455 lines
16 KiB
C
455 lines
16 KiB
C
/***************************************************************************
|
|
*
|
|
* Copyright 2015-2019 BES.
|
|
* All rights reserved. All unpublished rights reserved.
|
|
*
|
|
* No part of this work may be used or reproduced in any form or by any
|
|
* means, or stored in a database or retrieval system, without prior written
|
|
* permission of BES.
|
|
*
|
|
* Use of this work is governed by a license granted by BES.
|
|
* This work contains confidential and proprietary information of
|
|
* BES. which is protected by copyright, trade secret,
|
|
* trademark and other intellectual property rights.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef __BT_DRV_H__
|
|
#define __BT_DRV_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "cmsis.h"
|
|
#ifdef RTOS
|
|
#include "cmsis_os.h"
|
|
#endif
|
|
#include "hal_timer.h"
|
|
|
|
#include "hal_analogif.h"
|
|
#include "hal_trace.h"
|
|
|
|
#define BT_DRV_REG_OP_ENTER() \
|
|
do { \
|
|
uint32_t stime, spent_time; \
|
|
stime = hal_sys_timer_get();
|
|
#define BT_DRV_REG_OP_EXIT() \
|
|
spent_time = TICKS_TO_US(hal_sys_timer_get() - stime); \
|
|
if (spent_time > 300) \
|
|
TRACE(2, "%s exit, %dus", __func__, spent_time); \
|
|
} \
|
|
while (0) \
|
|
;
|
|
|
|
#define SBC_PKT_TYPE_DM1 0x3
|
|
#define SBC_PKT_TYPE_2EV3 0x6
|
|
#define SBC_PKT_TYPE_2DH5 0xe
|
|
|
|
#define BT_ACL_CONHDL_BIT (0x80)
|
|
|
|
#if defined(CHIP_BEST1400) || defined(CHIP_BEST1402) || defined(CHIP_BEST2001)
|
|
#define BTDRV_ISPI_RF_REG(reg) (((reg)&0xFFF) | 0x2000)
|
|
#else
|
|
#define BTDRV_ISPI_RF_REG(reg) (reg)
|
|
#endif
|
|
|
|
#define btdrv_read_rf_reg(reg, val) \
|
|
hal_analogif_reg_read(BTDRV_ISPI_RF_REG(reg), val)
|
|
#define btdrv_write_rf_reg(reg, val) \
|
|
hal_analogif_reg_write(BTDRV_ISPI_RF_REG(reg), val)
|
|
|
|
#define btdrv_delay(ms) hal_sys_timer_delay(MS_TO_TICKS(ms))
|
|
|
|
#define BTDIGITAL_REG(a) (*(volatile uint32_t *)(uintptr_t)(a))
|
|
#define BTDIGITAL_REG_WR(addr, value) \
|
|
(*(volatile uint32_t *)(uintptr_t)(addr)) = (value)
|
|
|
|
#define BTDIGITAL_BT_EM(a) (*(volatile uint16_t *)(uintptr_t)(a))
|
|
/// Macro to write a BT control structure field (16-bit wide)
|
|
#define BTDIGITAL_EM_BT_WR(addr, value) \
|
|
(*(volatile uint16_t *)(uintptr_t)(addr)) = (value)
|
|
|
|
#define BTDIGITAL_REG_SET_FIELD(reg, mask, shift, v) \
