pinebuds/platform/drivers/norflash/norflash_en25s80b.c
Ben V. Brown 75381150fd Formatting
Formatting Pass 1

Lots of fixups to adding stdint and stdbool all over the place

Formatting Pass 2
Formatting Pass 3
Formatting Pass 4

Update app_bt_stream.cpp
2023-02-02 07:56:49 +11:00

144 lines
3.7 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#include "norflash_en25s80b.h"
#include "hal_norflaship.h"
#include "hal_timer.h"
#include "hal_trace.h"
#include "norflash_drv.h"
#include "plat_types.h"
static void POSSIBLY_UNUSED en25s80b_en25s80b_reset(void) {
// ip quad mode
norflaship_quad_mode(1);
norflaship_busy_wait();
hal_sys_timer_delay(20);
// quad reset enable
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_QUAD_RESET_ENABLE, 0);
norflaship_busy_wait();
hal_sys_timer_delay(20);
// quad reset
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_QUAD_RESET, 0);
norflaship_busy_wait();
hal_sys_timer_delay(20);
// ip spi mode
norflaship_quad_mode(0);
norflaship_hold_pin(0);
norflaship_wpr_pin(0);
norflaship_busy_wait();
hal_sys_timer_delay(20);
// reset enable
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_SPI_RESET_ENABLE, 0);
norflaship_busy_wait();
hal_sys_timer_delay(20);
// reset
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_SPI_RESET, 0);
norflaship_busy_wait();
hal_sys_timer_delay(20);
}
static void en25s80b_enter_OTP(void) {
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_ENTER_OTP, 0);
norflash_status_WIP_1_wait(0);
}
static void en25s80b_exit_OTP(void) {
norflaship_clear_txfifo();
norflaship_cmd_addr(EN25S80B_CMD_EXIT_OTP, 0);
norflash_status_WIP_1_wait(0);
}
static void en25s80b_write_status_s0_s7(uint8_t status) {
norflash_write_reg(EN25S80B_CMD_WRITE_STATUS, &status, 1);
}
static int en25s80b_write_status(enum DRV_NORFLASH_W_STATUS_T type,
uint32_t param) {
uint8_t status;
if (type == DRV_NORFLASH_W_STATUS_QE) {
en25s80b_enter_OTP();
status = norflash_read_status_s0_s7();
if (param) {
status |= (EN25S80B_WHDIS_BIT_MASK);
} else {
status &= ~(EN25S80B_WHDIS_BIT_MASK);
}
en25s80b_write_status_s0_s7(status);
en25s80b_exit_OTP();
return 0;
}
return 1;
}
const struct NORFLASH_CFG_T en25s80b_cfg = {
.id =
{
0x1C,
0x38,
0x14,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_6_EIGHTH,
},
},
.crm_en_bits = 0xA5,
.crm_dis_bits = 0xAA,
.sec_reg_cfg =
{
.s =
{
.enabled = false,
},
},
.page_size = EN25S80B_PAGE_SIZE,
.sector_size = EN25S80B_SECTOR_SIZE,
.block_size = EN25S80B_BLOCK_SIZE,
.total_size = EN25S80B_TOTAL_SIZE,
.max_speed = 104 * 1000 * 1000,
.mode = (HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_ERASE_IN_STD),
.write_status = en25s80b_write_status,
};