684 lines
16 KiB
C
684 lines
16 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright 2015-2019 BES.
|
|
* All rights reserved. All unpublished rights reserved.
|
|
*
|
|
* No part of this work may be used or reproduced in any form or by any
|
|
* means, or stored in a database or retrieval system, without prior written
|
|
* permission of BES.
|
|
*
|
|
* Use of this work is governed by a license granted by BES.
|
|
* This work contains confidential and proprietary information of
|
|
* BES. which is protected by copyright, trade secret,
|
|
* trademark and other intellectual property rights.
|
|
*
|
|
****************************************************************************/
|
|
#include "plat_addr_map.h"
|
|
#include "hal_timer.h"
|
|
#define IGNORE_HAL_TIMER_RAW_API_CHECK
|
|
#include "hal_timer_raw.h"
|
|
#include "reg_timer.h"
|
|
#include "hal_location.h"
|
|
#include "hal_cmu.h"
|
|
#include "cmsis_nvic.h"
|
|
|
|
//#define ELAPSED_TIMER_ENABLED
|
|
|
|
#if defined(CHIP_BEST3001) || defined(CHIP_BEST3003) || defined(CHIP_BEST3005) || defined(CHIP_BEST1400) || defined(CHIP_BEST1402)
|
|
#define CLOCK_SYNC_WORKAROUND
|
|
#endif
|
|
|
|
#ifdef LOW_SYS_FREQ
|
|
#if defined(CHIP_BEST1305) || defined(CHIP_BEST1501) || \
|
|
defined(CHIP_BEST2300) || defined(CHIP_BEST2300P) || defined(CHIP_BEST2300A)
|
|
#define FAST_TIMER_WORKAROUND
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(__FPU_USED) && (__FPU_USED == 1)
|
|
//#define TIMER_USE_FPU
|
|
#endif
|
|
|
|
#define SLOW_TIMER_VAL_DELTA 1
|
|
#define SLOW_TIMER_VAL_DELTA_SLEEP 10
|
|
#define FAST_TIMER_VAL_DELTA 20
|
|
|
|
#ifdef CALIB_SLOW_TIMER
|
|
#define MAX_CALIB_SYSTICK_HZ (CONFIG_SYSTICK_HZ_NOMINAL * 2)
|
|
|
|
#define MIN_CALIB_TICKS (10 * (CONFIG_SYSTICK_HZ_NOMINAL / 1000))
|
|
|
|
#define MAX_CALIB_TICKS (30 * CONFIG_SYSTICK_HZ_NOMINAL)
|
|
|
|
static uint32_t BOOT_DATA_LOC sys_tick_hz = CONFIG_SYSTICK_HZ_NOMINAL;
|
|
static uint32_t BOOT_BSS_LOC slow_val;
|
|
static uint32_t BOOT_BSS_LOC fast_val;
|
|
#endif
|
|
|
|
static struct DUAL_TIMER_T * const BOOT_RODATA_SRAM_LOC dual_timer0 = (struct DUAL_TIMER_T *)TIMER0_BASE;
|
|
#ifdef TIMER1_BASE
|
|
static struct DUAL_TIMER_T * const BOOT_RODATA_SRAM_LOC dual_timer1 = (struct DUAL_TIMER_T *)TIMER1_BASE;
|
|
#endif
|
|
|
|
static HAL_TIMER_IRQ_HANDLER_T irq_handler = NULL;
|
|
|
|
//static uint32_t load_value = 0;
|
|
static uint32_t start_time;
|
|
|
|
static void POSSIBLY_UNUSED hal_timer00_irq_handler(void);
|
|
static void hal_timer01_irq_handler(void);
|
|
|
|
