533 lines
15 KiB
C
533 lines
15 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright 2015-2019 BES.
|
|
* All rights reserved. All unpublished rights reserved.
|
|
*
|
|
* No part of this work may be used or reproduced in any form or by any
|
|
* means, or stored in a database or retrieval system, without prior written
|
|
* permission of BES.
|
|
*
|
|
* Use of this work is governed by a license granted by BES.
|
|
* This work contains confidential and proprietary information of
|
|
* BES. which is protected by copyright, trade secret,
|
|
* trademark and other intellectual property rights.
|
|
*
|
|
****************************************************************************/
|
|
#if defined(CHIP_HAS_PSRAM) && (CHIP_PSRAM_CTRL_VER == 1)
|
|
|
|
#include "plat_types.h"
|
|
#include "plat_addr_map.h"
|
|
#include "hal_cmu.h"
|
|
#include "hal_location.h"
|
|
#include "hal_psram.h"
|
|
#include "hal_psramip_v1.h"
|
|
#include "hal_timer.h"
|
|
#include "hal_trace.h"
|
|
#include "hal_uart.h"
|
|
#include "pmu.h"
|
|
#define PSRAM_CALIB 0
|
|
|
|
#define HAL_PSRAM_YES 1
|
|
#define HAL_PSRAM_NO 0
|
|
|
|
#define HAL_PSRAM_CMD_REG_READ 0x40
|
|
#define HAL_PSRAM_CMD_REG_WRITE 0xc0
|
|
#define HAL_PSRAM_CMD_RAM_READ 0x00
|
|
#define HAL_PSRAM_CMD_RAM_WRITE 0x80
|
|
|
|
enum HAL_PSRAM_SPEED {
|
|
HAL_PSRAM_SPEED_13M = 13000000,
|
|
HAL_PSRAM_SPEED_26M = 26000000,
|
|
HAL_PSRAM_SPEED_50M = 50000000,
|
|
HAL_PSRAM_SPEED_52M = 52000000,
|
|
HAL_PSRAM_SPEED_78M = 78000000,
|
|
HAL_PSRAM_SPEED_104M = 104000000,
|
|
HAL_PSRAM_SPEED_130M = 130000000,
|
|
HAL_PSRAM_SPEED_156M = 156000000,
|
|
HAL_PSRAM_SPEED_182M = 182000000,
|
|
HAL_PSRAM_SPEED_208M = 208000000,
|
|
HAL_PSRAM_SPEED_234M = 234000000,
|
|
};
|
|
|
|
struct HAL_PSRAM_CONFIG_T {
|
|
uint32_t source_clk;
|
|
uint32_t speed;
|
|
uint32_t dqs_rd_sel;
|
|
uint32_t dqs_wr_sel;
|
|
|
|
/* internal use : can be config if need to (useful for rom) */
|
|
uint8_t override_config:1;
|
|
uint8_t div;
|
|
};
|
|
|
|
#define PSRAM_DEVICE_ID_LEN_MAX 8
|
|
struct HAL_Psram_Context {
|
|
uint8_t device_id[PSRAM_DEVICE_ID_LEN_MAX];
|
|
uint32_t total_size;
|
|
uint32_t read_size;
|
|
uint32_t write_size;
|
|
};
|
|
|
|
/* hal api */
|
|
#if 0
|
|
uint8_t hal_psram_open(enum HAL_PSRAM_ID_T id, struct HAL_PSRAM_CONFIG_T *cfg);
|
|
uint8_t hal_psram_close(enum HAL_PSRAM_ID_T id);
|
|
void hal_psram_reg_dump(enum HAL_PSRAM_ID_T id);
|
|
#endif
|
|
void hal_psram_suspend(enum HAL_PSRAM_ID_T id);
|
|
void hal_psram_resume(enum HAL_PSRAM_ID_T id);
|
|
void hal_psram_wakeup_init(void);
|
|
|
|
struct HAL_Psram_Context psram_ctx[HAL_PSRAM_ID_NUM];
|
|
|
|
//static const char * const invalid_drv = "psram drv invalid";
|
|
|
|
#define DIGITAL_REG(a) *(volatile uint32_t *)(a)
|
|
|
|
