pinebuds/config/bak_open/tgt_hardware.h
2022-09-13 17:35:13 +08:00

148 lines
4.2 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#ifndef __TGT_HARDWARE__
#define __TGT_HARDWARE__
#ifdef __cplusplus
extern "C" {
#endif
#include "hal_iomux.h"
#include "hal_gpio.h"
#include "hal_key.h"
#include "hal_aud.h"
//config hwardware codec iir.
#define EQ_HW_DAC_IIR_LIST_NUM 1
#define EQ_HW_ADC_IIR_LIST_NUM 1
#define EQ_HW_IIR_LIST_NUM 1
#define EQ_SW_IIR_LIST_NUM 1
#define EQ_HW_FIR_LIST_NUM 3
//pwl
#ifdef __BT_DEBUG_TPORTS__
#define CFG_HW_PLW_NUM (0)
#else
#ifdef __APP_USE_LED_INDICATE_IBRT_STATUS__
#define CFG_HW_PLW_NUM (0)
#else
#define CFG_HW_PLW_NUM (2)
#endif
#endif
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_hw_pinmux_pwl[CFG_HW_PLW_NUM];
#ifdef __APP_USE_LED_INDICATE_IBRT_STATUS__
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_ibrt_indication_pinmux_pwl[3];
#endif
#ifdef __KNOWLES
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_pinmux_uart[2];
#endif
//adckey define
#define CFG_HW_ADCKEY_NUMBER 0
#define CFG_HW_ADCKEY_BASE 0
#define CFG_HW_ADCKEY_ADC_MAXVOLT 1000
#define CFG_HW_ADCKEY_ADC_MINVOLT 0
#define CFG_HW_ADCKEY_ADC_KEYVOLT_BASE 130
extern const uint16_t CFG_HW_ADCKEY_MAP_TABLE[CFG_HW_ADCKEY_NUMBER];
#define BTA_AV_CO_SBC_MAX_BITPOOL 52
#ifdef __BT_DEBUG_TPORTS__
#ifdef TPORTS_KEY_COEXIST
#define CFG_HW_GPIOKEY_NUM (2)
#else
#define CFG_HW_GPIOKEY_NUM (0)
#endif
#else
//gpiokey define
#ifdef IS_MULTI_AI_ENABLED
#define CFG_HW_GPIOKEY_NUM (3)
#elif BES_AUDIO_DEV_Main_Board_9v0
#define CFG_HW_GPIOKEY_NUM (6)
#else
#define CFG_HW_GPIOKEY_NUM (1)
#endif
#endif
extern const struct HAL_KEY_GPIOKEY_CFG_T cfg_hw_gpio_key_cfg[CFG_HW_GPIOKEY_NUM];
// ANC function key
#define ANC_FUNCTION_KEY HAL_KEY_CODE_PWR
// ANC coefficient curve number
#define ANC_COEF_NUM (1)
//#define ANC_TALK_THROUGH
#ifdef ANC_TALK_THROUGH
#define ANC_COEF_LIST_NUM (ANC_COEF_NUM + 1)
#else
#define ANC_COEF_LIST_NUM (ANC_COEF_NUM)
#endif
#define ANC_FF_MIC_CH_L AUD_CHANNEL_MAP_CH0
#define ANC_FF_MIC_CH_R AUD_CHANNEL_MAP_CH1
#define ANC_FB_MIC_CH_L AUD_CHANNEL_MAP_CH2
#define ANC_FB_MIC_CH_R AUD_CHANNEL_MAP_CH3
// audio codec
#define CFG_HW_AUD_INPUT_PATH_NUM 3
extern const struct AUD_IO_PATH_CFG_T cfg_audio_input_path_cfg[CFG_HW_AUD_INPUT_PATH_NUM];
#define CFG_HW_AUD_OUTPUT_PATH_SPEAKER_DEV (AUD_CHANNEL_MAP_CH0)
#define CFG_HW_AUD_SIDETONE_MIC_DEV (AUD_CHANNEL_MAP_CH0)
#define CFG_HW_AUD_SIDETONE_GAIN_DBVAL (-20)
//bt config
extern const char *BT_LOCAL_NAME;
extern const char *BLE_DEFAULT_NAME;
extern uint8_t ble_addr[6];
extern uint8_t bt_addr[6];
#define CODEC_SADC_VOL (12)
extern const struct CODEC_DAC_VOL_T codec_dac_vol[TGT_VOLUME_LEVEL_QTY];
//range -12~+12
#define CFG_HW_AUD_EQ_NUM_BANDS (8)
extern const int8_t cfg_aud_eq_sbc_band_settings[CFG_HW_AUD_EQ_NUM_BANDS];
#define CFG_AUD_EQ_IIR_NUM_BANDS (4)
//battery info
#define APP_BATTERY_MIN_MV (3200)
#define APP_BATTERY_PD_MV (3100)
#define APP_BATTERY_MAX_MV (4200)
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_enable_cfg;
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_detecter_cfg;
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP app_battery_ext_charger_indicator_cfg;
//extern const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_INT;
extern bool tgt_tws_get_channel_is_right(void);
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SDA;
extern const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SCL;
#ifdef __cplusplus
}
#endif
#endif