pinebuds/config/best2300p_ibrt_anc/target.mk

424 lines
7.0 KiB
Makefile

CHIP ?= best2300p
DEBUG ?= 1
FPGA ?= 0
MBED ?= 0
RTOS ?= 1
#KERNEL ?= FREERTOS
LIBC_ROM ?= 1
export USER_SECURE_BOOT ?= 0
# enable:1
# disable:0
WATCHER_DOG ?= 0
DEBUG_PORT ?= 1
# 0: usb
# 1: uart0
# 2: uart1
FLASH_CHIP ?= ALL
# GD25Q80C
# GD25Q32C
# ALL
export NO_TRACE_TIME_STAMP ?=1
export FORCE_SIGNALINGMODE ?= 0
export FORCE_NOSIGNALINGMODE ?= 0
export FORCE_SCO_MAX_RETX ?= 0
export FA_RX_GAIN_CTRL ?= 1
export BT_FA_ECC ?= 0
export CONTROLLER_DUMP_ENABLE ?= 0
export CONTROLLER_MEM_LOG_ENABLE ?= 0
export INTERSYS_DEBUG ?= 1
export PROFILE_DEBUG ?= 0
export BTDUMP_ENABLE ?= 0
export BT_DEBUG_TPORTS ?= 0
TPORTS_KEY_COEXIST ?= 0
export SNIFF_MODE_CHECK ?= 0
AUDIO_OUTPUT_MONO ?= 0
AUDIO_OUTPUT_DIFF ?= 0
#### ANC DEFINE START ######
export ANC_APP ?= 0
export ANC_FF_ENABLED ?= 0
export ANC_FB_ENABLED ?= 0
export AUDIO_ANC_FB_MC ?= 0
export AUDIO_SECTION_SUPPT ?= 0
export AUD_SECTION_STRUCT_VERSION ?= 2
export AUDIO_ANC_FB_MC_HW ?=0
export APP_ANC_KEY ?= 0
export ANC_FB_CHECK ?= 0
##### ANC DEFINE END ######
APP_ANC_TEST ?= 0
TEST_OVER_THE_AIR ?= 0
HW_FIR_EQ_PROCESS ?= 0
SW_IIR_EQ_PROCESS ?= 1
HW_DAC_IIR_EQ_PROCESS ?= 0
HW_IIR_EQ_PROCESS ?= 0
HW_DC_FILTER_WITH_IIR ?= 0
AUDIO_DRC ?= 0
AUDIO_DRC2 ?= 0
PC_CMD_UART ?= 0
AUDIO_SECTION_ENABLE ?= 0
AUDIO_RESAMPLE ?= 1
RESAMPLE_ANY_SAMPLE_RATE ?= 1
OSC_26M_X4_AUD2BB ?= 1
AUDIO_OUTPUT_VOLUME_DEFAULT ?= 17
# range:1~16
AUDIO_INPUT_CAPLESSMODE ?= 0
AUDIO_INPUT_LARGEGAIN ?= 0
AUDIO_CODEC_ASYNC_CLOSE ?= 0
AUDIO_SCO_BTPCM_CHANNEL ?= 1
export A2DP_CP_ACCEL ?= 1
export SCO_CP_ACCEL ?= 1
export SCO_TRACE_CP_ACCEL ?= 0
# For TWS SCO DMA snapshot and low delay
export PCM_FAST_MODE ?= 1
export CVSD_BYPASS ?= 1
export LOW_DELAY_SCO ?= 0
SPEECH_TX_DC_FILTER ?= 1
SPEECH_TX_AEC2FLOAT ?= 1
SPEECH_TX_NS3 ?= 0
SPEECH_TX_2MIC_NS2 ?= 0
SPEECH_TX_COMPEXP ?= 1
SPEECH_TX_EQ ?= 0
SPEECH_TX_POST_GAIN ?= 0
SPEECH_RX_NS2FLOAT ?= 0
SPEECH_RX_EQ ?= 0
SPEECH_RX_POST_GAIN ?= 0
LARGE_RAM ?= 1
HSP_ENABLE ?= 0
HFP_1_6_ENABLE ?= 1
BTIF_HID_DEVICE ?= 1
MSBC_PLC_ENABLE ?= 1
MSBC_PLC_ENCODER ?= 1
MSBC_16K_SAMPLE_RATE ?= 1
SBC_FUNC_IN_ROM ?= 0
ROM_UTILS_ON ?= 0
APP_LINEIN_A2DP_SOURCE ?= 0
APP_I2S_A2DP_SOURCE ?= 0
VOICE_PROMPT ?= 1