FLASH_TEXT_LOC static uint32_t _psram_get_reg_base(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
switch(id) {
|
|
case HAL_PSRAM_ID_0:
|
|
default:
|
|
return PSRAM_CTRL_BASE;
|
|
break;
|
|
}
|
|
}
|
|
|
|
FLASH_TEXT_LOC static void _psram_exitsleep_onprocess_wait(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
uint32_t reg_base = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
while (psramip_r_exit_sleep_onprocess(reg_base));
|
|
|
|
while (!psramip_r_sleep_wakeup_state(reg_base));
|
|
}
|
|
FLASH_TEXT_LOC static void _psram_busy_wait(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
uint32_t reg_base = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
while (psramip_r_busy(reg_base));
|
|
}
|
|
#if 0
|
|
static void _psram_div(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
/* TODO */
|
|
}
|
|
/* hal api */
|
|
uint8_t hal_psram_open(enum HAL_PSRAM_ID_T id, struct HAL_PSRAM_CONFIG_T *cfg)
|
|
{
|
|
uint32_t div = 0, reg_base = 0;
|
|
//uint32_t psram_id = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
|
|
/* over write config */
|
|
if (cfg->override_config) {
|
|
/* div */
|
|
_psram_div(cfg->div);
|
|
}
|
|
else {
|
|
div = cfg->source_clk/cfg->speed;
|
|
_psram_div(div);
|
|
}
|
|
|
|
/* 0. dqs config */
|
|
psramip_w_dqs_rd_sel(reg_base, cfg->dqs_rd_sel);
|
|
psramip_w_dqs_wr_sel(reg_base, cfg->dqs_wr_sel);
|
|
|
|
/* 1. high speed mode */
|
|
if (cfg->speed >= HAL_PSRAM_SPEED_50M)
|
|
psramip_w_high_speed_enable(reg_base, HAL_PSRAM_YES);
|
|
else
|
|
psramip_w_high_speed_enable(reg_base, HAL_PSRAM_NO);
|
|
|
|
_psram_busy_wait(id);
|
|
|
|
/* 2. wait calib done or FIXME timeout */
|
|
psramip_w_enable_and_trigger_calib(reg_base);
|
|
while (!psramip_r_calibst(reg_base));
|
|
|
|
psramip_w_wrap_mode_enable(reg_base, HAL_PSRAM_YES);
|
|
//psramip_w_wrap_mode_enable(reg_base, HAL_PSRAM_NO);
|
|
|
|
//psramip_w_32bytewrap_mode(reg_base);
|
|
psramip_w_1kwrap_mode(reg_base);
|
|
#if 0
|
|
/* psram device register read 1 or 2 or 3 */
|
|
psramip_w_acc_size(reg_base, 1);
|
|
psramip_w_cmd_addr(reg_base, HAL_PSRAM_CMD_REG_READ, 2);
|
|
_psram_busy_wait(id);
|
|
psram_id = psramip_r_rx_fifo(reg_base);
|
|
|
|
uart_printf("psram id 0x%x\n", psram_id);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
uint8_t hal_psram_close(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
return 0;
|
|
}
|
|
void hal_psram_reg_dump(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
uint32_t reg_base = 0;
|
|
uint32_t psram_id = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
|
|
/* psram device register read 1 or 2 or 3 */
|
|
psramip_w_acc_size(reg_base, 1);
|
|
psramip_w_cmd_addr(reg_base, HAL_PSRAM_CMD_REG_READ, 2);
|
|
_psram_busy_wait(id);
|
|
psram_id = psramip_r_rx_fifo(reg_base);
|
|
|
|
uart_printf("psram id 0x%x\n", psram_id);