__STATIC_FORCEINLINE uint32_t get_timer_value(struct TIMER_T *timer, uint32_t delta)
|
|
{
|
|
#ifdef CLOCK_SYNC_WORKAROUND
|
|
uint32_t lock;
|
|
uint32_t v1, v2;
|
|
|
|
lock = int_lock();
|
|
do {
|
|
v1 = timer->Value;
|
|
v2 = timer->Value;
|
|
} while ((v1 < v2) || (v1 > v2 + delta));
|
|
int_unlock(lock);
|
|
|
|
return v2;
|
|
#else
|
|
return timer->Value;
|
|
#endif
|
|
}
|
|
|
|
__STATIC_FORCEINLINE void clear_timer_irq(struct TIMER_T *timer)
|
|
{
|
|
#ifdef CLOCK_SYNC_WORKAROUND
|
|
do {
|
|
timer->IntClr = 1;
|
|
} while (timer->RIS & TIMER_RIS_RIS);
|
|
#else
|
|
timer->IntClr = 1;
|
|
#endif
|
|
}
|
|
|
|
__STATIC_FORCEINLINE void set_timer_load(struct TIMER_T *timer, uint32_t load, uint32_t delta)
|
|
{
|
|
#ifdef CLOCK_SYNC_WORKAROUND
|
|
uint32_t lock;
|
|
uint32_t val;
|
|
|
|
lock = int_lock();
|
|
do {
|
|
timer->Load = load;
|
|
val = timer->Value;
|
|
} while ((load < val) || (load > val + delta));
|
|
int_unlock(lock);
|
|
#else
|
|
timer->Load = load;
|
|
#endif
|
|
}
|
|
|
|
__STATIC_FORCEINLINE void fast_timer_open(void)
|
|
{
|
|
#ifdef TIMER1_BASE
|
|
hal_cmu_timer1_select_fast();
|
|
dual_timer1->timer[0].Control = TIMER_CTRL_EN | TIMER_CTRL_PRESCALE_DIV_1 | TIMER_CTRL_SIZE_32_BIT;
|
|
#endif
|
|
}
|
|
|
|
void BOOT_TEXT_FLASH_LOC hal_sys_timer_open(void)
|
|
{
|
|
hal_cmu_timer0_select_slow();
|
|
dual_timer0->timer[0].Control = TIMER_CTRL_EN | TIMER_CTRL_PRESCALE_DIV_1 | TIMER_CTRL_SIZE_32_BIT;
|
|
fast_timer_open();;
|
|
}
|
|
|
|
#ifdef CORE_SLEEP_POWER_DOWN
|
|
void SRAM_TEXT_LOC hal_sys_timer_wakeup(void)
|
|
{
|
|
fast_timer_open();;
|
|
}
|
|
#endif
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_get(void)
|
|
{
|
|
return -get_timer_value(&dual_timer0->timer[0], SLOW_TIMER_VAL_DELTA);
|
|
}
|
|
|
|
#ifdef CLOCK_SYNC_WORKAROUND
|
|
uint32_t SRAM_TEXT_LOC hal_sys_timer_get_in_sleep(void)
|
|
{
|
|
return -get_timer_value(&dual_timer0->timer[0], SLOW_TIMER_VAL_DELTA_SLEEP);
|
|
}
|
|
#else
|
|
uint32_t hal_sys_timer_get_in_sleep(void) __attribute__((alias("hal_sys_timer_get")));
|
|
#endif
|
|
|
|
uint32_t BOOT_TEXT_FLASH_LOC flash_hal_sys_timer_get(void)
|
|
{
|
|
return -get_timer_value(&dual_timer0->timer[0], SLOW_TIMER_VAL_DELTA);
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_ms_get(void)
|
|
{
|
|
return GET_CURRENT_MS();
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_fast_sys_timer_get(void)
|
|
{
|
|
#ifdef TIMER1_BASE
|
|
#ifdef FAST_TIMER_WORKAROUND
|
|
if (hal_cmu_fast_timer_offline()) {
|
|
#ifdef TIMER_USE_FPU
|
|
