pinebuds/config/best2300p_ibrt/tgt_hardware.c

354 lines
13 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#include "tgt_hardware.h"
#include "drc.h"
#include "fir_process.h"
#include "iir_process.h"
#include "limiter.h"
#include "spectrum_fix.h"
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_hw_pinmux_pwl[CFG_HW_PLW_NUM] = {
#if (CFG_HW_PLW_NUM > 0)
{HAL_IOMUX_PIN_LED2, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE},
{HAL_IOMUX_PIN_LED1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE},
#endif
};
#ifdef __APP_USE_LED_INDICATE_IBRT_STATUS__
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_ibrt_indication_pinmux_pwl[3] = {
{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE},
{HAL_IOMUX_PIN_LED1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VBAT,
HAL_IOMUX_PIN_PULLUP_ENABLE},
{HAL_IOMUX_PIN_LED2, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VBAT,
HAL_IOMUX_PIN_PULLUP_ENABLE},
};
#endif
#ifdef __KNOWLES
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_pinmux_uart[2] = {
{HAL_IOMUX_PIN_P2_2, HAL_IOMUX_FUNC_UART2_RX, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_NOPULL},
{HAL_IOMUX_PIN_P2_3, HAL_IOMUX_FUNC_UART2_TX, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_NOPULL},
};
#endif
// adckey define
const uint16_t CFG_HW_ADCKEY_MAP_TABLE[CFG_HW_ADCKEY_NUMBER] = {
#if (CFG_HW_ADCKEY_NUMBER > 0)
HAL_KEY_CODE_FN9, HAL_KEY_CODE_FN8, HAL_KEY_CODE_FN7,
HAL_KEY_CODE_FN6, HAL_KEY_CODE_FN5, HAL_KEY_CODE_FN4,
HAL_KEY_CODE_FN3, HAL_KEY_CODE_FN2, HAL_KEY_CODE_FN1,
#endif
};
// gpiokey define
#define CFG_HW_GPIOKEY_DOWN_LEVEL (0)
#define CFG_HW_GPIOKEY_UP_LEVEL (1)
const struct HAL_KEY_GPIOKEY_CFG_T cfg_hw_gpio_key_cfg[CFG_HW_GPIOKEY_NUM] = {
/*
#if (CFG_HW_GPIOKEY_NUM > 0)
#ifdef BES_AUDIO_DEV_Main_Board_9v0
{HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P0_3, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
{HAL_KEY_CODE_FN2,{HAL_IOMUX_PIN_P0_0, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
{HAL_KEY_CODE_FN3,{HAL_IOMUX_PIN_P0_1, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
{HAL_KEY_CODE_FN4,{HAL_IOMUX_PIN_P0_2, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
//{HAL_KEY_CODE_FN5,{HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
// {HAL_KEY_CODE_FN6,{HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #else #ifndef
TPORTS_KEY_COEXIST {HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_3,
HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE}}, {HAL_KEY_CODE_FN2,{HAL_IOMUX_PIN_P1_0,
HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE}},
// {HAL_KEY_CODE_FN3,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
{HAL_KEY_CODE_FN15,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #else
{HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_3, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
{HAL_KEY_CODE_FN15,{HAL_IOMUX_PIN_P1_0, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #endif #endif
#ifdef IS_MULTI_AI_ENABLED
//{HAL_KEY_CODE_FN13,{HAL_IOMUX_PIN_P1_3, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
