQ_MODE_CPU_Pos (5U)
#define IRQ_MODE_CPU_Msk (0xFFUL << IRQ_MODE_CPU_Pos)
#define IRQ_MODE_CPU_ALL (0x00UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets all CPUs
#define IRQ_MODE_CPU_0 (0x01UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 0
#define IRQ_MODE_CPU_1 (0x02UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 1
#define IRQ_MODE_CPU_2 (0x04UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 2
#define IRQ_MODE_CPU_3 (0x08UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 3
#define IRQ_MODE_CPU_4 (0x10UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 4
#define IRQ_MODE_CPU_5 (0x20UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 5
#define IRQ_MODE_CPU_6 (0x40UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 6
#define IRQ_MODE_CPU_7 (0x80UL << IRQ_MODE_CPU_Pos) ///< CPU: interrupt targets CPU 7
#define IRQ_MODE_ERROR (0x80000000UL) ///< Bit indicating mode value error
/* Interrupt priority bit-masks */
#define IRQ_PRIORITY_Msk (0x0000FFFFUL) ///< Interrupt priority value bit-mask
#define IRQ_PRIORITY_ERROR (0x80000000UL) ///< Bit indicating priority value error
/// Initialize interrupt controller.
/// \return 0 on success, -1 on error.
int32_t IRQ_Initialize (void);
/// Register interrupt handler.
/// \param[in] irqn interrupt ID number
/// \param[in] handler interrupt handler function address
/// \return 0 on success, -1 on error.
int32_t IRQ_SetHandler (IRQn_ID_t irqn, IRQHandler_t handler);
/// Get the registered interrupt handler.
/// \param[in] irqn interrupt ID number
/// \return registered interrupt handler function address.
IRQHandler_t IRQ_GetHandler (IRQn_ID_t irqn);
/// Enable interrupt.
/// \param[in] irqn interrupt ID number
/// \return 0 on success, -1 on error.
int32_t IRQ_Enable (IRQn_ID_t irqn);
/// Disable interrupt.
/// \param[in] irqn interrupt ID number
/// \return 0 on success, -1 on error.
int32_t IRQ_Disable (IRQn_ID_t irqn);
/// Get interrupt enable state.
/// \param[in] irqn interrupt ID number
/// \return 0 - interrupt is disabled, 1 - interrupt is enabled.
uint32_t IRQ_GetEnableState (IRQn_ID_t irqn);
/// Configure interrupt request mode.
/// \param[in] irqn interrupt ID number
/// \param[in] mode mode configuration
/// \return 0 on success, -1 on error.
int32_t IRQ_SetMode (IRQn_ID_t irqn, uint32_t mode);
/// Get interrupt mode configuration.
/// \param[in] irqn interrupt ID number
/// \return current interrupt mode configuration with optional IRQ_MODE_ERROR bit set.
uint32_t IRQ_GetMode (IRQn_ID_t irqn);
/// Get ID number of current interrupt request (IRQ).
/// \return interrupt ID number.
IRQn_ID_t IRQ_GetActiveIRQ (void);
/// Get ID number of current fast interrupt request (FIQ).
/// \return interrupt ID number.
IRQn_ID_t IRQ_GetActiveFIQ (void);
/// Signal end of interrupt processing.
/// \param[in] irqn interrupt ID number
/// \return 0 on success, -1 on error.
int32_t IRQ_EndOfInterrupt (IRQn_ID_t irqn);
/// Set interrupt pending flag.
/// \param[in] irqn interrupt ID number
/// \return 0 on success, -1 on error.
int32_t IRQ_SetPending (IRQn_ID_t irqn);
/// Get interrupt pending flag.
/// \param[in] irqn interrupt ID number
/// \return 0 - interrupt is not pending, 1 - interrupt is pending.
uint32_t IRQ_GetPending (IRQn_ID_t irqn);
/// Clear interrupt pending flag.
/// \param[in] irqn interrupt ID number
/// \return 0 on success, -1 on error.
int32_t IRQ_ClearPending (IRQn_ID_t irqn);
/// Set interrupt priority value.
/// \param[in] irqn interrupt ID number
/// \param[in] priority interrupt priority value
/// \return 0 on success, -1 on error.
int32_t IRQ_SetPriority (IRQn_ID_t irqn, uint32_t priority);
/// Get interrupt priority.
/// \param[in] irqn interrupt ID number
/// \return current interrupt priority value with optional IRQ_PRIORITY_ERROR bit set.
uint32_t IRQ_GetPriority (IRQn_ID_t irqn);
/// Set priority masking threshold.
/// \param[in] priority priority masking threshold value
/// \return 0 on success, -1 on error.
int32_t IRQ_SetPriorityMask (uint32_t priority);
/// Get priority masking threshold
/// \return current priority masking threshold value with optional IRQ_PRIORITY_ERROR bit set.
uint32_t IRQ_GetPriorityMask (void);
/// Set priority grouping field split point
/// \param[in] bits number of MSB bits included in the group priority field comparison
/// \return 0 on success, -1 on error.
int32_t IRQ_SetPriorityGroupBits (uint32_t bits);
/// Get priority grouping field split point
/// \return current number of MSB bits included in the group priority field comparison with
/// optional IRQ_PRIORITY_ERROR bit set.
uint32_t IRQ_GetPriorityGroupBits (void);
#endif // IRQ_CTRL_H_