343 lines
13 KiB
C
343 lines
13 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright 2015-2019 BES.
|
|
* All rights reserved. All unpublished rights reserved.
|
|
*
|
|
* No part of this work may be used or reproduced in any form or by any
|
|
* means, or stored in a database or retrieval system, without prior written
|
|
* permission of BES.
|
|
*
|
|
* Use of this work is governed by a license granted by BES.
|
|
* This work contains confidential and proprietary information of
|
|
* BES. which is protected by copyright, trade secret,
|
|
* trademark and other intellectual property rights.
|
|
*
|
|
****************************************************************************/
|
|
#include "tgt_hardware.h"
|
|
#include "drc.h"
|
|
#include "fir_process.h"
|
|
#include "iir_process.h"
|
|
#include "limiter.h"
|
|
#include "spectrum_fix.h"
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_hw_pinmux_pwl[CFG_HW_PLW_NUM] = {
|
|
#if (CFG_HW_PLW_NUM > 0)
|
|
{HAL_IOMUX_PIN_LED2, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE},
|
|
{HAL_IOMUX_PIN_LED1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE},
|
|
#endif
|
|
};
|
|
|
|
#ifdef __APP_USE_LED_INDICATE_IBRT_STATUS__
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_ibrt_indication_pinmux_pwl[3] = {
|
|
{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE},
|
|
{HAL_IOMUX_PIN_LED1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VBAT,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE},
|
|
{HAL_IOMUX_PIN_LED2, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VBAT,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE},
|
|
};
|
|
#endif
|
|
|
|
#ifdef __KNOWLES
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_pinmux_uart[2] = {
|
|
{HAL_IOMUX_PIN_P2_2, HAL_IOMUX_FUNC_UART2_RX, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_NOPULL},
|
|
{HAL_IOMUX_PIN_P2_3, HAL_IOMUX_FUNC_UART2_TX, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_NOPULL},
|
|
};
|
|
#endif
|
|
|
|
// adckey define
|
|
const uint16_t CFG_HW_ADCKEY_MAP_TABLE[CFG_HW_ADCKEY_NUMBER] = {
|
|
#if (CFG_HW_ADCKEY_NUMBER > 0)
|
|
HAL_KEY_CODE_FN9, HAL_KEY_CODE_FN8, HAL_KEY_CODE_FN7,
|
|
HAL_KEY_CODE_FN6, HAL_KEY_CODE_FN5, HAL_KEY_CODE_FN4,
|
|
HAL_KEY_CODE_FN3, HAL_KEY_CODE_FN2, HAL_KEY_CODE_FN1,
|
|
#endif
|
|
};
|
|
|
|
// gpiokey define
|
|
#define CFG_HW_GPIOKEY_DOWN_LEVEL (0)
|
|
#define CFG_HW_GPIOKEY_UP_LEVEL (1)
|
|
const struct HAL_KEY_GPIOKEY_CFG_T cfg_hw_gpio_key_cfg[CFG_HW_GPIOKEY_NUM] = {
|
|
/*
|
|
#if (CFG_HW_GPIOKEY_NUM > 0)
|
|
#ifdef BES_AUDIO_DEV_Main_Board_9v0
|
|
{HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P0_3, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
{HAL_KEY_CODE_FN2,{HAL_IOMUX_PIN_P0_0, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
{HAL_KEY_CODE_FN3,{HAL_IOMUX_PIN_P0_1, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
{HAL_KEY_CODE_FN4,{HAL_IOMUX_PIN_P0_2, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
//{HAL_KEY_CODE_FN5,{HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
// {HAL_KEY_CODE_FN6,{HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #else #ifndef
|
|
TPORTS_KEY_COEXIST {HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_3,
|
|
HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE}}, {HAL_KEY_CODE_FN2,{HAL_IOMUX_PIN_P1_0,
|
|
HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
// {HAL_KEY_CODE_FN3,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
{HAL_KEY_CODE_FN15,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #else
|
|
{HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_3, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