return (uint32_t)(hal_sys_timer_get() * ((float)CONFIG_FAST_SYSTICK_HZ / CONFIG_SYSTICK_HZ));
|
|
#else
|
|
return (uint32_t)(hal_sys_timer_get() * (uint64_t)CONFIG_FAST_SYSTICK_HZ / CONFIG_SYSTICK_HZ);
|
|
#endif
|
|
}
|
|
#endif // FAST_TIMER_WORKAROUND
|
|
return -get_timer_value(&dual_timer1->timer[0], FAST_TIMER_VAL_DELTA);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
uint32_t hal_sys_timer_get_max(void)
|
|
{
|
|
return 0xFFFFFFFF;
|
|
}
|
|
|
|
void BOOT_TEXT_SRAM_LOC hal_sys_timer_delay(uint32_t ticks)
|
|
{
|
|
uint32_t start = hal_sys_timer_get();
|
|
|
|
while (hal_sys_timer_get() - start < ticks);
|
|
}
|
|
|
|
#ifdef CLOCK_SYNC_WORKAROUND
|
|
void SRAM_TEXT_LOC hal_sys_timer_delay_in_sleep(uint32_t ticks)
|
|
{
|
|
uint32_t start = hal_sys_timer_get_in_sleep();
|
|
|
|
while (hal_sys_timer_get_in_sleep() - start < ticks);
|
|
}
|
|
#else
|
|
void hal_sys_timer_delay_in_sleep(uint32_t ticks) __attribute__((alias("hal_sys_timer_delay")));
|
|
#endif
|
|
|
|
void BOOT_TEXT_FLASH_LOC flash_hal_sys_timer_delay(uint32_t ticks)
|
|
{
|
|
uint32_t start = flash_hal_sys_timer_get();
|
|
|
|
while (flash_hal_sys_timer_get() - start < ticks);
|
|
}
|
|
|
|
void BOOT_TEXT_SRAM_LOC hal_sys_timer_delay_us(uint32_t us)
|
|
{
|
|
#ifdef TIMER1_BASE
|
|
#ifdef FAST_TIMER_WORKAROUND
|
|
if (hal_cmu_fast_timer_offline()) {
|
|
uint32_t start = hal_sys_timer_get();
|
|
uint32_t ticks = US_TO_TICKS(us);
|
|
|
|
while (hal_sys_timer_get() - start < ticks);
|
|
}
|
|
#endif // FAST_TIMER_WORKAROUND
|
|
|
|
uint32_t start = hal_fast_sys_timer_get();
|
|
uint32_t ticks = US_TO_FAST_TICKS(us);
|
|
|
|
while (hal_fast_sys_timer_get() - start < ticks);
|
|
#else
|
|
enum HAL_CMU_FREQ_T freq = hal_cmu_sys_get_freq();
|
|
uint32_t loop;
|
|
uint32_t i;
|
|
|
|
// Assuming:
|
|
// 1) system clock uses audio PLL
|
|
// 2) audio PLL is configured as 48K series, 196.608M
|
|
// 3) crystal is 26M
|
|
|
|
if (freq == HAL_CMU_FREQ_208M) {
|
|
loop = 197;
|
|
} else if (freq == HAL_CMU_FREQ_104M) {
|
|
loop = 197 / 2;
|
|
} else if (freq == HAL_CMU_FREQ_78M) {
|
|
loop = 197 / 3;
|
|
} else if (freq == HAL_CMU_FREQ_52M) {
|
|
loop = 52;
|
|
} else {
|
|
loop = 26;
|
|
}
|
|
|
|
loop = loop * us / 5;
|
|
for (i = 0; i < loop; i++) {
|
|
asm volatile("nop");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
void SRAM_TEXT_LOC hal_sys_timer_delay_ns(uint32_t ns)
|
|
{
|
|
#ifdef TIMER1_BASE
|
|
#ifdef FAST_TIMER_WORKAROUND
|
|
if (hal_cmu_fast_timer_offline()) {
|
|
uint32_t start = hal_sys_timer_get();
|
|