|
|
do { \
|
|
volatile unsigned int tmp = *(volatile unsigned int *)(reg); \
|
|
tmp &= ~(mask << shift); \
|
|
tmp |= (v << shift); \
|
|
*(volatile unsigned int *)(reg) = tmp; \
|
|
} while (0)
|
|
|
|
#define BTDIGITAL_REG_GET_FIELD(reg, mask, shift, v) \
|
|
do { \
|
|
volatile unsigned int tmp = *(volatile unsigned int *)(reg); \
|
|
v = (tmp >> shift) & mask; \
|
|
} while (0)
|
|
|
|
#define BT_DRV_DEBUG 0
|
|
#if BT_DRV_DEBUG
|
|
#define BT_DRV_TRACE(n, fmt, ...) TRACE(n, fmt, ##__VA_ARGS__)
|
|
#define BT_DRV_DUMP(s, buff, len) DUMP8(s, buff, len)
|
|
#else
|
|
#define BT_DRV_TRACE(n, fmt, ...) hal_trace_dummy(fmt, ##__VA_ARGS__)
|
|
#define BT_DRV_DUMP(s, buff, len) hal_dump_dummy(s, buff, len)
|
|
#endif
|
|
|
|
#define HCI_HOST_NB_CMP_PKTS_CMD_OPCODE 0x0C35
|
|
#define HCI_NB_CMP_PKTS_EVT_CODE 0x13
|
|
|
|
#if defined(CHIP_BEST2300)
|
|
#define BT_EM_ADDR_BASE (0xD021114A)
|
|
#define BT_EM_SIZE (110)
|
|
#define BLE_EM_CS_SIZE (90)
|
|
#define EM_BT_PWRCNTL_ADDR (BT_EM_ADDR_BASE + 0x16)
|
|
#define EM_BT_BT_EXT1_ADDR (BT_EM_ADDR_BASE + 0x66)
|
|
#define EM_BT_BITOFF_ADDR (BT_EM_ADDR_BASE + 0x02)
|
|
#define EM_BT_CLKOFF0_ADDR (BT_EM_ADDR_BASE + 0x04)
|
|
#define EM_BT_CLKOFF1_ADDR (BT_EM_ADDR_BASE + 0x06)
|
|
#define EM_BT_WINCNTL_ADDR (BT_EM_ADDR_BASE + 0x1A)
|
|
#define EM_BT_RXBIT_ADDR (BT_EM_ADDR_BASE + 0x56)
|
|
#define EM_BT_BTADDR1_ADDR (BT_EM_ADDR_BASE + 0xC)
|
|
#define EM_BT_LINKCNTL_ADDR (BT_EM_ADDR_BASE + 0x8)
|
|
#define EM_BT_RXDESCCNT_ADDR (BT_EM_ADDR_BASE + 0x5A)
|
|
|
|
#define EM_BT_AUDIOBUF_OFF 0xd021449c
|
|
#define EM_BT_RXACLBUFPTR_ADDR 0xd02115a0
|
|
#define REG_EM_BT_RXDESC_SIZE 14
|
|
|
|
#define LBRT_TX_PWR_FIX (3)
|
|
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc0000050)
|
|
#define DEFAULT_XTAL_FCAP 0x8080
|
|
|
|
#define BT_ERRORTYPESTAT_ADDR (0xd0220060)
|
|
#define MAX_NB_ACTIVE_ACL (3)
|
|
|
|
#elif defined(CHIP_BEST2300P) || defined(CHIP_BEST2300A) || \
|
|
defined(CHIP_BEST1400) || defined(CHIP_BEST1402) || defined(CHIP_BEST2001)
|
|
#define BT_EM_ADDR_BASE (0xD02111A2)
|
|
#define BT_EM_SIZE (110)
|
|
#define BLE_EM_CS_SIZE (90)
|
|
#define EM_BT_PWRCNTL_ADDR (BT_EM_ADDR_BASE + 0x16)
|
|
#define EM_BT_BT_EXT1_ADDR (BT_EM_ADDR_BASE + 0x66)
|
|
#define EM_BT_BT_EXT2_ADDR (BT_EM_ADDR_BASE + 0x68)
|
|
#define EM_BT_BITOFF_ADDR (BT_EM_ADDR_BASE + 0x02)
|
