pinebuds/platform/drivers/norflash/norflash_gd25lq32c.c
Ben V. Brown 75381150fd Formatting
Formatting Pass 1

Lots of fixups to adding stdint and stdbool all over the place

Formatting Pass 2
Formatting Pass 3
Formatting Pass 4

Update app_bt_stream.cpp
2023-02-02 07:56:49 +11:00

652 lines
20 KiB
C

/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#include "norflash_gd25lq32c.h"
#include "hal_norflaship.h"
#include "hal_timer.h"
#include "hal_trace.h"
#include "norflash_cfg.h"
#include "norflash_drv.h"
#include "plat_types.h"
static void gd25lq32c_write_status_s0_s15(uint16_t status, uint8_t len) {
norflash_write_reg(GD25LQ32C_CMD_WRITE_STATUS, (uint8_t *)&status, len);
}
static int gd25lq32c_write_status(enum DRV_NORFLASH_W_STATUS_T type,
uint32_t param) {
uint8_t status_s0_s7;
uint8_t status_s8_s15;
uint32_t bp_mask = 0;
union DRV_NORFLASH_SEC_REG_CFG_T cfg;
bool has_quad;
if (type != DRV_NORFLASH_W_STATUS_INIT && type != DRV_NORFLASH_W_STATUS_QE &&
type != DRV_NORFLASH_W_STATUS_LB && type != DRV_NORFLASH_W_STATUS_BP) {
return 1;
}
has_quad =
!!(norflash_get_supported_mode() &
(HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO));
if (type == DRV_NORFLASH_W_STATUS_INIT) {
gd25lq32c_write_status_s0_s15(param, (has_quad ? 2 : 1));
return 0;
}
status_s0_s7 = norflash_read_status_s0_s7();
if (type == DRV_NORFLASH_W_STATUS_BP) {
bp_mask = norflash_get_block_protect_mask();
status_s0_s7 = (status_s0_s7 & ~bp_mask) | (param & bp_mask);
}
if (has_quad) {
status_s8_s15 = norflash_read_status_s8_s15();
if (type == DRV_NORFLASH_W_STATUS_QE) {
if (param) {
status_s8_s15 |= GD25LQ32C_QE_BIT_MASK;
} else {
status_s8_s15 &= ~(GD25LQ32C_QE_BIT_MASK);
}
} else if (type == DRV_NORFLASH_W_STATUS_BP) {
param >>= 8;
bp_mask >>= 8;
status_s8_s15 = (status_s8_s15 & ~bp_mask) | (param & bp_mask);
} else if (type == DRV_NORFLASH_W_STATUS_LB) {
cfg = norflash_get_security_register_config();
if (!cfg.s.enabled) {
return 2;
}
if (cfg.s.lb == SEC_REG_LB_S11_S13) {
if (param >= 3) {
return 3;
}
status_s8_s15 |= (STATUS_S11_LB1_BIT_MASK << param);
} else if (cfg.s.lb == SEC_REG_LB_S10) {
status_s8_s15 |= STATUS_S10_LB_BIT_MASK;
} else {
return 4;
}
}
gd25lq32c_write_status_s0_s15(status_s0_s7 | (status_s8_s15 << 8), 2);
} else {
gd25lq32c_write_status_s0_s15(status_s0_s7, 1);
}
return 0;
}
// ----------------------
// GigaDevice
// ----------------------
const struct NORFLASH_CFG_T gd25lq64c_cfg = {
.id =
{
0xC8,
0x60,
0x17,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_1024,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25LQ64C_TOTAL_SIZE,
.max_speed = 104 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25lq32c_cfg = {
.id =
{
0xC8,
0x60,
0x16,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_5_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_1024,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25LQ32C_TOTAL_SIZE,
.max_speed = 120 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25lq16c_cfg = {
.id =
{
0xC8,
0x60,
0x15,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25LQ16C_TOTAL_SIZE,
.max_speed = 104 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25lq80c_cfg = {
.id =
{
0xC8,
0x60,
0x14,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_6_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25LQ80C_TOTAL_SIZE,
.max_speed = 104 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25q80c_cfg = {
.id =
{
0xC8,
0x40,
0x14,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_5_EIGHTH,
.others = SPEED_RATIO_5_EIGHTH,
},
},
.crm_en_bits = 0xA0,
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X0000,
.size = SEC_REG_SIZE_256,
.offset = SEC_REG_OFFSET_0X0100,
.cnt = SEC_REG_CNT_4,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S10,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25Q80C_TOTAL_SIZE,
#ifdef FLASH_HPM
.max_speed = 120 * 1000 * 1000,
#else
.max_speed = 104 * 1000 * 1000,
#endif
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
#ifdef FLASH_HPM
HAL_NORFLASH_OP_MODE_HIGH_PERFORMANCE |