|
|
}
|
|
|
|
#endif
|
|
|
|
FLASH_TEXT_LOC uint8_t hal_psramip_read_reg(uint8_t reg)
|
|
{
|
|
uint32_t mr;
|
|
psramip_clear_fifo(_psram_get_reg_base(HAL_PSRAM_ID_0));
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_READ, (uint32_t)reg);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
return mr&0xff;
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psramip_write_reg(uint8_t reg, uint8_t val)
|
|
{
|
|
enum HAL_PSRAM_ID_T id = HAL_PSRAM_ID_0;
|
|
psramip_clear_fifo(_psram_get_reg_base(HAL_PSRAM_ID_0));
|
|
psramip_w_tx_fifo(0x40150000, (uint32_t)val);
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_WRITE, (uint32_t)reg);
|
|
_psram_busy_wait(id);
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psram_suspend(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
uint32_t reg_base = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
|
|
psramip_w_acc_size(reg_base, 1);
|
|
hal_psramip_write_reg(0x6, 0xf0);
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psram_resume(enum HAL_PSRAM_ID_T id)
|
|
{
|
|
uint32_t reg_base = 0;
|
|
reg_base = _psram_get_reg_base(id);
|
|
|
|
psramip_w_exit_sleep(reg_base);
|
|
|
|
_psram_exitsleep_onprocess_wait(id);
|
|
}
|
|
//uint32_t test_ctrl =0;
|
|
|
|
#ifdef CHIP_BEST2000
|
|
void pmu_open_bbpll_for_psram();
|
|
/*psram 120M use bbpll(div 4), 160M use bbpll(dir4), 100M use audio pll*/
|
|
FLASH_TEXT_LOC void hal_psram_init(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
uint8_t mr = 0;
|
|
// enum HAL_PSRAM_ID_T id = HAL_PSRAM_ID_0;
|
|
#if defined(PSRAM_120M) || defined(PSRAM_160M)
|
|
pmu_open_bbpll_for_psram();
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_208M);
|
|
#else /*PSRAM_160M*/
|
|
#ifdef MCU_ULTRAHIGH_PERFORMANCE_MODE
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_104M);//104*2
|
|
#else
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_208M);
|
|
#endif
|
|
#endif /*PSRAM_160M*/
|
|
pmu_psram_freq_config(HAL_PSRAM_SPEED_208M);
|
|
#else
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_26M);
|
|
pmu_psram_freq_config(HAL_PSRAM_SPEED_26M);
|
|
#endif
|
|
|
|
hal_cmu_clock_enable(HAL_CMU_MOD_O_PSRAM);
|
|
hal_cmu_clock_enable(HAL_CMU_MOD_H_PSRAM);
|
|
hal_cmu_reset_clear(HAL_CMU_MOD_O_PSRAM);
|
|
hal_cmu_reset_clear(HAL_CMU_MOD_H_PSRAM);
|
|
DIGITAL_REG(0x4008004c) |= 0x1<<21;
|
|
#if 0 //for debug
|
|
DIGITAL_REG(0x40150020) = 0x01;
|
|
DIGITAL_REG(0x400000ac) &= ~(0xc0000);
|
|
|
|
DIGITAL_REG(0x400000ac) |= (0x80000);
|
|
|
|
DIGITAL_REG(0x40087008) = 0xFFFFFFAF;
|
|
DIGITAL_REG(0x4008701c) = 0x2;
|
|
#endif
|
|
|
|
#ifndef PSRAM_LOW_SPEED
|
|
DIGITAL_REG(0x40150040) = 0x44712133;
|
|
|
|
DIGITAL_REG(0x40150044) = 0x200040b1;
|
|
DIGITAL_REG(0x40150044) |= (1<<1)|(1<<30);
|
|
|
|