{HAL_KEY_CODE_FN15,{HAL_IOMUX_PIN_P1_0, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #endif #endif
|
|
#ifdef IS_MULTI_AI_ENABLED
|
|
//{HAL_KEY_CODE_FN13,{HAL_IOMUX_PIN_P1_3, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
//{HAL_KEY_CODE_FN14,{HAL_IOMUX_PIN_P1_2, HAL_IOMUX_FUNC_AS_GPIO,
|
|
HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}}, #endif #endif
|
|
*/
|
|
{HAL_KEY_CODE_FN1,
|
|
{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE}},
|
|
};
|
|
|
|
// bt config
|
|
// const char *BT_LOCAL_NAME = TO_STRING(BT_DEV_NAME) "\0";
|
|
const char *BT_LOCAL_NAME = "PineBuds Pro";
|
|
const char *BLE_DEFAULT_NAME = "BES_BLE";
|
|
uint8_t ble_addr[6] = {
|
|
#ifdef BLE_DEV_ADDR
|
|
BLE_DEV_ADDR
|
|
#else
|
|
0xBE, 0x99, 0x34, 0x45,
|
|
0x56, 0x67
|
|
#endif
|
|
};
|
|
uint8_t bt_addr[6] = {
|
|
#ifdef BT_DEV_ADDR
|
|
BT_DEV_ADDR
|
|
#else
|
|
0x1e, 0x57, 0x34, 0x45,
|
|
0x56, 0x67
|
|
#endif
|
|
};
|
|
|
|
// audio config
|
|
// freq bands range {[0k:2.5K], [2.5k:5K], [5k:7.5K], [7.5K:10K], [10K:12.5K],
|
|
// [12.5K:15K], [15K:17.5K], [17.5K:20K]} gain range -12~+12
|
|
const int8_t cfg_aud_eq_sbc_band_settings[CFG_HW_AUD_EQ_NUM_BANDS] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0};
|
|
|
|
#define TX_PA_GAIN CODEC_TX_PA_GAIN_DEFAULT
|
|
|
|
const struct CODEC_DAC_VOL_T codec_dac_vol[TGT_VOLUME_LEVEL_QTY] = {
|
|
{TX_PA_GAIN, 0x03, -21}, {TX_PA_GAIN, 0x03, -99},
|
|
{TX_PA_GAIN, 0x03, -45}, {TX_PA_GAIN, 0x03, -42},
|
|
{TX_PA_GAIN, 0x03, -39}, {TX_PA_GAIN, 0x03, -36},
|
|
{TX_PA_GAIN, 0x03, -33}, {TX_PA_GAIN, 0x03, -30},
|
|
{TX_PA_GAIN, 0x03, -27}, {TX_PA_GAIN, 0x03, -24},
|
|
{TX_PA_GAIN, 0x03, -21}, {TX_PA_GAIN, 0x03, -18},
|
|
{TX_PA_GAIN, 0x03, -15}, {TX_PA_GAIN, 0x03, -12},
|
|
{TX_PA_GAIN, 0x03, -9}, {TX_PA_GAIN, 0x03, -6},
|
|
{TX_PA_GAIN, 0x03, -3}, {TX_PA_GAIN, 0x03, 0}, // 0dBm
|
|
};
|
|
|
|
#if SPEECH_CODEC_CAPTURE_CHANNEL_NUM == 2
|
|
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
|
|
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC2 | \
|
|
AUD_VMIC_MAP_VMIC3)
|
|
#elif SPEECH_CODEC_CAPTURE_CHANNEL_NUM == 3
|
|
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
|
|
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH1 | AUD_CHANNEL_MAP_CH4 | \
|
|
AUD_VMIC_MAP_VMIC1)
|
|
#else
|
|
#define CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV \
|
|
(AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC3)
|
|
#endif
|
|
|
|
#define CFG_HW_AUD_INPUT_PATH_LINEIN_DEV \
|
|
(AUD_CHANNEL_MAP_CH0 | AUD_CHANNEL_MAP_CH1)
|
|
#ifdef VOICE_DETECTOR_EN
|
|
#define CFG_HW_AUD_INPUT_PATH_VADMIC_DEV \
|
|
(AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC1)
|
|
#else
|
|
#define CFG_HW_AUD_INPUT_PATH_ASRMIC_DEV \
|
|
(AUD_CHANNEL_MAP_CH4 | AUD_VMIC_MAP_VMIC3)
|
|
#endif
|
|
|
|
const struct AUD_IO_PATH_CFG_T
|
|
cfg_audio_input_path_cfg[CFG_HW_AUD_INPUT_PATH_NUM] = {
|
|
#if defined(SPEECH_TX_AEC_CODEC_REF)
|
|
// NOTE: If enable Ch5 and CH6, need to add channel_num when setup
|
|
// audioflinger stream
|
|
{
|
|
AUD_INPUT_PATH_MAINMIC,
|
|
CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV | AUD_CHANNEL_MAP_CH4,
|
|
},
|
|
#else
|
|
{
|
|
AUD_INPUT_PATH_MAINMIC,
|
|
CFG_HW_AUD_INPUT_PATH_MAINMIC_DEV,
|
|
},
|
|
#endif
|
|
{
|
|
AUD_INPUT_PATH_LINEIN,
|
|
CFG_HW_AUD_INPUT_PATH_LINEIN_DEV,
|
|
},
|
|
#ifdef VOICE_DETECTOR_EN
|
|
{
|
|
AUD_INPUT_PATH_VADMIC,
|
|
CFG_HW_AUD_INPUT_PATH_VADMIC_DEV,
|
|
},
|
|
#else
|
|
{
|
|
AUD_INPUT_PATH_ASRMIC,
|
|
CFG_HW_AUD_INPUT_PATH_ASRMIC_DEV,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_enable_cfg = {
|
|
HAL_IOMUX_PIN_NUM, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE};