//{HAL_KEY_CODE_FN14,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #endif #endif
*/
{HAL_KEY_CODE_FN1,
{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE}},
};
// bt config
const char *BT_LOCAL_NAME = TO_STRING(BT_DEV_NAME) "\0";
const char *BLE_DEFAULT_NAME = "BES_BLE";
uint8_t ble_addr[6] = {
#ifdef BLE_DEV_ADDR
BLE_DEV_ADDR
#else
0xBE, 0x99, 0x34, 0x45,
0x56, 0x67
#endif
};
uint8_t bt_addr[6] = {
#ifdef BT_DEV_ADDR
BT_DEV_ADDR
#else
0x1e, 0x57, 0x34, 0x45,
0x56, 0x67
#endif
};
// audio config
// freq bands range {[0k:2.5K], [2.5k:5K], [5k:7.5K], [7.5K:10K], [10K:12.5K],
// [12.5K:15K], [15K:17.5K], [17.5K:20K]} gain range -12~+12
const int8_t cfg_aud_eq_sbc_band_settings[CFG_HW_AUD_EQ_NUM_BANDS] = {
0, 0, 0, 0, 0, 0, 0, 0};
#define TX_PA_GAIN CODEC_TX_PA_GAIN_DEFAULT
const struct CODEC_DAC_VOL_T codec_dac_vol[TGT_VOLUME_LEVEL_QTY] = {
{TX_PA_GAIN, 0x03, -21}, {TX_PA_GAIN, 0x03, -99},
{TX_PA_GAIN, 0x03, -45}, {TX_PA_GAIN, 0x03, -42},
{TX_PA_GAIN, 0x03, -39}, {TX_PA_GAIN, 0x03, -36},
{TX_PA_GAIN, 0x03, -33}, {TX_PA_GAIN, 0x03, -30},
{TX_PA_GAIN, 0x03, -27}, {TX_PA_GAIN, 0x03, -24},
{TX_PA_GAIN, 0x03, -21}, {TX_PA_GAIN, 0x03, -18},
{TX_PA_GAIN, 0x03, -15}, {TX_PA_GAIN, 0x03, -12},
{TX_PA_GAIN, 0x03, -9}, {TX_PA_GAIN, 0x03, -6},
{TX_PA_GAIN, 0x03, -3}, {TX_PA_GAIN, 0x03, 0}, // 0dBm
};
#if SPEECH_CODEC_CAPTURE_CHANNEL_NUM == 2
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC2 | \
AUD_VMIC_MAP_VMIC3)
#elif SPEECH_CODEC_CAPTURE_CHANNEL_NUM == 3
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH1 | AUD_CHANNEL_MAP_CH4 | \
AUD_VMIC_MAP_VMIC1)
#else
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
(AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC3)
#endif
#define CFG_HW_AUD_INPUT_PATH_LINEIN_DEV \
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH1)
#ifdef VOICE_DETECTOR_EN
#define CFG_HW_AUD_INPUT_PATH_VADMIC_DEV \
(AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC1)
#else
#define CFG_HW_AUD_INPUT_PATH_ASRMIC_DEV \
(AUD_CHANNEL_MAP_CH0 | AUD_VMIC_MAP_VMIC1)
#endif
const struct AUD_IO_PATH_CFG_T
cfg_audio_input_path_cfg[CFG_HW_AUD_INPUT_PATH_NUM] = {
#if defined(SPEECH_TX_AEC_CODEC_REF)
// NOTE: If enable Ch5 and CH6, need to add channel_num when setup
// audioflinger stream
{
AUD_INPUT_PATH_MAINMIC,
CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV | AUD_CHANNEL_MAP_CH4,
},
#else
{
AUD_INPUT_PATH_MAINMIC,
CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV,
},
#endif
{
AUD_INPUT_PATH_LINEIN,
CFG_HW_AUD_INPUT_PATH_LINEIN_DEV,
},
#ifdef VOICE_DETECTOR_EN
{
AUD_INPUT_PATH_VADMIC,
CFG_HW_AUD_INPUT_PATH_VADMIC_DEV,
},
#else
{
AUD_INPUT_PATH_ASRMIC,
CFG_HW_AUD_INPUT_PATH_ASRMIC_DEV,
},
#endif
};
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_enable_cfg = {
HAL_IOMUX_PIN_NUM, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE};
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_detecter_cfg = {
HAL_IOMUX_PIN_NUM, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE};
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_indicator_cfg =
{HAL_IOMUX_PIN_NUM, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE};