|
#define EM_BT_CLKOFF0_ADDR (BT_EM_ADDR_BASE + 0x04)
|
|
#define EM_BT_CLKOFF1_ADDR (BT_EM_ADDR_BASE + 0x06)
|
|
#define EM_BT_WINCNTL_ADDR (BT_EM_ADDR_BASE + 0x1A)
|
|
#define EM_BT_RXBIT_ADDR (BT_EM_ADDR_BASE + 0x56)
|
|
#define EM_BT_BTADDR1_ADDR (BT_EM_ADDR_BASE + 0xC)
|
|
#define EM_BT_LINKCNTL_ADDR (BT_EM_ADDR_BASE + 0x8)
|
|
#define BLE_CRCINIT1_ADDR (0xd02100c2)
|
|
#define EM_BT_RXDESCCNT_ADDR (BT_EM_ADDR_BASE + 0x5A)
|
|
|
|
#define BLE_MAXEVTIME_ADDR (0xd02100d0)
|
|
|
|
#define EM_BT_AUDIOBUF_OFF 0xd02144fc
|
|
#define EM_BT_RXACLBUFPTR_ADDR 0xd02115f8
|
|
#define REG_EM_BT_RXDESC_SIZE 16
|
|
|
|
#define LBRT_TX_PWR_FIX (3)
|
|
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc0000050)
|
|
#define BT_ERRORTYPESTAT_ADDR (0xd0220060)
|
|
#define MAX_NB_ACTIVE_ACL (3)
|
|
|
|
#ifdef CHIP_BEST2300A
|
|
#define DEFAULT_XTAL_FCAP 0x80ad // 8pf crstal No cap by luobin
|
|
#else
|
|
#define DEFAULT_XTAL_FCAP 0x8080
|
|
#endif
|
|
|
|
#else
|
|
#define BT_EM_ADDR_BASE (0xd0210190)
|
|
#define BT_EM_SIZE (96)
|
|
#define BT_CONTROLLER_CRASH_DUMP_ADDR_BASE (0xc00064cc)
|
|
#endif
|
|
|
|
// bt max slot clock
|
|
#define MAX_SLOT_CLOCK ((1L << 27) - 1)
|
|
// A slot is 625 us
|
|
#define SLOT_SIZE 625
|
|
#define XTAL_OFFSET 50
|
|
|
|
// #define __PASS_CI_TEST_SETTING__
|
|
#define BT_LOW_POWER_MODE 1
|
|
#define BT_HIGH_PERFORMANCE_MODE 2
|
|
// #define __ENABLE_LINK_POWER_CONTROL__
|
|
|
|
#define BT_RFMODE BT_LOW_POWER_MODE
|
|
// #define BT_RFMODE BT_HIGH_PERFORMANCE_MODE
|
|
// #define BT_50_FUNCTION
|
|
|
|
#define BT_POWERON 1
|
|
#define BT_POWEROFF 0
|
|
|
|
/// 8 bit access types
|
|
#define _8_Bit 8
|
|
/// 16 bit access types
|
|
#define _16_Bit 16
|
|
/// 32 bit access types
|
|
#define _32_Bit 32
|
|
|
|
#define BTDRV_PATCH_WRITING 0x0
|
|
#define BTDRV_PATCH_DONE 0x1
|
|
|
|
#define BTDRV_CFG_WRITING 0x0
|
|
#define BTDRV_CFG_DONE 0x1
|
|
|
|
#define HCI_DBG_RD_MEM_CMD_OPCODE 0xFC01
|
|
#define HCI_DBG_WR_MEM_CMD_OPCODE 0xFC02
|
|
#define HCI_DBG_DEL_PAR_CMD_OPCODE 0xFC03
|
|
#define HCI_DBG_FLASH_ID_CMD_OPCODE 0xFC05
|
|
#define HCI_DBG_FLASH_ER_CMD_OPCODE 0xFC06
|
|
#define HCI_DBG_FLASH_WR_CMD_OPCODE 0xFC07
|
|
#define HCI_DBG_FLASH_RD_CMD_OPCODE 0xFC08
|
|
#define HCI_DBG_RD_PAR_CMD_OPCODE 0xFC09
|
|
#define HCI_DBG_WR_PAR_CMD_OPCODE 0xFC0A
|
|
#define HCI_DBG_WLAN_COEX_CMD_OPCODE 0xFC0B
|
|
