README.md

@@ -18,58 +18,17 @@ In order to program the buds from inside of the docker container; privileged mod
 ./build.sh # This will run make and build the output program. If you have weird build errors try running clean.sh or rm -rf'ing the out folder first
 
 # Now that the firmware has finished building; if there are no errors you can load it to your buds
-# You may need to take the buds out of the case, wait three seconds, place them back. This wakes them up and the programmer needs to catch this reboot.
-
-# You can try the helper script by running
-./download.sh
-
-# Or do it manually by :
-
 # Assuming that your serial ports are 0 and 1, run the following to commands to program each bud in series.
+# You may need to take the buds out of the case, wait three seconds, place them back. This wakes them up.
 bestool write-image out/open_source/open_source.bin --port /dev/ttyACM0
 bestool write-image out/open_source/open_source.bin --port /dev/ttyACM1
 ```
 
+
 ## Changelist from stock opeen source SDK
 
-- Long hold (5 ish seconds) the button on the back when buds are in the case to force a device reboot (so it can be programmed)
++ Long hold (5 ish seconds) the button on the back when buds are in the case to force a device reboot (so it can be programmed)
-- Use the resistor in the buds to pick Left/Right rather than TWS master/slave pairing
++ Use the resistor in the buds to pick Left/Right rather than TWS master/slave pairing
-- Pressing the button on the back while in the case no longer triggers DFU mode
++ Pressing the button on the back while in the case no longer triggers DFU mode
-- Debugging baud rate raised to 200000 to match stock firmware
++ Debugging baud rate raised to 200000 to match stock firmware
-- Fixed TWS operation such that putting either bud into the case correctly switches to the other bud
-- Working (mostly) audio controls using the touch button on the buds
-- Turned off showing up as a HID keyboard, as not sure _why_ you would; but it stops android nagging me about a new keyboard
 
-## Current bud tap codes
-
-### Both pods active
-
-#### Right Ear:
-
-- Single tap : Play/Pause
-- Double tap : Next track
-- Hold : Toggle ANC(Currently non functional, WIP)
-- Triple tap : Volume Up
-
-#### Left Ear:
-
-- Single tap : Play/Pause
-- Double tap : Previous track
-- Hold : Toggle ANC(Currently non functional, WIP)
-- Triple tap : Volume Down
-
-### Single pod active
-
-- Single tap : Play/Pause
-- Double tap : Next track
-- Hold : Previous track
-- Triple tap : Volume Up
-- Quad tap : Volume Down
-
-## Changing audio alerts
-The audio alerts are stored in: 
-
-`config/_default_cfg_src_/res/en/`
-
-You can convert these .txt files to .wav files by using the script `convert.sh` with the -T flag, the resulting file will be named `output.wav`.
-If you want to change the alert to a custom sound use the -W flag on your wav file and then move the resulting `SOUND.txt` file to the place you want to replace (eg. `config/_default_cfg_src_/res/en/SOUND_POWER_ON.txt`)

apps/battery/app_battery.cpp

@@ -401,7 +401,6 @@ int app_battery_handle_process_charging(uint32_t status,  union APP_BATTERY_MSG_
         {
             TRACE(1,"FULL_CHARGING:%d", app_battery_measure.currvolt);
             app_status_indication_set(APP_STATUS_INDICATION_FULLCHARGE);
-            app_shutdown();
 #ifdef MEDIA_PLAYER_SUPPORT
 #if defined(BT_USB_AUDIO_DUAL_MODE) || defined(IBRT)
 #else

apps/main/apps.cpp

@@ -786,6 +786,21 @@ void app_bt_key_enter_nosignal_mode(APP_KEY_STATUS *status, void *param)
     }
 }
 
+void app_bt_singleclick(APP_KEY_STATUS *status, void *param)
+{
+    TRACE(3,"%s %d,%d",__func__, status->code, status->event);
+}
+
+void app_bt_doubleclick(APP_KEY_STATUS *status, void *param)
+{
+    TRACE(3,"%s %d,%d",__func__, status->code, status->event);
+}
+
+void app_power_off(APP_KEY_STATUS *status, void *param)
+{
+    TRACE(0,"app_power_off\n");
+}
+
 extern "C" void OS_NotifyEvm(void);
 
 #define PRESS_KEY_TO_ENTER_OTA_INTERVEL    (15000)          // press key 15s enter to ota
@@ -1354,190 +1369,37 @@ void app_latency_switch_key_handler(void)
 	} 
 }
 
-
+void app_bt_function_key(APP_KEY_STATUS *status, void *param)
-/*
- * handling of touch events when the devices are turned on
-
- * Both pods active:
-
- * Right Ear:
- * Single tap : Play/Pause
- * Double tap : Next track
- * Hold       : ANC on/off
- * Triple tap : Volume Up
- * 