while (((DIGITAL_REG(0x40150044)) & (0x1<<30)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
DIGITAL_REG(0x40150044) &= ~(1<<0);
|
|
|
|
while (!((DIGITAL_REG(0x40150044)) & (0x1<<0)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
DIGITAL_REG(0x40000090) = 0x0001ffff;
|
|
while (!((DIGITAL_REG(0x40000090)) & (0x1<<20)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
//lp delay
|
|
// DIGITAL_REG(0x4015001C)=0xffffffff;//c
|
|
DIGITAL_REG(0x4015001C)=((4*200)<<0)|
|
|
((70*200)<<16)|
|
|
((70*200/1000)<<10);// 208MHZ: tHS 10us, tXHS 100us, tXPHS 100ns
|
|
//ramp=1k select low speed
|
|
DIGITAL_REG(0x4015002C)=0x0000000d;//c
|
|
//tx/rx Phase
|
|
// #error "6666666666666666"
|
|
//DIGITAL_REG(0x40150024)= 0x55000713;//0x55000373;//223
|
|
//DIGITAL_REG(0x40150024)= 0x55000373;//0x55000373;//223
|
|
#if PSRAM_CALIB
|
|
|
|
DIGITAL_REG(0x40150024)= 0x55000373;//0x55000373;//223
|
|
#else
|
|
#if defined(PSRAM_200M)
|
|
DIGITAL_REG(0x40150024)= 0x55000653;//0x55000373;//223
|
|
#elif defined(PSRAM_160M)
|
|
DIGITAL_REG(0x40150024)= 0x55000463;//;//0x55000373;//223
|
|
#elif defined(PSRAM_120M)
|
|
DIGITAL_REG(0x40150024)= 0x55000113;//0x55000373;//223
|
|
#else /*100M*/
|
|
DIGITAL_REG(0x40150024)= 0x55000113;//0x55000373;//223
|
|
#endif
|
|
#endif
|
|
while (!((DIGITAL_REG(0x40150024)) & (0x1<<3)));
|
|
#if 1
|
|
//reset psram chip
|
|
psramip_write32(0xff, 0x40150000, 0x00);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
//clear fifo
|
|
psramip_write32(0x03, 0x40150000, 0x18);
|
|
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
hal_sys_timer_delay(US_TO_TICKS(10));
|
|
// test_ctrl = 1;
|
|
// while (test_ctrl ==1);
|
|
|
|
mr = hal_psramip_read_reg(0x0);
|
|
mr &= ~(0x3 << 6); // MR[7:6] must set 0
|
|
mr &= ~(0x1 << 5); //MR0[5] = 0, latency type 0->variable
|
|
mr &= ~(0x7 << 2);
|
|
mr |= (0x6 << 2); //MR0[4:2] = '110 Latency =6 for 200M (variable latency)
|
|
mr &= ~(0x3 << 0);
|
|
mr |= (0x1 << 0); //driver strength '01 -> half
|
|
hal_psramip_write_reg(0x0, mr);
|
|
mr = hal_psramip_read_reg(0x0);
|
|
//TRACE(2,"PSRAM MODE REG 0 = 0x%x, status = 0x%x", mr, psramip_r_status(0x40150000));
|
|
|
|
mr = hal_psramip_read_reg(0x4);
|
|
mr &= ~(0x01 << 7);
|
|
mr |= (0x01 << 7); // MR[7] '1 -> write latency 1 for clk > 166MHz
|
|
//hal_psramip_write_reg(0x4, mr);
|
|
mr = hal_psramip_read_reg(0x4);
|
|
//TRACE(2,"PSRAM MODE REG 4 = 0x%x, status = 0x%x", mr, psramip_r_status(0x40150000));
|
|
|
|
#endif
|
|
hal_sys_timer_delay(US_TO_TICKS(10));
|
|
#else /*PSRAM_LOW_SPEED*/
|
|
// open psram phy power
|
|
DIGITAL_REG(0x4008004c) |= (1 << 21);
|
|
//init psram
|
|
//lp delay
|
|
DIGITAL_REG(0x4015001C)=0x3fff3cff;//c
|
|
//ramp=1k select low speed
|
|
DIGITAL_REG(0x4015002C)=0x0000000c;
|
|
//tx/rx Phase
|
|
DIGITAL_REG(0x40150024)=0x55000223;