#define HCI_DBG_ENTER_TEST_MODE_CMD_OPCODE 0xFC0C
|
|
#define HCI_DBG_WLAN_COEXTST_SCEN_CMD_OPCODE 0xFC0D
|
|
#define HCI_DBG_SEND_LMP_CMD_OPCODE 0xFC0E
|
|
#define HCI_DBG_WR_SYNC_DATA_CFG_CMD_OPCODE 0xFC0F
|
|
#define HCI_DBG_RD_KE_STATS_CMD_OPCODE 0xFC10
|
|
#define HCI_DBG_PLF_RESET_CMD_OPCODE 0xFC11
|
|
#define HCI_DBG_RD_MEM_INFO_CMD_OPCODE 0xFC12
|
|
#define HCI_DBG_EMUL_TESTER_CMD_OPCODE 0xFC2D
|
|
#define HCI_DBG_SCATT_IMPROV_CMD_OPCODE 0xFC2E
|
|
#define HCI_DBG_RF_REG_RD_CMD_OPCODE 0xFC39
|
|
#define HCI_DBG_RF_REG_WR_CMD_OPCODE 0xFC3A
|
|
#define HCI_DBG_HW_REG_RD_CMD_OPCODE 0xFC30
|
|
#define HCI_DBG_HW_REG_WR_CMD_OPCODE 0xFC31
|
|
#define HCI_DBG_SET_BD_ADDR_CMD_OPCODE 0xFC32
|
|
#define HCI_DBG_SET_TYPE_PUB_CMD_OPCODE 0xFC33
|
|
#define HCI_DBG_SET_TYPE_RAND_CMD_OPCODE 0xFC34
|
|
#define HCI_DBG_SET_CRC_CMD_OPCODE 0xFC35
|
|
#define HCI_DBG_LLCP_DISCARD_CMD_OPCODE 0xFC36
|
|
#define HCI_DBG_RESET_RX_CNT_CMD_OPCODE 0xFC37
|
|
#define HCI_DBG_RESET_TX_CNT_CMD_OPCODE 0xFC38
|
|
#define HCI_DBG_SET_TX_PW_CMD_OPCODE 0xFC3B
|
|
#define HCI_DBG_SET_SYNCWORD_CMD_OPCODE 0xFC3C
|
|
|
|
// encrytion min and max key size
|
|
#define HCI_DBG_SET_ENCRYPTION_KEY_SIZE_CMD_OPCODE 0xFC41
|
|
// preferred key type default :combine key
|
|
#define HCI_DBG_SET_PREFERRED_KEY_TYPE_CMD_OPCODE 0xFC42
|
|
// creat unit key
|
|
#define HCI_DBG_CREAT_UNIT_KEY_CMD_OPCODE 0xFC43
|
|
// set clk drift and jitter
|
|
#define HCI_DBG_SET_LPCLK_DRIFT_JITTER_CMD_OPCODE 0xFC44
|
|
|
|
// change uart buadrate
|
|
#define HCI_DBG_CHANGE_UART_BAUDRATE_CMD_OPCODE 0xFC46
|
|
|
|
// set sleep enable and external wakeup enable
|
|
#define HCI_DBG_SET_SLEEP_EXWAKEUP_EN_CMD_OPCODE 0xFC47
|
|
|
|
// set private key
|
|
#define HCI_DBG_SET_SP_PRIVATE_KEY_CMD_OPCODE 0xFC48
|
|
|
|
// set public key
|
|
#define HCI_DBG_SET_SP_PUBLIC_KEY_CMD_OPCODE 0xFC49
|
|
|
|
// set errdata adopted
|
|
#define HCI_DBG_SET_ERRDATA_ADOPTED_CMD_OPCODE 0xFC4A
|
|
|
|
// set basic threshold
|
|
#define HCI_DBG_SET_BASIC_THRESHOLD_CMD_OPCODE 0xFC4B
|
|
|
|
// set edr threshold
|
|
#define HCI_DBG_SET_EDR_THRESHOLD_CMD_OPCODE 0xFC4C
|
|
|
|
// set basic algorithm
|
|
#define HCI_DBG_SET_BASIC_ALGORITHM_CMD_OPCODE 0xFC4D
|
|
|
|
// set edr alorithm
|
|
#define HCI_DBG_SET_EDR_ALGORITHM_CMD_OPCODE 0xFC4E
|
|
|
|
// set basic packet lut
|
|
#define HCI_DBG_SET_BASIC_PKT_LUT_CMD_OPCODE 0xFC4F
