Update README.md

Use the TWS side detection to figure out if your Left or Right; rather than relying on the master to be the right bud (not always true if you flash and pair left first).

README.md

@@ -23,3 +23,12 @@ In order to program the buds from inside of the docker container; privileged mod
 bestool write-image out/open_source/open_source.bin --port /dev/ttyACM0
 bestool write-image out/open_source/open_source.bin --port /dev/ttyACM1
 ```
+
+
+## Changelist from stock opeen source SDK
+
++ Long hold (5 ish seconds) the button on the back when buds are in the case to force a device reboot (so it can be programmed)
++ Use the resistor in the buds to pick Left/Right rather than TWS master/slave pairing
++ Pressing the button on the back while in the case no longer triggers DFU mode
++ Debugging baud rate raised to 200000 to match stock firmware
+

apps/main/apps.cpp

@@ -1396,12 +1396,17 @@ void app_key_init(void)
     }
 #endif
 }
+void app_key_reboot(APP_KEY_STATUS *status, void *param)
+{
+    TRACE(1,"%s ",__func__);
+    hal_cmu_sys_reboot();
+}
 
 void app_key_init_on_charging(void)
 {
     uint8_t i = 0;
     const APP_KEY_HANDLE  key_cfg[] = {
-        // {{APP_KEY_CODE_PWR,APP_KEY_EVENT_REPEAT},"ota function key",app_ota_key_handler, NULL},
+        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_LONGLONGPRESS},"long press reboot",app_key_reboot, NULL},
         // {{APP_KEY_CODE_PWR,APP_KEY_EVENT_CLICK},"bt function key",app_dfu_key_handler, NULL},
 #ifdef __USB_COMM__
         {{APP_KEY_CODE_PWR,APP_KEY_EVENT_LONGPRESS},"usb cdc key",app_usb_cdc_comm_key_handler, NULL},
@@ -2228,7 +2233,7 @@ int app_init(void)
     TRACE(2,"__factory_start: %p length: 0x%x", __factory_start, FACTORY_SECTION_SIZE);
 
     TRACE(0,"app_init\n");
-
+    app_tws_set_side_from_gpio();
 #ifdef __RPC_ENABLE__
 extern int rpc_service_setup(void);
     rpc_service_setup();

config/open_source/target.mk

@@ -10,7 +10,7 @@ RTOS        ?= 1
 
 #KERNEL      ?= FREERTOS
 
-
+NO_PWRKEY    = 0 # We have powerkey input
 LIBC_ROM    ?= 1
 
 export USER_SECURE_BOOT	?= 0
@@ -45,7 +45,7 @@ export CONTROLLER_DUMP_ENABLE ?= 0
 
 export CONTROLLER_MEM_LOG_ENABLE ?= 0
 
-export INTERSYS_DEBUG ?= 1
+export INTERSYS_DEBUG ?= 0
 
 export PROFILE_DEBUG ?= 0
 
@@ -209,7 +209,7 @@ CUSTOM_INFORMATION_TILE_ENABLE ?= 0
 
 INTERCONNECTION ?= 0
 
-INTERACTION ?= 0
+INTERACTION ?= 0 # Looks like Find-My-Device support?
 
 INTERACTION_FASTPAIR ?= 0
 
@@ -258,7 +258,7 @@ export A2DP_AVDTP_CP ?= 0
 
 export A2DP_DECODER_VER := 2
 
-export IBRT ?= 1
+export IBRT = 1
 
 export IBRT_SEARCH_UI ?= 1
 
@@ -350,7 +350,7 @@ AUDIO_BUFFER_SIZE := 100*1024
 endif
 
 export TRACE_BUF_SIZE := 16*1024
-export TRACE_BAUD_RATE := 921600
+export TRACE_BAUD_RATE := 2000000
 
 init-y :=
 core-y := platform/ services/ apps/ utils/cqueue/ utils/list/ services/multimedia/ utils/intersyshci/

config/open_source/tgt_hardware.c

@@ -82,7 +82,7 @@ const struct HAL_KEY_GPIOKEY_CFG_T cfg_hw_gpio_key_cfg[CFG_HW_GPIOKEY_NUM] = {
 #endif
 #endif
 */
-	{HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
+	// {HAL_KEY_CODE_FN1,{HAL_IOMUX_PIN_P1_5, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE}},
 };
 
 //bt config
@@ -104,6 +104,23 @@ uint8_t bt_addr[6] = {
 #endif
 };
 
+const struct HAL_IOMUX_PIN_FUNCTION_MAP cfg_hw_tws_channel_cfg  = {
+    HAL_IOMUX_PIN_P1_4, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE
+};
+
+bool tgt_tws_get_channel_is_right(void)
+{
+#ifdef __FIXED_TWS_EAR_SIDE__
+    return TWS_EAR_SIDE_ROLE; 
+#else
+    hal_iomux_init((struct HAL_IOMUX_PIN_FUNCTION_MAP *)&cfg_hw_tws_channel_cfg,1);
+
+  // Pinebuds pull down to 0 for right ear, but float to 1 for left ear
+  return (hal_gpio_pin_get_val(
+              (enum HAL_GPIO_PIN_T)cfg_hw_tws_channel_cfg.pin) == 0);
+#endif
+}
+
 //audio config
 //freq bands range {[0k:2.5K], [2.5k:5K], [5k:7.5K], [7.5K:10K], [10K:12.5K], [12.5K:15K], [15K:17.5K], [17.5K:20K]}
 //gain range -12~+12
@@ -181,13 +198,13 @@ const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_INT ={
 };
 */
 
-const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SDA ={
+// const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SDA ={