uint32_t ticks = US_TO_TICKS((ns + (1000 - 1)) / 1000);
|
|
|
|
while (hal_sys_timer_get() - start < ticks);
|
|
}
|
|
#endif // FAST_TIMER_WORKAROUND
|
|
|
|
uint32_t start = hal_fast_sys_timer_get();
|
|
uint32_t ticks = NS_TO_FAST_TICKS(ns);
|
|
|
|
while (hal_fast_sys_timer_get() - start < ticks);
|
|
#else
|
|
enum HAL_CMU_FREQ_T freq = hal_cmu_sys_get_freq();
|
|
uint32_t loop;
|
|
uint32_t i;
|
|
|
|
// Assuming:
|
|
// 1) system clock uses audio PLL
|
|
// 2) audio PLL is configured as 48K series, 196.608M
|
|
// 3) crystal is 26M
|
|
|
|
if (freq == HAL_CMU_FREQ_208M) {
|
|
loop = 197;
|
|
} else if (freq == HAL_CMU_FREQ_104M) {
|
|
loop = 197 / 2;
|
|
} else if (freq == HAL_CMU_FREQ_78M) {
|
|
loop = 197 / 3;
|
|
} else if (freq == HAL_CMU_FREQ_52M) {
|
|
loop = 52;
|
|
} else {
|
|
loop = 26;
|
|
}
|
|
|
|
loop = loop * ns / 5000;
|
|
for (i = 0; i < loop; i++) {
|
|
asm volatile("nop");
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static uint32_t NOINLINE SRAM_TEXT_DEF(measure_cpu_freq_interval)(uint32_t cnt)
|
|
{
|
|
uint32_t start;
|
|
struct DUAL_TIMER_T *t;
|
|
uint32_t delta;
|
|
|
|
#ifdef TIMER1_BASE
|
|
t = dual_timer1;
|
|
delta = FAST_TIMER_VAL_DELTA;
|
|
#ifdef FAST_TIMER_WORKAROUND
|
|
if (hal_cmu_fast_timer_offline()) {
|
|
t = dual_timer0;
|
|
delta = SLOW_TIMER_VAL_DELTA;
|
|
}
|
|
#endif // FAST_TIMER_WORKAROUND
|
|
#else
|
|
t = dual_timer0;
|
|
delta = SLOW_TIMER_VAL_DELTA;
|
|
#endif
|
|
|
|
start = get_timer_value(&t->timer[0], delta);
|
|
|
|
asm volatile(
|
|
"_loop:;"
|
|
#ifdef __ARM_ARCH_ISA_ARM
|
|
"nop;"
|
|
"nop;"
|
|
#endif
|
|
"subs %0, #1;"
|
|
"cmp %0, #0;"
|
|
"bne _loop;"
|
|
: : "r"(cnt));
|
|
|
|
return start - get_timer_value(&t->timer[0], delta);
|
|
}
|
|
|
|
uint32_t hal_sys_timer_calc_cpu_freq(uint32_t interval_ms, int high_res)
|
|
{
|
|
uint32_t ref_freq;
|
|
uint32_t cnt;
|
|
uint32_t one_sec;
|
|
uint32_t lock;
|
|
uint32_t run_interval;
|
|
uint32_t base_interval;
|
|
uint32_t freq;
|
|
|
|
// Default measurement interval
|
|
if (interval_ms == 0) {
|
|
#ifdef TIMER1_BASE
|
|
interval_ms = 10;
|
|
#else
|
|
interval_ms = 100;
|
|
#endif
|
|
}
|
|
|
|
ref_freq = hal_cmu_get_crystal_freq();
|
|
// CPU loop cycle count
|
|
cnt = ref_freq / 4 * interval_ms / 1000;
|
|
|
|
// Timer ticks per second
|
|
#ifdef TIMER1_BASE
|
|
one_sec = CONFIG_FAST_SYSTICK_HZ;
|
|
#ifdef FAST_TIMER_WORKAROUND
|
|
if (hal_cmu_fast_timer_offline()) {
|
|
one_sec = CONFIG_SYSTICK_HZ;
|
|
}
|
|
#endif // FAST_TIMER_WORKAROUND
|
|
#else
|
|
if (high_res) {
|
|