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_hw_tws_channel_cfg = {
HAL_IOMUX_PIN_P1_0, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE // HAL_IOMUX_PIN_P1_5
// 500:HAL_IOMUX_PIN_P2_5
};
/*
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_INT ={
HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE
};
*/
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SDA = {
HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE};
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SCL = {
HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
HAL_IOMUX_PIN_PULLUP_ENABLE};
bool tgt_tws_get_channel_is_right(void) {
#ifdef __FIXED_TWS_EAR_SIDE__
return TWS_EAR_SIDE_ROLE;
#else
return hal_gpio_pin_get_val((enum HAL_GPIO_PIN_T)cfg_hw_tws_channel_cfg.pin);
#endif
}
const IIR_CFG_T audio_eq_sw_iir_cfg = {
.gain0 = 0,
.gain1 = 0,
.num = 5,
.param = {{IIR_TYPE_PEAK, .0, 200, 2},
{IIR_TYPE_PEAK, .0, 600, 2},
{IIR_TYPE_PEAK, .0, 2000.0, 2},
{IIR_TYPE_PEAK, .0, 6000.0, 2},
{IIR_TYPE_PEAK, .0, 12000.0, 2}}};
const IIR_CFG_T *const audio_eq_sw_iir_cfg_list[EQ_SW_IIR_LIST_NUM] = {
&audio_eq_sw_iir_cfg,
};
const FIR_CFG_T audio_eq_hw_fir_cfg_44p1k = {.gain = 0.0f,
.len = 384,
.coef = {
(1 << 23) - 1,
}};
const FIR_CFG_T audio_eq_hw_fir_cfg_48k = {.gain = 0.0f,
.len = 384,
.coef = {
(1 << 23) - 1,
}};
const FIR_CFG_T audio_eq_hw_fir_cfg_96k = {.gain = 0.0f,
.len = 384,
.coef = {
(1 << 23) - 1,
}};
const FIR_CFG_T *const audio_eq_hw_fir_cfg_list[EQ_HW_FIR_LIST_NUM] = {
&audio_eq_hw_fir_cfg_44p1k,
&audio_eq_hw_fir_cfg_48k,
&audio_eq_hw_fir_cfg_96k,
};
// hardware dac iir eq
const IIR_CFG_T audio_eq_hw_dac_iir_cfg = {.gain0 = 0,
.gain1 = 0,
.num = 8,
.param = {
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
}};
const IIR_CFG_T *const POSSIBLY_UNUSED
audio_eq_hw_dac_iir_cfg_list[EQ_HW_DAC_IIR_LIST_NUM] = {
&audio_eq_hw_dac_iir_cfg,
};
// hardware dac iir eq
const IIR_CFG_T audio_eq_hw_adc_iir_adc_cfg = {
.gain0 = 0,
.gain1 = 0,
.num = 1,
.param = {
{IIR_TYPE_PEAK, 0.0, 1000.0, 0.7},
}};
const IIR_CFG_T *const POSSIBLY_UNUSED
audio_eq_hw_adc_iir_cfg_list[EQ_HW_ADC_IIR_LIST_NUM] = {
&audio_eq_hw_adc_iir_adc_cfg,
};
// hardware iir eq
const IIR_CFG_T audio_eq_hw_iir_cfg = {.gain0 = 0,
.gain1 = 0,
.num = 8,
.param = {
{IIR_TYPE_PEAK, -10.1, 100.0, 7},
{IIR_TYPE_PEAK, -10.1, 400.0, 7},
{IIR_TYPE_PEAK, -10.1, 700.0, 7},
{IIR_TYPE_PEAK, -10.1, 1000.0, 7},
{IIR_TYPE_PEAK, -10.1, 3000.0, 7},
{IIR_TYPE_PEAK, -10.1, 5000.0, 7},
{IIR_TYPE_PEAK, -10.1, 7000.0, 7},
{IIR_TYPE_PEAK, -10.1, 9000.0, 7},
}};
const IIR_CFG_T *const POSSIBLY_UNUSED
audio_eq_hw_iir_cfg_list[EQ_HW_IIR_LIST_NUM] = {
&audio_eq_hw_iir_cfg,
};
const DrcConfig audio_drc_cfg = {.knee = 3,
.filter_type = {14, -1},
.band_num = 2,
.look_ahead_time = 10,
.band_settings = {
{-20, 0, 2, 3, 3000, 1},
{-20, 0, 2, 3, 3000, 1},
}};
const LimiterConfig audio_drc2_cfg = {
.knee = 2,
.look_ahead_time = 10,
.threshold = -20,
.makeup_gain = 19,
.ratio = 1000,
.attack_time = 3,
.release_time = 3000,
};
const SpectrumFixConfig audio_spectrum_cfg = {
.freq_num = 9,
.freq_list = {200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800},
};