|
|
|
|
// set edr packet lut
|
|
#define HCI_DBG_SET_EDR_PKT_LUT_CMD_OPCODE 0xFC50
|
|
|
|
// set diag_bt_hw
|
|
#define HCI_DBG_SET_DIAG_BT_HW_CMD_OPCODE 0xFC54
|
|
// set diag ble hw
|
|
#define HCI_DBG_SET_DIAG_BLE_HW_CMD_OPCODE 0xFC55
|
|
// set diag sw
|
|
#define HCI_DBG_SET_DIAG_SW_CMD_OPCODE 0xFC56
|
|
|
|
// set ble channel assessment parameter
|
|
#define HCI_DBG_SET_BLE_CA_PARA_CMD_OPCODE 0xFC57
|
|
|
|
// set ble rf timing
|
|
|
|
// set ble rf timig
|
|
|
|
// set ble rl size
|
|
#define HCI_DBG_SET_RL_SIZE_CMD_OPCODE 0xFC5D
|
|
|
|
/// set hostwake
|
|
#define HCI_DBG_SET_HOSTWAKE_CMD_OPCODE 0xFC5E
|
|
// reserved for VCO test
|
|
#define HCI_DBG_BT_VCO_TEST_CMD_OPCODE 0xFCAA
|
|
|
|
#if defined(CHIP_BEST2300) || defined(CHIP_BEST2300P) || \
|
|
defined(CHIP_BEST2300A) || defined(CHIP_BEST2001) || \
|
|
defined(CHIP_BEST1400) || defined(CHIP_BEST1402)
|
|
|
|
/// set dle dft value
|
|
#define HCI_DBG_WR_DLE_DFT_VALUE_CMD_OPCODE 0xFC41
|
|
|
|
// set exernal wake up time oscillater wakeup time and radio wakeup time
|
|
#define HCI_DBG_SET_WAKEUP_TIME_CMD_OPCODE 0xFC71
|
|
|
|
#define HCI_DBG_SET_SLEEP_SETTING_CMD_OPCODE 0xFC77
|
|
|
|
// bt address not ble address
|
|
#define HCI_DBG_SET_BT_ADDR_CMD_OPCODE 0xFC72
|
|
// set pcm setting
|
|
#define HCI_DBG_SET_PCM_SETTING_CMD_OPCODE 0xFC74
|
|
|
|
#define HCI_DBG_SET_RSSI_THRHLD_CMD_OPCODE 0xFC76
|
|
|
|
// set sync buff size
|
|
#define HCI_DBG_SET_SYNC_BUF_SIZE_CMD_OPCODE 0xFC7F
|
|
// set afh algorithm
|
|
#define HCI_DBG_SET_AFH_ALGORITHM_CMD_OPCODE 0xFC80
|
|
// set local feature
|
|
#define HCI_DBG_SET_LOCAL_FEATURE_CMD_OPCODE 0xFC81
|
|
|
|
#define HCI_DBG_SET_BT_RF_TIMING_CMD_OPCODE 0xFC83
|
|
|
|
// set local extend feature
|
|
#define HCI_DBG_SET_LOCAL_EX_FEATURE_CMD_OPCODE 0xFC82
|
|
|
|
#define HCI_DBG_SET_2300_BT_RF_TIMING_CMD_OPCODE 0xFC83
|
|
|
|
#define HCI_DBG_SET_BLE_RF_TIMING_CMD_OPCODE 0xfc84
|
|
|
|
// bt setting interface
|
|
#define HCI_DBG_SET_BT_SETTING_CMD_OPCODE 0xFC86
|
|
// xiao add for nonsignaling test mode
|
|
#define HCI_DBG_NONSIG_TESTER_SETUP_CMD_OPCODE 0xFC87
|
|
/* xiao add for custom set param*/
|
|
#define HCI_DBG_SET_CUSTOM_PARAM_CMD_OPCODE 0xFC88
|
|
|
|
#define HCI_DBG_SET_SCO_SWITCH_CMD_OPCODE 0xFC89
|
|
|
|
#define HCI_DBG_SET_SNIFFER_ENV_CMD_OPCODE 0xFC8E
|
|
// set sco path
|
|