one_sec = CONFIG_FAST_SYSTICK_HZ;
|
|
} else {
|
|
one_sec = CONFIG_SYSTICK_HZ;
|
|
}
|
|
#endif
|
|
// Timer ticks per measurement interval
|
|
base_interval = one_sec * interval_ms / 1000;
|
|
|
|
lock = int_lock();
|
|
|
|
#ifndef TIMER1_BASE
|
|
if (high_res) {
|
|
hal_cmu_timer0_select_fast();
|
|
}
|
|
#endif
|
|
|
|
run_interval = measure_cpu_freq_interval(cnt);
|
|
|
|
#ifndef TIMER1_BASE
|
|
if (high_res) {
|
|
hal_cmu_timer0_select_slow();
|
|
}
|
|
#endif
|
|
|
|
int_unlock(lock);
|
|
|
|
#ifdef TIMER_USE_FPU
|
|
freq = (uint32_t)((float)ref_freq / run_interval * base_interval);
|
|
#else
|
|
freq = (uint32_t)((uint64_t)ref_freq * base_interval / run_interval);
|
|
#endif
|
|
|
|
if (high_res == 0) {
|
|
freq = (freq + 500000) / 1000000 * 1000000;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
#ifdef CALIB_SLOW_TIMER
|
|
void hal_sys_timer_calib_start(void)
|
|
{
|
|
uint32_t lock;
|
|
uint32_t slow;
|
|
uint32_t fast;
|
|
|
|
lock = int_lock();
|
|
slow = hal_sys_timer_get();
|
|
while (hal_sys_timer_get() == slow);
|
|
fast = hal_fast_sys_timer_get();
|
|
int_unlock(lock);
|
|
|
|
slow_val = slow + 1;
|
|
fast_val = fast;
|
|
}
|
|
|
|
int hal_sys_timer_calib_end(void)
|
|
{
|
|
uint32_t lock;
|
|
uint32_t slow;
|
|
uint32_t fast;
|
|
uint32_t slow_diff;
|
|
|
|
lock = int_lock();
|
|
slow = hal_sys_timer_get();
|
|
while (hal_sys_timer_get() == slow);
|
|
fast = hal_fast_sys_timer_get();
|
|
int_unlock(lock);
|
|
|
|
slow += 1;
|
|
slow_diff = slow - slow_val;
|
|
|
|
// Avoid computation error
|
|
if (slow_diff < MIN_CALIB_TICKS) {
|
|
return 1;
|
|
}
|
|
// Avoid fast tick overflow
|
|
if (slow_diff > MAX_CALIB_TICKS) {
|
|
return 2;
|
|
}
|
|
|
|
#ifdef TIMER_USE_FPU
|
|
sys_tick_hz = (uint32_t)((float)CONFIG_FAST_SYSTICK_HZ / (fast - fast_val) * slow_diff);
|
|
#else
|
|
uint64_t mul;
|
|
|
|
mul = (uint64_t)CONFIG_FAST_SYSTICK_HZ * slow_diff;
|
|
if ((mul >> 32) == 0) {
|
|
sys_tick_hz = (uint32_t)mul / (fast - fast_val);
|
|
} else {
|
|
sys_tick_hz = mul / (fast - fast_val);
|
|
}
|
|
#endif
|
|
|
|
if (sys_tick_hz > MAX_CALIB_SYSTICK_HZ) {
|
|
sys_tick_hz = MAX_CALIB_SYSTICK_HZ;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void hal_sys_timer_calib(void)
|
|
{
|
|
hal_sys_timer_calib_start();
|
|
hal_sys_timer_delay(MIN_CALIB_TICKS);
|
|
hal_sys_timer_calib_end();
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_systick_hz(void)
|
|
{
|
|
return sys_tick_hz;
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_ms_to_ticks(uint32_t ms)
|
|
{
|
|