|
|
#endif /*PSRAM_LOW_SPEED*/
|
|
|
|
psramip_w_acc_size(_psram_get_reg_base(HAL_PSRAM_ID_0), 1);
|
|
#ifdef PSRAM_200M
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_208M);
|
|
#endif
|
|
}
|
|
FLASH_TEXT_LOC void hal_psram_wakeup_init(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
DIGITAL_REG(0x40150040) = 0x44712133;
|
|
|
|
DIGITAL_REG(0x40150044) = 0x200040b1;
|
|
DIGITAL_REG(0x40150044) |= (1<<1)|(1<<30);
|
|
|
|
//TRACE(1,"0x40150044 = 0x%x \n",DIGITAL_REG(0x40150044));
|
|
while (((DIGITAL_REG(0x40150044)) & (0x1<<30)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
DIGITAL_REG(0x40150044) &= ~(1<<0);
|
|
|
|
//TRACE(1,"0x40150044 = 0x%x \n", DIGITAL_REG(0x40150044));
|
|
while (!((DIGITAL_REG(0x40150044)) & (0x1<<0)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
DIGITAL_REG(0x40000090) = 0x0001ffff;
|
|
//TRACE(1,"0x40000090 = 0x%x \n", DIGITAL_REG(0x40000090));
|
|
while (!((DIGITAL_REG(0x40000090)) & (0x1<<20)));
|
|
//hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
#endif
|
|
|
|
hal_psram_resume(HAL_PSRAM_ID_0);
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psram_sleep(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
hal_psram_suspend(HAL_PSRAM_ID_0);
|
|
/* dll power off */
|
|
DIGITAL_REG(0x40150044) &= ~(1 << 1);
|
|
/* phy power off */
|
|
/* DIGITAL_REG(0x4008004c) &= ~(1 << 21) */
|
|
#endif
|
|
}
|
|
|
|
#else
|
|
|
|
FLASH_TEXT_LOC void hal_psram_init(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
unsigned int mr = 0;
|
|
enum HAL_PSRAM_ID_T id = HAL_PSRAM_ID_0;
|
|
#endif
|
|
hal_cmu_mem_set_freq(HAL_CMU_FREQ_208M);
|
|
|
|
hal_cmu_clock_enable(HAL_CMU_MOD_O_PSRAM);
|
|
hal_cmu_clock_enable(HAL_CMU_MOD_H_PSRAM);
|
|
hal_cmu_reset_clear(HAL_CMU_MOD_O_PSRAM);
|
|
hal_cmu_reset_clear(HAL_CMU_MOD_H_PSRAM);
|
|
|
|
|
|
#ifndef PSRAM_LOW_SPEED
|
|
DIGITAL_REG(0x4001f038) = 0x77783533;
|
|
|
|
DIGITAL_REG(0x4001f03c) = 0x3ffffff4;
|
|
DIGITAL_REG(0x4001f03c) |= (1<<1)|(1<<30);
|
|
while (((DIGITAL_REG(0x4001f03c)) & (0x1<<30)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
DIGITAL_REG(0x4001f03c) &= ~(1<<0);
|
|
while (!((DIGITAL_REG(0x4001f03c)) & (0x1<<0)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
DIGITAL_REG(0x40000090) = 0x0001ffff;
|
|
while (!((DIGITAL_REG(0x40000090)) & (0x1<<20)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
//lp delay
|
|
DIGITAL_REG(0x4015001C)=0xffffffff;//c
|
|
//ramp=1k select low speed
|
|
DIGITAL_REG(0x4015002C)=0x0000000d;//c
|
|
//tx/rx Phase
|
|
DIGITAL_REG(0x40150024)=0x55000563;//223
|
|
while (!((DIGITAL_REG(0x40150024)) & (0x1<<3)));
|
|
#if 1
|
|
//reset psram chip
|
|
psramip_write32(0xff, 0x40150000, 0x00);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
//clear fifo
|
|