#### Google related feature ####
# the overall google service switch
# currently, google service includes BISTO and GFPS
export GOOGLE_SERVICE_ENABLE ?= 0
# BISTO is a GVA service on Bluetooth audio device
# BISTO is an isolated service relative to GFPS
export BISTO_ENABLE ?= 0
# GSOUND_HOTWORD is a hotword library running on Bluetooth audio device
# GSOUND_HOTWORD is a subset of BISTO
export GSOUND_HOTWORD_ENABLE ?= 0
# GFPS is google fastpair service
# GFPS is an isolated service relative to BISTO
export GFPS_ENABLE ?= 0
#### Google related feature ####
export BTIF_HID_DEVICE ?= 1
ifeq ($(BTIF_HID_DEVICE),1)
KBUILD_CPPFLAGS += -DBTIF_HID_DEVICE
endif
BLE ?= 0
TOTA ?= 0
OTA_ENABLE ?= 1
TILE_DATAPATH_ENABLED ?= 0
CUSTOM_INFORMATION_TILE_ENABLE ?= 0
INTERCONNECTION ?= 0
INTERACTION ?= 0
INTERACTION_FASTPAIR ?= 0
BT_ONE_BRING_TWO ?= 0
DSD_SUPPORT ?= 0
A2DP_EQ_24BIT ?= 1
A2DP_AAC_ON ?= 1
A2DP_SCALABLE_ON ?= 0
A2DP_LHDC_ON ?= 0
ifeq ($(A2DP_LHDC_ON),1)
A2DP_LHDC_V3 ?= 1
A2DP_LHDC_LARC ?= 0
export FLASH_UNIQUE_ID ?= 1
endif
A2DP_LDAC_ON ?= 0
export TX_RX_PCM_MASK ?= 0
A2DP_SCALABLE_ON ?= 0
FACTORY_MODE ?= 1
ENGINEER_MODE ?= 1
ULTRA_LOW_POWER ?= 1
DAC_CLASSG_ENABLE ?= 1
NO_SLEEP ?= 0
CORE_DUMP ?= 1
CORE_DUMP_TO_FLASH ?= 0
ENHANCED_STACK ?= 1
export SYNC_BT_CTLR_PROFILE ?= 0
export A2DP_DECODER_VER := 2
export IBRT ?= 1
export IBRT_SEARCH_UI ?= 1
export BES_AUD ?= 1
export POWER_MODE ?= DIG_DCDC
export BT_RF_PREFER ?= 2M
export SPEECH_CODEC ?= 1
export TWS_PROMPT_SYNC ?= 0
export MIX_AUDIO_PROMPT_WITH_A2DP_MEDIA_ENABLED ?= 0
export FLASH_SIZE ?= 0x400000
export FLASH_SUSPEND ?= 1
ifeq ($(DSD_SUPPORT),1)
export BTUSB_AUDIO_MODE ?= 1
export AUDIO_INPUT_MONO ?= 1
export USB_ISO ?= 1
export USB_AUDIO_DYN_CFG ?= 1
export DELAY_STREAM_OPEN ?= 0
export KEEP_SAME_LATENCY ?= 1
export HW_FIR_DSD_PROCESS ?= 1
ifeq ($(HW_FIR_DSD_PROCESS),1)
ifeq ($(CHIP),best2300)
export HW_FIR_DSD_BUF_MID_ADDR ?= 0x200A0000
export DATA_BUF_START ?= 0x20040000
endif
endif
export USB_AUDIO_UAC2 ?= 1
export USB_HIGH_SPEED ?= 1
KBUILD_CPPFLAGS += \
-DHW_FIR_DSD_BUF_MID_ADDR=$(HW_FIR_DSD_BUF_MID_ADDR) \
-DDATA_BUF_START=$(DATA_BUF_START)
endif
USE_THIRDPARTY ?= 0
export USE_KNOWLES ?= 0
export USE_CYBERON ?= 0
ifeq ($(CURRENT_TEST),1)
export VCODEC_VOLT ?= 1.6V
export VANA_VOLT ?= 1.35V
else
endif
export LAURENT_ALGORITHM ?= 0