if (ms <= (~0UL / MAX_CALIB_SYSTICK_HZ)) {
|
|
return (ms * sys_tick_hz / 1000);
|
|
} else {
|
|
#ifdef TIMER_USE_FPU
|
|
return (uint32_t)((float)ms / 1000 * sys_tick_hz);
|
|
#else
|
|
return ((uint64_t)ms * sys_tick_hz / 1000);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_us_to_ticks(uint32_t us)
|
|
{
|
|
if (us <= (~0UL / MAX_CALIB_SYSTICK_HZ)) {
|
|
return ((us * sys_tick_hz / 1000 + 1000 - 1) / 1000 + 1);
|
|
} else {
|
|
#ifdef TIMER_USE_FPU
|
|
return (uint32_t)((float)us / (1000 * 1000) * sys_tick_hz + 1 + 1);
|
|
#else
|
|
return (((uint64_t)us * sys_tick_hz / 1000 + 1000 - 1) / 1000 + 1);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_ticks_to_ms(uint32_t tick)
|
|
{
|
|
if (tick <= (~0UL / 1000)) {
|
|
return tick * 1000 / CONFIG_SYSTICK_HZ;
|
|
} else {
|
|
#ifdef TIMER_USE_FPU
|
|
return (uint32_t)((float)tick / CONFIG_SYSTICK_HZ * 1000);
|
|
#else
|
|
return (uint64_t)tick * 1000 / CONFIG_SYSTICK_HZ;
|
|
#endif
|
|
}
|
|
}
|
|
|
|
uint32_t BOOT_TEXT_SRAM_LOC hal_sys_timer_ticks_to_us(uint32_t tick)
|
|
{
|
|
if (tick <= (~0UL / (1000 * 1000))) {
|
|
return tick * (1000 * 1000) / CONFIG_SYSTICK_HZ;
|
|
} else {
|
|
#ifdef TIMER_USE_FPU
|
|
return (uint32_t)((float)tick / CONFIG_SYSTICK_HZ * (1000 * 1000));
|
|
#else
|
|
return (uint64_t)tick * (1000 * 1000) / CONFIG_SYSTICK_HZ;
|
|
#endif
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifndef RTOS
|
|
int osDelay(uint32_t ms)
|
|
{
|
|
hal_sys_timer_delay(MS_TO_TICKS(ms));
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void hal_timer00_irq_handler(void)
|
|
{
|
|
clear_timer_irq(&dual_timer0->timer[0]);
|
|
dual_timer0->timer[0].Control &= ~TIMER_CTRL_INTEN;
|
|
}
|
|
|
|
void hal_timer_setup(enum HAL_TIMER_TYPE_T type, HAL_TIMER_IRQ_HANDLER_T handler)
|
|
{
|
|
uint32_t mode;
|
|
|
|
if (type == HAL_TIMER_TYPE_ONESHOT) {
|
|
mode = TIMER_CTRL_ONESHOT;
|
|
} else if (type == HAL_TIMER_TYPE_PERIODIC) {
|
|
mode = TIMER_CTRL_MODE_PERIODIC;
|
|
} else {
|
|
mode = 0;
|
|
}
|
|
|
|
irq_handler = handler;
|
|
|
|
clear_timer_irq(&dual_timer0->timer[1]);
|
|
#ifdef ELAPSED_TIMER_ENABLED
|
|
dual_timer0->elapsed_timer[1].ElapsedCtrl = TIMER_ELAPSED_CTRL_CLR;
|
|
#endif
|
|
|
|
if (handler) {
|
|
NVIC_SetVector(TIMER01_IRQn, (uint32_t)hal_timer01_irq_handler);
|
|
NVIC_SetPriority(TIMER01_IRQn, IRQ_PRIORITY_NORMAL);
|
|
NVIC_ClearPendingIRQ(TIMER01_IRQn);
|
|
NVIC_EnableIRQ(TIMER01_IRQn);
|
|
}
|
|
|
|
dual_timer0->timer[1].Control = mode |
|
|
(handler ? TIMER_CTRL_INTEN : 0) |
|
|
TIMER_CTRL_PRESCALE_DIV_1 |
|
|
TIMER_CTRL_SIZE_32_BIT;