#define HCI_DBG_SET_SYNC_CONFIG_CMD_OPCODE 0xFC8F
|
|
|
|
#define HCI_DBG_START_TWS_EXCHANGE_CMD_OPCODE 0xFC91
|
|
|
|
#define HCI_DBG_BTADDR_EXCHANGE_CMD_OPCODE 0xFC92
|
|
|
|
#define HCI_DBG_SEND_DATA_TO_PEER_DEV_CMD_OPCODE 0xFC93
|
|
|
|
#define HCI_DBG_SCO_TX_SILENCE_CMD_OPCODE 0xFC94
|
|
|
|
#define HCI_DBG_SNIFFER_CMD_OPCODE 0xFC95
|
|
|
|
#define HCI_DBG_CSB_UPDATE_LINK_PARAM_CMD_OPCODE 0xFC96
|
|
|
|
#define HCI_DBG_SET_LINK_LBRT_CMD_OPCODE 0xFC97
|
|
|
|
#define HCI_DBG_SET_CON_SLV_BCST_DATA_CMD_OPCODE 0xFC98
|
|
#define HCI_DBG_SET_ROLE_SWITCH_INSTANT_CMD_OPCODE 0xFC99
|
|
#define HCI_DBG_LOW_LAYER_METRICS_CMD_OPCODE 0xFC9B
|
|
#define HCI_DBG_LMP_MESSAGE_RECORD_CMD_OPCODE 0xFC9C
|
|
|
|
#define HCI_DBG_SET_LOCAL_FEATURE_50_CMD_OPCODE 0xFC72
|
|
#define HCI_DBG_SET_SLEEP_SETTING_50_CMD_OPCODE 0xFC70
|
|
#define HCI_DBG_SET_BT_SETTING_50_CMD_OPCODE 0xFC71
|
|
|
|
#define HCI_DBG_SET_CUSTOM_PARAM_50_CMD_OPCODE 0xFC73
|
|
#define HCI_DBG_SET_BT_SETTING_EXT1_CMD_OPCODE 0xFCAE
|
|
#define HCI_DBG_SET_BT_TWS_LINK_CMD_OPCODE 0xFCAF
|
|
#define HCI_DBG_SET_AFH_FOLLOW_CMD_OPCODE 0xFCB0
|
|
#define HCI_DBG_SET_RF_RX_GAIN_THS_TBL_CMD_OPCODE 0xFCB1
|
|
#define HCI_DBG_SET_RF_RX_GAIN_FIXED_CMD_OPCODE 0xFCB2
|
|
|
|
#define HCI_DBG_SET_BT_SETTING_EXT2_CMD_OPCODE 0xFCB3
|
|
#define HCI_DBG_SET_IBRT_TEST_MODE_CMD_OPCODE 0xFCB4
|
|
#define HCI_DBG_SET_BT_LOCAL_CLK_CMD_OPCODE 0xFCB5
|
|
#define HCI_DBG_SET_FUNC_PATCH_CMD_OPCODE 0xFCB8
|
|
#define HCI_DBG_SET_TXPWR_MODE_CMD_OPCODE 0xFCB9
|
|
#define HCI_DBG_SET_SW_RSSI_CMD_OPCODE 0xFCBA
|
|
#define HCI_DBG_SET_ECC_DATA_TEST_CMD_OPCODE 0xFCBB
|
|
#define HCI_DBG_SET_IBRT_DATA_TEST_CMD_OPCODE 0xFCBC
|
|
#define HCI_DBG_SET_NWINSZ_RXGRN_TO_CMD_OPCODE 0xFCBD
|
|
#define HCI_DBG_ENABLE_SOFTBIT_CMD_OPCODE 0xFCBE
|
|
|
|
#else
|
|
// bt address not ble address
|
|
#define HCI_DBG_SET_BT_ADDR_CMD_OPCODE 0xFC40
|
|
// set exernal wake up time oscillater wakeup time and radio wakeup time
|
|
#define HCI_DBG_SET_WAKEUP_TIME_CMD_OPCODE 0xFC45
|
|
// set sco path
|
|
#define HCI_DBG_SET_SYNC_CONFIG_CMD_OPCODE 0xFC51
|
|
// set pcm setting
|
|
#define HCI_DBG_SET_PCM_SETTING_CMD_OPCODE 0xFC52
|
|
// set sync buff size
|
|
#define HCI_DBG_SET_SYNC_BUF_SIZE_CMD_OPCODE 0xFC53
|
|
// set local feature
|
|
#define HCI_DBG_SET_LOCAL_FEATURE_CMD_OPCODE 0xFC59
|
|
// bt setting interface
|
|
#define HCI_DBG_SET_BT_SETTING_CMD_OPCODE 0xFC5F