-	HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE
+// 	HAL_IOMUX_PIN_P2_1, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE
-};
+// };
 
-const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SCL ={
+// const struct HAL_IOMUX_PIN_FUNCTION_MAP TOUCH_I2C_SCL ={
-	HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE
+// 	HAL_IOMUX_PIN_P2_0, HAL_IOMUX_FUNC_AS_GPIO, HAL_IOMUX_PIN_VOLTAGE_VIO, HAL_IOMUX_PIN_PULLUP_ENABLE
-};
+// };
 
 
 
@@ -319,10 +336,6 @@ Filter4_A=[    134217728,   -264794659,    130668486];
         },
 */ 
 
-
-
-
-
 		.dac_gain_offset=0,
 		.adc_gain_offset=(0)*4,
     },

config/open_source/tgt_hardware.h

@@ -76,7 +76,7 @@ extern const uint16_t CFG_HW_ADCKEY_MAP_TABLE[CFG_HW_ADCKEY_NUMBER];
 #elif BES_AUDIO_DEV_Main_Board_9v0
 #define CFG_HW_GPIOKEY_NUM (6)
 #else
-#define CFG_HW_GPIOKEY_NUM (1)
+#define CFG_HW_GPIOKEY_NUM (0)
 #endif
 #endif
 

services/app_ibrt/src/app_ibrt_search_pair_ui.cpp

@@ -15,6 +15,7 @@
  ****************************************************************************/
 #include <string.h>
 #include "app_tws_ibrt_trace.h"
+#include "app_tws_if.h"
 #include "bluetooth.h"
 #include "btapp.h"
 #include "app_ibrt_ui.h"
@@ -210,22 +211,27 @@ void app_bt_manager_ibrt_role_process(const btif_event_t *Event)
                     {
                         memcpy(p_ibrt_ctrl->local_addr.address,p_remote_dev_addr->address,6);
                     }
-                        
+                    if (app_tws_is_left_side()){
-#if 0
+                        p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_LCHNL;
-                    p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_LRMERGE;
+                    }else {
-#else
-                    if(IBRT_MASTER == p_ibrt_ctrl->nv_role)
-                    {
-                        TRACE(0,"#right");
                         p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_RCHNL;
                     }
-                    else if(IBRT_SLAVE == p_ibrt_ctrl->nv_role)
-                    {
-                        TRACE(0,"#left");
-                        p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_LCHNL;
 
-                    }
+// #if 0
-#endif
+//                     p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_LRMERGE;
+// #else
+//                     if(IBRT_MASTER == p_ibrt_ctrl->nv_role)
+//                     {
+//                         TRACE(0,"#right");
+//                         p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_RCHNL;
+//                     }
+//                     else if(IBRT_SLAVE == p_ibrt_ctrl->nv_role)
+//                     {
+//                         TRACE(0,"#left");
+//                         p_ibrt_ctrl->audio_chnl_sel = A2DP_AUDIO_CHANNEL_SELECT_LCHNL;
+
+//                     }
+// #endif
                 }
 
             }

services/app_tws/src/app_tws_if.cpp

@@ -663,6 +663,7 @@ static APP_TWS_SIDE_T app_tws_side = EAR_SIDE_UNKNOWN;
 void app_tws_set_side(APP_TWS_SIDE_T side)
 {
     ASSERT((EAR_SIDE_LEFT == side) || (EAR_SIDE_RIGHT == side), "Error: setting invalid side");
+    TRACE(1,"Set TWS side to %d",side);
     app_tws_side = side;
 }
 
@@ -681,22 +682,25 @@ bool app_tws_is_unknown_side(void)
     return (app_tws_side == EAR_SIDE_UNKNOWN);
 }
 
-void app_tws_set_side_from_addr(uint8_t *addr)
+// void app_tws_set_side_from_addr(uint8_t *addr)
-{
+// {
-    ASSERT(addr, "Error: address invalid");
+//     ASSERT(addr, "Error: address invalid");
-    if (addr[0] & 0x1) {
+//     if (addr[0] & 0x1) {
-        app_tws_set_side(EAR_SIDE_RIGHT);
+//         app_tws_set_side(EAR_SIDE_RIGHT);
-        TRACE(0, "Right earbud");
+//         TRACE(0, "Right earbud");
-    } else {
+//     } else {
-        app_tws_set_side(EAR_SIDE_LEFT);
+//         app_tws_set_side(EAR_SIDE_LEFT);
-        TRACE(0, "Left earbud");
+//         TRACE(0, "Left earbud");
-    }
+//     }
-}
+// }
 
 void app_tws_set_side_from_gpio(void)
 {
-
+    if (tgt_tws_get_channel_is_right()){
+        app_tws_set_side(EAR_SIDE_RIGHT);
+    }else {
+        app_tws_set_side(EAR_SIDE_LEFT);
+    }
 }
-
 #endif