- * Left Ear:
- * Single tap : Play/Pause
- * Double tap : Previous track
- * Hold       : ANC on/off
- * Triple tap : Volume Down
- 
- * Single pod active:
-
- * Single tap : Play/Pause
- * Double tap : Next track
- * Hold       : Previous track
- * Triple tap : Volume Up
- * Quad   tap : Volume Down
- 
-  
-  
- * We use app_ibrt_if_start_user_action for handling actions, as this will apply locally if we are link master
- * OR send it over the link to the other bud if we are not
-*/
-
-void send_vol_up(void){
-    uint8_t action[] = {IBRT_ACTION_LOCAL_VOLUP};
-    app_ibrt_if_start_user_action(action, sizeof(action));
-}
-void send_play_pause(void){
-    if (app_bt_device.a2dp_play_pause_flag!=0) {
-        uint8_t action[] = {IBRT_ACTION_PAUSE};
-        app_ibrt_if_start_user_action(action, sizeof(action));
-    }else {
-        uint8_t action[] = {IBRT_ACTION_PLAY};
-        app_ibrt_if_start_user_action(action, sizeof(action));
-    }
-}
-void send_vol_down(void){
-    uint8_t action[] = {IBRT_ACTION_LOCAL_VOLDN};
-    app_ibrt_if_start_user_action(action, sizeof(action));
-}
-
-void send_next_track(void){
-    uint8_t action[] = {IBRT_ACTION_FORWARD};
-    app_ibrt_if_start_user_action(action, sizeof(action));
-}
-
-void send_prev_track(void){
-    uint8_t action[] = {IBRT_ACTION_BACKWARD};
-    app_ibrt_if_start_user_action(action, sizeof(action));
-}
-void app_key_single_tap(APP_KEY_STATUS *status, void *param){
-    TRACE(2,"%s event %d", __func__, status->event);
-
-    if (!app_tws_ibrt_tws_link_connected()){
-        //No other bud paired
-        TRACE(0,"Handling %s in single bud mode",__func__);
-        send_play_pause();
-    }else {
-        //Bud's are working as a pair
-        if (app_tws_is_left_side()){
-            TRACE(0,"Handling %s as left bud",__func__);
-            //Lefty
-            send_play_pause();
-        }else {
-            TRACE(0,"Handling %s as right bud",__func__);
-            //Righty
-            send_play_pause();
-        }
-    }
-
-}
-void app_key_double_tap(APP_KEY_STATUS *status, void *param){
-    TRACE(2,"%s event %d", __func__, status->event);
-
-    if (!app_tws_ibrt_tws_link_connected()){
-        //No other bud paired
-        TRACE(0,"Handling %s in single bud mode",__func__);
-        send_next_track();
-    }else {
-        //Bud's are working as a pair
-        if (app_tws_is_left_side()){
-            TRACE(0,"Handling %s as left bud",__func__);
-            //Lefty
-            send_prev_track();
-        }else {
-            TRACE(0,"Handling %s as right bud",__func__);
-            //Righty
-            send_next_track();
-        }
-    }
-
-}
-
-
-void app_key_triple_tap(APP_KEY_STATUS *status, void *param){
-    TRACE(2,"%s event %d", __func__, status->event);
-
-    if (!app_tws_ibrt_tws_link_connected()){
-        //No other bud paired
-        TRACE(0,"Handling %s in single bud mode",__func__);
-        send_vol_up();
-    }else {
-        //Bud's are working as a pair
-        if (app_tws_is_left_side()){
-            TRACE(0,"Handling %s as left bud",__func__);
-            //Lefty
-            send_vol_down();
-        }else {
-            TRACE(0,"Handling %s as right bud",__func__);
-            //Righty
-            send_vol_up();
-        }
-    }
-
-}
-void app_key_quad_tap(APP_KEY_STATUS *status, void *param){
-    TRACE(2,"%s event %d", __func__, status->event);
-
-    if (!app_tws_ibrt_tws_link_connected()){
-        //No other bud paired
-        TRACE(0,"Handling %s in single bud mode",__func__);
-        send_vol_down();
-    }else {
-        //Bud's are working as a pair
-        if (app_tws_is_left_side()){
-            TRACE(0,"Handling %s as left bud",__func__);
-            //Lefty
-        }else {
-            TRACE(0,"Handling %s as right bud",__func__);
-            //Righty
-        }
-    }
-}
-
-void app_key_long_press_down(APP_KEY_STATUS *status, void *param)
 {
     TRACE(2,"%s event %d", __func__, status->event);
-
+     bt_key_send(status);
-    if (!app_tws_ibrt_tws_link_connected()){
-        //No other bud paired
-        TRACE(0,"Handling %s in single bud mode",__func__);
-        send_prev_track();
-    }else {
-        //Bud's are working as a pair
-       app_anc_key(status,param);
 }
-}
-
-
-
-void app_key_reboot(APP_KEY_STATUS *status, void *param)
-{
-    TRACE(1,"%s ",__func__);
-    hal_cmu_sys_reboot();
-}
-
 
 void app_key_init(void)
 {