|
|
}
|
|
|
|
void hal_timer_start(uint32_t load)
|
|
{
|
|
start_time = hal_sys_timer_get();
|
|
hal_timer_reload(load);
|
|
hal_timer_continue();
|
|
}
|
|
|
|
void hal_timer_stop(void)
|
|
{
|
|
dual_timer0->timer[1].Control &= ~TIMER_CTRL_EN;
|
|
#ifdef ELAPSED_TIMER_ENABLED
|
|
dual_timer0->elapsed_timer[1].ElapsedCtrl = TIMER_ELAPSED_CTRL_CLR;
|
|
#endif
|
|
clear_timer_irq(&dual_timer0->timer[1]);
|
|
NVIC_ClearPendingIRQ(TIMER01_IRQn);
|
|
}
|
|
|
|
void hal_timer_continue(void)
|
|
{
|
|
#ifdef ELAPSED_TIMER_ENABLED
|
|
dual_timer0->elapsed_timer[1].ElapsedCtrl = TIMER_ELAPSED_CTRL_EN | TIMER_ELAPSED_CTRL_CLR;
|
|
#endif
|
|
dual_timer0->timer[1].Control |= TIMER_CTRL_EN;
|
|
}
|
|
|
|
int hal_timer_is_enabled(void)
|
|
{
|
|
return !!(dual_timer0->timer[1].Control & TIMER_CTRL_EN);
|
|
}
|
|
|
|
void hal_timer_reload(uint32_t load)
|
|
{
|
|
if (load > HAL_TIMER_LOAD_DELTA) {
|
|
//load_value = load;
|
|
load -= HAL_TIMER_LOAD_DELTA;
|
|
} else {
|
|
//load_value = HAL_TIMER_LOAD_DELTA + 1;
|
|
load = 1;
|
|
}
|
|
set_timer_load(&dual_timer0->timer[1], load, SLOW_TIMER_VAL_DELTA);
|
|
}
|
|
|
|
uint32_t hal_timer_get(void)
|
|
{
|
|
return get_timer_value(&dual_timer0->timer[1], SLOW_TIMER_VAL_DELTA);
|
|
}
|
|
|
|
int hal_timer_irq_active(void)
|
|
{
|
|
return NVIC_GetActive(TIMER01_IRQn);
|
|
}
|
|
|
|
int hal_timer_irq_pending(void)
|
|
{
|
|
// Or NVIC_GetPendingIRQ(TIMER2_IRQn) ?
|
|
return (dual_timer0->timer[1].MIS & TIMER_MIS_MIS);
|
|
}
|
|
|
|
uint32_t hal_timer_get_overrun_time(void)
|
|
{
|
|
#ifdef ELAPSED_TIMER_ENABLED
|
|
uint32_t extra;
|
|
|
|
if (dual_timer0->elapsed_timer[1].ElapsedCtrl & TIMER_ELAPSED_CTRL_EN) {
|
|
extra = dual_timer0->elapsed_timer[1].ElapsedVal;
|
|
} else {
|
|
extra = 0;
|
|
}
|
|
|
|
return extra;
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
uint32_t hal_timer_get_elapsed_time(void)
|
|
{
|
|
//return load_value + hal_timer_get_overrun_time();
|
|
return hal_sys_timer_get() - start_time;
|
|
}
|
|
|
|
static void hal_timer01_irq_handler(void)
|
|
{
|
|
uint32_t elapsed;
|
|
|
|
clear_timer_irq(&dual_timer0->timer[1]);
|
|
if (irq_handler) {
|
|
elapsed = hal_timer_get_elapsed_time();
|
|
irq_handler(elapsed);
|
|
} else {
|
|
dual_timer0->timer[1].Control &= ~TIMER_CTRL_INTEN;
|
|
}
|
|
}
|
|
|
|
uint32_t hal_timer_get_passed_ticks(uint32_t curr_ticks, uint32_t prev_ticks)
|
|
{
|
|
if(curr_ticks < prev_ticks)
|
|
return ((0xffffffff - prev_ticks + 1) + curr_ticks);
|
|
else
|
|
return (curr_ticks - prev_ticks);
|
|
}
|
|
|