export TX_IQ_CAL ?= 0
export BT_XTAL_SYNC ?= 1
export BTADDR_FOR_DEBUG ?= 1
export POWERKEY_I2C_SWITCH ?=0
AUTO_TEST ?= 0
export DUMP_NORMAL_LOG ?= 0
SUPPORT_BATTERY_REPORT ?= 1
SUPPORT_HF_INDICATORS ?= 0
SUPPORT_SIRI ?= 1
BES_AUDIO_DEV_Main_Board_9v0 ?= 0
APP_USE_LED_INDICATE_IBRT_STATUS ?= 0
export BT_EXT_LNA_PA ?=0
export BT_EXT_LNA ?=0
export BT_EXT_PA ?=0
ifeq ($(A2DP_LHDC_ON),1)
AUDIO_BUFFER_SIZE := 140*1024
else
AUDIO_BUFFER_SIZE := 100*1024
endif
export TRACE_BUF_SIZE := 16*1024
export TRACE_BAUD_RATE := 10*115200
init-y :=
core-y := platform/ services/ apps/ utils/cqueue/ utils/list/ services/multimedia/ utils/intersyshci/
KBUILD_CPPFLAGS += -Iplatform/cmsis/inc \
-Iservices/audioflinger \
-Iplatform/hal \
-Iservices/fs/ \
-Iservices/fs/sd \
-Iservices/fs/fat \
-Iservices/fs/fat/ChaN
KBUILD_CPPFLAGS += \
-DAPP_AUDIO_BUFFER_SIZE=$(AUDIO_BUFFER_SIZE) \
-DCHARGER_PLUGINOUT_RESET=0 \
-D__APP_KEY_FN_STYLE_A__
ifeq ($(APP_ANC_KEY),1)
KBUILD_CPPFLAGS += -D__BT_ANC_KEY__
endif
ifeq ($(BES_AUDIO_DEV_Main_Board_9v0),1)
KBUILD_CPPFLAGS += -DBES_AUDIO_DEV_Main_Board_9v0
endif
ifeq ($(TPORTS_KEY_COEXIST),1)
KBUILD_CPPFLAGS += -DTPORTS_KEY_COEXIST
endif
#-DIBRT_LINK_LOWLAYER_MONITOR
#-D_AUTO_SWITCH_POWER_MODE__
#-D__APP_KEY_FN_STYLE_A__
#-D__APP_KEY_FN_STYLE_B__
#-D__EARPHONE_STAY_BOTH_SCAN__
#-D__POWERKEY_CTRL_ONOFF_ONLY__
#-DAUDIO_LINEIN
ifeq ($(CURRENT_TEST),1)
INTSRAM_RUN ?= 1
endif
ifeq ($(INTSRAM_RUN),1)
LDS_FILE := best1000_intsram.lds
else
LDS_FILE := best1000.lds
endif
ifeq ($(TOTA),1)
ifeq ($(BLE),1)
KBUILD_CPPFLAGS += -DBLE_TOTA_ENABLED
endif
KBUILD_CPPFLAGS += -DSHOW_RSSI
KBUILD_CPPFLAGS += -DTEST_OVER_THE_AIR_ENANBLED
export TEST_OVER_THE_AIR ?= 1
endif
ifneq ($(A2DP_DECODER_VER), )
KBUILD_CPPFLAGS += -DA2DP_DECODER_VER=$(A2DP_DECODER_VER)
endif
ifeq ($(ANC_APP),1)
KBUILD_CPPFLAGS += -DANC_APP
endif
ifeq ($(USE_CYBERON),1)
export THIRDPARTY_LIB ?= cyberon
KBUILD_CPPFLAGS += -D__CYBERON
export KWS_IN_RAM := 1
ifeq ($(KWS_IN_RAM),1)
CPPFLAGS_${LDS_FILE} += -DKWS_IN_RAM
endif #KWS_IN_RAM
endif #USE_CYBERON
KBUILD_CFLAGS +=
LIB_LDFLAGS += -lstdc++ -lsupc++
#CFLAGS_IMAGE += -u _printf_float -u _scanf_float
#LDFLAGS_IMAGE += --wrap main
export BTIF_HID_DEVICE ?= 1
ifeq ($(BTIF_HID_DEVICE),1)
KBUILD_CPPFLAGS += -DBTIF_HID_DEVICE
endif