|
|
// set afh algorithm
|
|
#define HCI_DBG_SET_AFH_ALGORITHM_CMD_OPCODE 0xFC58
|
|
// set local extend feature
|
|
#define HCI_DBG_SET_LOCAL_EX_FEATURE_CMD_OPCODE 0xFC5A
|
|
|
|
#define HCI_DBG_SET_BT_RF_TIMING_CMD_OPCODE 0xFC5B
|
|
|
|
#define HCI_DBG_SET_BLE_RF_TIMING_CMD_OPCODE 0xFC5C
|
|
|
|
// xiao add for nonsignaling test mode
|
|
#define HCI_DBG_NONSIG_TESTER_SETUP_CMD_OPCODE 0xFC60
|
|
/* xiao add for custom set param*/
|
|
#define HCI_DBG_SET_CUSTOM_PARAM_CMD_OPCODE 0xFC61
|
|
|
|
#define HCI_DBG_SET_SCO_SWITCH_CMD_OPCODE 0xFC62
|
|
|
|
#define HCI_DBG_SET_SNIFFER_ENV_CMD_OPCODE 0xFC67
|
|
|
|
#define HCI_DBG_START_TWS_EXCHANGE_CMD_OPCODE 0xFC69
|
|
|
|
#define HCI_DBG_BTADDR_EXCHANGE_CMD_OPCODE 0xFC6A
|
|
|
|
#define HCI_DBG_SEND_DATA_TO_PEER_DEV_CMD_OPCODE 0xFC6B
|
|
|
|
#define HCI_DBG_SCO_TX_SILENCE_CMD_OPCODE 0xFC6C
|
|
|
|
#define HCI_DBG_SNIFFER_CMD_OPCODE 0xFC6D
|
|
|
|
#define HCI_DBG_BT_VCO_TEST_CMD_OPCODE 0xFCAA
|
|
|
|
// Only new controller IP has this funciton,it is a error opcode
|
|
#define HCI_DBG_SET_ROLE_SWITCH_INSTANT_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_LINK_LBRT_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_BT_SETTING_EXT1_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_BT_TWS_LINK_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_AFH_FOLLOW_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_RF_RX_GAIN_THS_TBL_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_RF_RX_GAIN_FIXED_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_BT_SETTING_EXT2_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_IBRT_TEST_MODE_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_BT_LOCAL_CLK_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_FUNC_PATCH_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_TXPWR_MODE_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_SW_RSSI_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_ECC_DATA_TEST_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_IBRT_DATA_TEST_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_SET_NWINSZ_RXGRN_TO_CMD_OPCODE 0xFCFF
|
|
#define HCI_DBG_ENABLE_SOFTBIT_CMD_OPCODE 0xFCFF
|
|
|
|
#endif // 2300, 2300p, 1400,1402,1501
|
|
|
|
extern void btdrv_poweron(uint8_t en);
|
|
extern void btdrv_hciopen(void);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|