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_detecter_cfg = {
|
|
HAL_IOMUX_PIN_P1_1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE};
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_indicator_cfg =
|
|
{HAL_IOMUX_PIN_NUM, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE};
|
|
|
|
/*
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_INT ={
|
|
HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE
|
|
};
|
|
*/
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SDA = {
|
|
HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE};
|
|
|
|
const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SCL = {
|
|
HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO,
|
|
HAL_IOMUX_PIN_PULLUP_ENABLE};
|
|
|
|
const IIR_CFG_T audio_eq_sw_iir_cfg = {
|
|
.gain0 = 0,
|
|
.gain1 = 0,
|
|
.num = 5,
|
|
.param = {{IIR_TYPE_PEAK, .0, 200, 2},
|
|
{IIR_TYPE_PEAK, .0, 600, 2},
|
|
{IIR_TYPE_PEAK, .0, 2000.0, 2},
|
|
{IIR_TYPE_PEAK, .0, 6000.0, 2},
|
|
{IIR_TYPE_PEAK, .0, 12000.0, 2}}};
|
|
|
|
const IIR_CFG_T *const audio_eq_sw_iir_cfg_list[EQ_SW_IIR_LIST_NUM] = {
|
|
&audio_eq_sw_iir_cfg,
|
|
};
|
|
|
|
const FIR_CFG_T audio_eq_hw_fir_cfg_44p1k = {.gain = 0.0f,
|
|
.len = 384,
|
|
.coef = {
|
|
(1 << 23) - 1,
|
|
}};
|
|
|
|
const FIR_CFG_T audio_eq_hw_fir_cfg_48k = {.gain = 0.0f,
|
|
.len = 384,
|
|
.coef = {
|
|
(1 << 23) - 1,
|
|
}};
|
|
|
|
const FIR_CFG_T audio_eq_hw_fir_cfg_96k = {.gain = 0.0f,
|
|
.len = 384,
|
|
.coef = {
|
|
(1 << 23) - 1,
|
|
}};
|
|
|
|
const FIR_CFG_T *const audio_eq_hw_fir_cfg_list[EQ_HW_FIR_LIST_NUM] = {
|
|
&audio_eq_hw_fir_cfg_44p1k,
|
|
&audio_eq_hw_fir_cfg_48k,
|
|
&audio_eq_hw_fir_cfg_96k,
|
|
};
|
|
|
|
// hardware dac iir eq
|
|
const IIR_CFG_T audio_eq_hw_dac_iir_cfg = {.gain0 = 0,
|
|
.gain1 = 0,
|
|
.num = 8,
|
|
.param = {
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
{IIR_TYPE_PEAK, 0, 1000.0, 0.7},
|
|
}};
|
|
|
|
const IIR_CFG_T *const POSSIBLY_UNUSED
|
|
audio_eq_hw_dac_iir_cfg_list[EQ_HW_DAC_IIR_LIST_NUM] = {
|
|
&audio_eq_hw_dac_iir_cfg,
|
|
};
|
|
|
|
// hardware dac iir eq
|
|
const IIR_CFG_T audio_eq_hw_adc_iir_adc_cfg = {
|
|
.gain0 = 0,
|
|
.gain1 = 0,
|
|
.num = 1,
|
|
.param = {
|
|
{IIR_TYPE_PEAK, 0.0, 1000.0, 0.7},
|
|
}};
|
|
|
|
const IIR_CFG_T *const POSSIBLY_UNUSED
|
|
audio_eq_hw_adc_iir_cfg_list[EQ_HW_ADC_IIR_LIST_NUM] = {
|
|
&audio_eq_hw_adc_iir_adc_cfg,
|
|
};
|
|
|
|
// hardware iir eq
|
|
const IIR_CFG_T audio_eq_hw_iir_cfg = {.gain0 = 0,
|
|
.gain1 = 0,
|
|
.num = 8,
|
|
.param = {
|
|
{IIR_TYPE_PEAK, -10.1, 100.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 400.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 700.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 1000.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 3000.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 5000.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 7000.0, 7},
|
|
{IIR_TYPE_PEAK, -10.1, 9000.0, 7},
|
|
|
|
}};
|
|
|
|
const IIR_CFG_T *const POSSIBLY_UNUSED
|
|
audio_eq_hw_iir_cfg_list[EQ_HW_IIR_LIST_NUM] = {
|
|
&audio_eq_hw_iir_cfg,
|
|
};
|
|
|
|
const DrcConfig audio_drc_cfg = {.knee = 3,
|
|
.filter_type = {14, -1},
|
|
.band_num = 2,
|
|
.look_ahead_time = 10,
|
|
.band_settings = {
|
|
{-20, 0, 2, 3, 3000, 1},
|
|
{-20, 0, 2, 3, 3000, 1},
|
|
}};
|
|
|
|
const LimiterConfig audio_drc2_cfg = {
|
|
.knee = 2,
|
|
.look_ahead_time = 10,
|
|
.threshold = -20,
|
|
.makeup_gain = 19,
|
|
.ratio = 1000,
|
|
.attack_time = 3,
|
|
.release_time = 3000,
|
|
};
|
|
|
|
const SpectrumFixConfig audio_spectrum_cfg = {
|
|
.freq_num = 9,
|
|
.freq_list = {200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800},
|
|
};
|