#endif
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25d40c_cfg = {
.id =
{
0xC8,
0x40,
0x13,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_6_EIGHTH,
},
},
.crm_en_bits = 0,
.crm_dis_bits = 0,
.block_protect_mask = 0x1C,
.sec_reg_cfg =
{
.s =
{
.enabled = false,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25D40C_TOTAL_SIZE,
.max_speed = 80 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_PAGE_PROGRAM),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T gd25d20c_cfg = {
.id =
{
0xC8,
0x40,
0x12,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_6_EIGHTH,
.others = SPEED_RATIO_6_EIGHTH,
},
},
.crm_en_bits = 0,
.crm_dis_bits = 0,
.block_protect_mask = 0x1C,
.sec_reg_cfg =
{
.s =
{
.enabled = false,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = GD25D20C_TOTAL_SIZE,
.max_speed = 80 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_PAGE_PROGRAM),
.write_status = gd25lq32c_write_status,
};
// ----------------------
// Puya
// ----------------------
const struct NORFLASH_CFG_T p25q16l_cfg = {
.id =
{
0x85,
0x60,
0x15,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_3_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = P25Q16L_TOTAL_SIZE,
.max_speed =
70 * 1000 * 1000, // P25Q80L=70M, P25Q80H=104M, P25Q80U=70M/104M
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_DUAL_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T p25q80h_cfg = {
.id =
{
0x85,
0x60,
0x14,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_3_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = P25Q80H_TOTAL_SIZE,
.max_speed =
70 * 1000 * 1000, // P25Q80L=70M, P25Q80H=104M, P25Q80U=70M/104M
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_DUAL_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T p25q40h_cfg = {
.id =
{
0x85,
0x60,
0x13,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_3_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = P25Q40H_TOTAL_SIZE,
.max_speed =
70 * 1000 * 1000, // P25Q21L=70M, P25Q21H=104M, P25Q21U=70M/104M
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_DUAL_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
const struct NORFLASH_CFG_T p25q21h_cfg = {
.id =
{
0x85,
0x40,
0x12,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_3_EIGHTH,
.others = SPEED_RATIO_8_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x407C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X1000,
.size = SEC_REG_SIZE_512,
.offset = SEC_REG_OFFSET_0X1000,
.cnt = SEC_REG_CNT_3,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S11_S13,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = P25Q21H_TOTAL_SIZE,
.max_speed =
70 * 1000 * 1000, // P25Q21L=70M, P25Q21H=104M, P25Q21U=70M/104M
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ | HAL_NORFLASH_OP_MODE_READ_WRAP |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_DUAL_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};
// ----------------------
// XTS
// ----------------------
const struct NORFLASH_CFG_T xt25q08b_cfg = {
.id =
{
0x0B,
0x60,
0x14,
},
.speed_ratio =
{
.s =
{
.std_read = SPEED_RATIO_7_EIGHTH,
.others = SPEED_RATIO_7_EIGHTH,
},
},
.crm_en_bits = (1 << 5) | (0 << 4),
.crm_dis_bits = 0,
.block_protect_mask = 0x403C,
.sec_reg_cfg =
{
.s =
{
.enabled = true,
.base = SEC_REG_BASE_0X0000,
.size = SEC_REG_SIZE_256,
.offset = SEC_REG_OFFSET_0X0100,
.cnt = SEC_REG_CNT_4,
.pp = SEC_REG_PP_256,
.lb = SEC_REG_LB_S10,
},
},
.page_size = GD25LQ32C_PAGE_SIZE,
.sector_size = GD25LQ32C_SECTOR_SIZE,
.block_size = GD25LQ32C_BLOCK_SIZE,
.total_size = XT25Q08B_TOTAL_SIZE,
.max_speed = 96 * 1000 * 1000,
.mode =
(HAL_NORFLASH_OP_MODE_STAND_SPI | HAL_NORFLASH_OP_MODE_FAST_SPI |
HAL_NORFLASH_OP_MODE_DUAL_OUTPUT | HAL_NORFLASH_OP_MODE_DUAL_IO |
HAL_NORFLASH_OP_MODE_QUAD_OUTPUT | HAL_NORFLASH_OP_MODE_QUAD_IO |
HAL_NORFLASH_OP_MODE_CONTINUOUS_READ |
HAL_NORFLASH_OP_MODE_PAGE_PROGRAM |
HAL_NORFLASH_OP_MODE_QUAD_PAGE_PROGRAM | HAL_NORFLASH_OP_MODE_SUSPEND),
.write_status = gd25lq32c_write_status,
};