pinebuds/rtos/rtx5/IAR/irq_armv8mbl_common.s

300 lines
13 KiB
ArmAsm

;/*
; * Copyright (c) 2016-2018 Arm Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; *
; * -----------------------------------------------------------------------------
; *
; * Project: CMSIS-RTOS RTX
; * Title: ARMv8M Baseline Exception handlers
; *
; * -----------------------------------------------------------------------------
; */
#ifndef DOMAIN_NS
#define DOMAIN_NS 0
#endif
I_T_RUN_OFS EQU 20 ; osRtxInfo.thread.run offset
TCB_SM_OFS EQU 48 ; TCB.stack_mem offset
TCB_SP_OFS EQU 56 ; TCB.SP offset
TCB_SF_OFS EQU 34 ; TCB.stack_frame offset
TCB_TZM_OFS EQU 64 ; TCB.tz_memory offset
PRESERVE8
SECTION .rodata:DATA:NOROOT(2)
EXPORT irqRtxLib
irqRtxLib DCB 0 ; Non weak library reference
SECTION .text:CODE:NOROOT(2)
THUMB
SVC_Handler
EXPORT SVC_Handler
IMPORT osRtxUserSVC
IMPORT osRtxInfo
#if (DOMAIN_NS == 1)
IMPORT TZ_LoadContext_S
IMPORT TZ_StoreContext_S
#endif
MOV R0,LR
LSRS R0,R0,#3 ; Determine return stack from EXC_RETURN bit 2
BCC SVC_MSP ; Branch if return stack is MSP
MRS R0,PSP ; Get PSP
SVC_Number
LDR R1,[R0,#24] ; Load saved PC from stack
SUBS R1,R1,#2 ; Point to SVC instruction
LDRB R1,[R1] ; Load SVC number
CMP R1,#0
BNE SVC_User ; Branch if not SVC 0
PUSH {R0,LR} ; Save SP and EXC_RETURN
LDM R0,{R0-R3} ; Load function parameters from stack
BLX R7 ; Call service function
POP {R2,R3} ; Restore SP and EXC_RETURN
STMIA R2!,{R0-R1} ; Store function return values
MOV LR,R3 ; Set EXC_RETURN
SVC_Context
LDR R3,=osRtxInfo+I_T_RUN_OFS; Load address of osRtxInfo.run
LDMIA R3!,{R1,R2} ; Load osRtxInfo.thread.run: curr & next
CMP R1,R2 ; Check if thread switch is required
BEQ SVC_Exit ; Branch when threads are the same
CBZ R1,SVC_ContextSwitch ; Branch if running thread is deleted
SVC_ContextSave
#if (DOMAIN_NS == 1)
LDR R0,[R1,#TCB_TZM_OFS] ; Load TrustZone memory identifier
CBZ R0,SVC_ContextSave1 ; Branch if there is no secure context
PUSH {R1,R2,R3,R7} ; Save registers
MOV R7,LR ; Get EXC_RETURN
BL TZ_StoreContext_S ; Store secure context
MOV LR,R7 ; Set EXC_RETURN
POP {R1,R2,R3,R7} ; Restore registers
#endif
SVC_ContextSave1
MRS R0,PSP ; Get PSP
SUBS R0,R0,#32 ; Calculate SP
STR R0,[R1,#TCB_SP_OFS] ; Store SP
STMIA R0!,{R4-R7} ; Save R4..R7
MOV R4,R8
MOV R5,R9
MOV R6,R10
MOV R7,R11
STMIA R0!,{R4-R7} ; Save R8..R11
SVC_ContextSave2
MOV R0,LR ; Get EXC_RETURN
ADDS R1,R1,#TCB_SF_OFS ; Adjust address
STRB R0,[R1] ; Store stack frame information
SVC_ContextSwitch
SUBS R3,R3,#8 ; Adjust address
STR R2,[R3] ; osRtxInfo.thread.run: curr = next
SVC_ContextRestore
#if (DOMAIN_NS == 1)
LDR R0,[R2,#TCB_TZM_OFS] ; Load TrustZone memory identifier
CBZ R0,SVC_ContextRestore1 ; Branch if there is no secure context
PUSH {R2,R3} ; Save registers
BL TZ_LoadContext_S ; Load secure context
POP {R2,R3} ; Restore registers
#endif
SVC_ContextRestore1
MOV R1,R2
ADDS R1,R1,#TCB_SF_OFS ; Adjust address
LDRB R0,[R1] ; Load stack frame information
MOVS R1,#0xFF
MVNS R1,R1 ; R1=0xFFFFFF00
ORRS R0,R1
MOV LR,R0 ; Set EXC_RETURN
#if (DOMAIN_NS == 1)
LSLS R0,R0,#25 ; Check domain of interrupted thread
BPL SVC_ContextRestore2 ; Branch if non-secure
LDR R0,[R2,#TCB_SP_OFS] ; Load SP
MSR PSP,R0 ; Set PSP
BX LR ; Exit from handler
#else
LDR R0,[R2,#TCB_SM_OFS] ; Load stack memory base
MSR PSPLIM,R0 ; Set PSPLIM
#endif
SVC_ContextRestore2
LDR R0,[R2,#TCB_SP_OFS] ; Load SP
ADDS R0,R0,#16 ; Adjust address
LDMIA R0!,{R4-R7} ; Restore R8..R11
MOV R8,R4
MOV R9,R5
MOV R10,R6