psramip_write32(0x03, 0x40150000, 0x18);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
//read MR0
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_READ, 0);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
//need read twice
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
// hal_uart_printf("count=0x%x mr0 = 0x%x \n", psramip_r_status(0x40150000), mr);
|
|
|
|
mr &= 0xff;
|
|
mr &= ~(0x03 << 6); // MR[7:6] must set 0
|
|
// driver strength 00:1/16 01:1/2 10:1/4 11:1/8 MR0[1:0]
|
|
mr &= ~0x03;
|
|
mr |= 0x01;
|
|
//for >> 200M MR0[4:2]
|
|
mr &= ~(0x07 << 2);
|
|
mr |= (0x06 << 2);
|
|
psramip_w_tx_fifo(0x40150000, mr);
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_WRITE, 0);
|
|
_psram_busy_wait(id);
|
|
|
|
//read MR0 again
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_READ, 0);
|
|
while((psramip_r_status(0x40150000)& PSRAM_STAT_BUSY));
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
// hal_uart_printf("count=0x%x mr0 = 0x%x \n", psramip_r_status(0x40150000), mr);
|
|
//read MR4
|
|
psramip_w_cmd_addr(0x40150000, HAL_PSRAM_CMD_REG_READ, 4);
|
|
_psram_busy_wait(id);
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
mr = psramip_r_rx_fifo(0x40150000);
|
|
// hal_uart_printf("mr4 = 0x%x\n", mr);
|
|
|
|
_psram_busy_wait(id);
|
|
#endif
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
#else
|
|
// open psram phy power
|
|
DIGITAL_REG(0x4001f02c) |= (1 << 16);
|
|
//init psram
|
|
//lp delay
|
|
DIGITAL_REG(0x4015001C)=0x3fff3cff;//c
|
|
//ramp=1k select low speed
|
|
DIGITAL_REG(0x4015002C)=0x0000000c;
|
|
//tx/rx Phase
|
|
DIGITAL_REG(0x40150024)=0x55000223;
|
|
#endif
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psram_wakeup_init(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
// dll
|
|
DIGITAL_REG(0x4001f038) = 0x77783533;
|
|
|
|
DIGITAL_REG(0x4001f03c) = 0x3ffffff4;
|
|
DIGITAL_REG(0x4001f03c) |= (1<<1)|(1<<30);
|
|
while (((DIGITAL_REG(0x4001f03c)) & (0x1<<30)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
DIGITAL_REG(0x4001f03c) &= ~(1<<0);
|
|
while (!((DIGITAL_REG(0x4001f03c)) & (0x1<<0)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
|
|
DIGITAL_REG(0x40000090) = 0x0001ffff;
|
|
while (!((DIGITAL_REG(0x40000090)) & (0x1<<20)));
|
|
hal_sys_timer_delay(MS_TO_TICKS(10));
|
|
#endif
|
|
|
|
hal_psram_resume(HAL_PSRAM_ID_0);
|
|
}
|
|
|
|
FLASH_TEXT_LOC void hal_psram_sleep(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
hal_psram_suspend(HAL_PSRAM_ID_0);
|
|
/* dll power off */
|
|
DIGITAL_REG(0x4001f03c) &= ~(1 << 1);
|
|
/* phy power off */
|
|
/* DIGITAL_REG(0x4001f02c) &= ~(1 << 16) */
|
|
#endif
|
|
}
|
|
|
|
#endif
|
|
|
|
FLASH_TEXT_LOC void hal_psram_wakeup(void)
|
|
{
|
|
#ifndef PSRAM_LOW_SPEED
|
|
hal_psram_wakeup_init();
|
|
#endif
|
|
}
|
|
|
|
#endif
|