MOV R11,R7
MSR PSP,R0 ; Set PSP
SUBS R0,R0,#32 ; Adjust address
LDMIA R0!,{R4-R7} ; Restore R4..R7
SVC_Exit
BX LR ; Exit from handler
SVC_MSP
MRS R0,MSP ; Get MSP
B SVC_Number
SVC_User
LDR R2,=osRtxUserSVC ; Load address of SVC table
LDR R3,[R2] ; Load SVC maximum number
CMP R1,R3 ; Check SVC number range
BHI SVC_Exit ; Branch if out of range
PUSH {R0,LR} ; Save SP and EXC_RETURN
LSLS R1,R1,#2
LDR R3,[R2,R1] ; Load address of SVC function
MOV R12,R3
LDMIA R0,{R0-R3} ; Load function parameters from stack
BLX R12 ; Call service function
POP {R2,R3} ; Restore SP and EXC_RETURN
STR R0,[R2] ; Store function return value
MOV LR,R3 ; Set EXC_RETURN
BX LR ; Return from handler
PendSV_Handler
EXPORT PendSV_Handler
IMPORT osRtxPendSV_Handler
PUSH {R0,LR} ; Save EXC_RETURN
BL osRtxPendSV_Handler ; Call osRtxPendSV_Handler
POP {R0,R1} ; Restore EXC_RETURN
MOV LR,R1 ; Set EXC_RETURN
B Sys_Context
SysTick_Handler
EXPORT SysTick_Handler
IMPORT osRtxTick_Handler
PUSH {R0,LR} ; Save EXC_RETURN
BL osRtxTick_Handler ; Call osRtxTick_Handler
POP {R0,R1} ; Restore EXC_RETURN
MOV LR,R1 ; Set EXC_RETURN
B Sys_Context
Sys_Context
EXPORT Sys_Context
IMPORT osRtxInfo
#if (DOMAIN_NS == 1)
IMPORT TZ_LoadContext_S
IMPORT TZ_StoreContext_S
#endif
LDR R3,=osRtxInfo+I_T_RUN_OFS; Load address of osRtxInfo.run
LDM R3!,{R1,R2} ; Load osRtxInfo.thread.run: curr & next
CMP R1,R2 ; Check if thread switch is required
BEQ Sys_ContextExit ; Branch when threads are the same
Sys_ContextSave
#if (DOMAIN_NS == 1)
LDR R0,[R1,#TCB_TZM_OFS] ; Load TrustZone memory identifier
CBZ R0,Sys_ContextSave1 ; Branch if there is no secure context
PUSH {R1,R2,R3,R7} ; Save registers
MOV R7,LR ; Get EXC_RETURN
BL TZ_StoreContext_S ; Store secure context
MOV LR,R7 ; Set EXC_RETURN
POP {R1,R2,R3,R7} ; Restore registers
MOV R0,LR ; Get EXC_RETURN
LSLS R0,R0,#25 ; Check domain of interrupted thread
BPL Sys_ContextSave1 ; Branch if non-secure
MRS R0,PSP ; Get PSP
STR R0,[R1,#TCB_SP_OFS] ; Store SP
B Sys_ContextSave2
#endif
Sys_ContextSave1
MRS R0,PSP ; Get PSP
SUBS R0,R0,#32 ; Adjust address
STR R0,[R1,#TCB_SP_OFS] ; Store SP
STMIA R0!,{R4-R7} ; Save R4..R7
MOV R4,R8
MOV R5,R9
MOV R6,R10
MOV R7,R11
STMIA R0!,{R4-R7} ; Save R8..R11
Sys_ContextSave2
MOV R0,LR ; Get EXC_RETURN
ADDS R1,R1,#TCB_SF_OFS ; Adjust address
STRB R0,[R1] ; Store stack frame information
Sys_ContextSwitch
SUBS R3,R3,#8 ; Adjust address
STR R2,[R3] ; osRtxInfo.run: curr = next
Sys_ContextRestore
#if (DOMAIN_NS == 1)
LDR R0,[R2,#TCB_TZM_OFS] ; Load TrustZone memory identifier
CBZ R0,Sys_ContextRestore1 ; Branch if there is no secure context
PUSH {R2,R3} ; Save registers
BL TZ_LoadContext_S ; Load secure context
POP {R2,R3} ; Restore registers
#endif
Sys_ContextRestore1
MOV R1,R2
ADDS R1,R1,#TCB_SF_OFS ; Adjust offset
LDRB R0,[R1] ; Load stack frame information
MOVS R1,#0xFF
MVNS R1,R1 ; R1=0xFFFFFF00
ORRS R0,R1
MOV LR,R0 ; Set EXC_RETURN
#if (DOMAIN_NS == 1)
LSLS R0,R0,#25 ; Check domain of interrupted thread
BPL Sys_ContextRestore2 ; Branch if non-secure
LDR R0,[R2,#TCB_SP_OFS] ; Load SP
MSR PSP,R0 ; Set PSP
BX LR ; Exit from handler
#else
LDR R0,[R2,#TCB_SM_OFS] ; Load stack memory base
MSR PSPLIM,R0 ; Set PSPLIM
#endif
Sys_ContextRestore2
LDR R0,[R2,#TCB_SP_OFS] ; Load SP
ADDS R0,R0,#16 ; Adjust address
LDMIA R0!,{R4-R7} ; Restore R8..R11
MOV R8,R4
MOV R9,R5
MOV R10,R6
MOV R11,R7
MSR PSP,R0 ; Set PSP
SUBS R0,R0,#32 ; Adjust address
LDMIA R0!,{R4-R7} ; Restore R4..R7
Sys_ContextExit
BX LR ; Exit from handler