+#if defined(IBRT_TESTMODE)
+    app_ibrt_ui_test_key_init();
+#else
     uint8_t i = 0;
     TRACE(1,"%s",__func__);
 
     const APP_KEY_HANDLE  key_cfg[] = {
-        
+        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_CLICK},"bt function key",app_bt_function_key, NULL},
-        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_CLICK},"",app_key_single_tap, NULL},
+        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_DOUBLECLICK},"bt function key",app_bt_function_key, NULL},
-        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_DOUBLECLICK},"",app_key_double_tap, NULL},
+        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_LONGPRESS},"bt function key",app_bt_function_key, NULL},
-        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_TRIPLECLICK},"",app_key_triple_tap, NULL},
+        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_TRIPLECLICK},"bt anc key",app_anc_key, NULL},
-        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_ULTRACLICK},"",app_key_quad_tap, NULL},
-        {{APP_KEY_CODE_PWR,APP_KEY_EVENT_LONGPRESS},"",app_key_long_press_down, NULL},
     };
 
     app_key_handle_clear();
     for (i=0; i<(sizeof(key_cfg)/sizeof(APP_KEY_HANDLE)); i++){
         app_key_handle_registration(&key_cfg[i]);
     }
+#endif
+}
+void app_key_reboot(APP_KEY_STATUS *status, void *param)
+{
+    TRACE(1,"%s ",__func__);
+    hal_cmu_sys_reboot();
 }
 
 void app_key_init_on_charging(void)
@@ -1924,8 +1786,7 @@ int app_deinit(int deinit_case)
 {
     int nRet = 0;
     TRACE(2,"%s case:%d",__func__, deinit_case);
-    app_tws_if_trigger_role_switch();
+
-    osDelay(200); // This is a hack; a hackkitttyy hack. To wait for the tws exchange to occur
 #ifdef WL_DET
     app_mic_alg_audioloop(false,APP_SYSFREQ_78M);
 #endif

config/_default_cfg_src_/app_status_ind.c

@@ -97,14 +97,14 @@ int app_status_indication_set(APP_STATUS_INDICATION_T status)
     struct APP_PWL_CFG_T cfg0;
     struct APP_PWL_CFG_T cfg1;
 
+    TRACE(2,"%s %d",__func__, status);
+
     if (app_status == status)
         return 0;
 
     if (app_status_ind_filter == status)
         return 0;
 
-    TRACE(2,"%s %d",__func__, status);
-
     app_status = status;
     memset(&cfg0, 0, sizeof(struct APP_PWL_CFG_T));
     memset(&cfg1, 0, sizeof(struct APP_PWL_CFG_T));
@@ -160,7 +160,6 @@ int app_status_indication_set(APP_STATUS_INDICATION_T status)
             app_pwl_start(APP_PWL_ID_1);
             break;
         case APP_STATUS_INDICATION_CONNECTING:
-            // LED's alternating Red/Blue
             cfg0.part[0].level = 1;
             cfg0.part[0].time = (300);
             cfg0.part[1].level = 0;
@@ -213,32 +212,25 @@ int app_status_indication_set(APP_STATUS_INDICATION_T status)
             app_pwl_start(APP_PWL_ID_1);
             break;
         case APP_STATUS_INDICATION_FULLCHARGE:
-            cfg0.part[0].level = 0;
+            cfg0.part[0].level = 1;
             cfg0.part[0].time = (5000);
             cfg0.parttotal = 1;
             cfg0.startlevel = 1;
-            cfg0.periodic = false;
+            cfg0.periodic = true;
             app_pwl_setup(APP_PWL_ID_0, &cfg0);
             app_pwl_start(APP_PWL_ID_0);
-            app_pwl_setup(APP_PWL_ID_1, &cfg0);
-            app_pwl_start(APP_PWL_ID_1);
             break;
         case APP_STATUS_INDICATION_POWEROFF:
-            cfg1.part[0].level = 0;
+            cfg1.part[0].level = 1;
-            cfg1.part[0].time = (100);
+            cfg1.part[0].time = (3000);
-            cfg1.parttotal = 1;
+            cfg1.part[1].level = 0;
+            cfg1.part[1].time = (200);
+            cfg1.parttotal = 2;
             cfg1.startlevel = 1;
             cfg1.periodic = false;
-            cfg0.part[0].level = 0;
-            cfg0.part[0].time = (100);
-            cfg0.parttotal = 1;
-            cfg0.startlevel = 1;
-            cfg0.periodic = false;
 
             app_pwl_setup(APP_PWL_ID_1, &cfg1);
             app_pwl_start(APP_PWL_ID_1);
-            app_pwl_setup(APP_PWL_ID_0, &cfg0);
-            app_pwl_start(APP_PWL_ID_0);
             break;
         case APP_STATUS_INDICATION_CHARGENEED:
             cfg1.part[0].level = 1;

config/open_source/target.mk

@@ -315,7 +315,7 @@ export TX_IQ_CAL ?= 0
 
 export BT_XTAL_SYNC ?= 1
 
-export BTADDR_FOR_DEBUG ?= 0
+export BTADDR_FOR_DEBUG ?= 1
 
 export POWERKEY_I2C_SWITCH ?=0
 
@@ -331,7 +331,7 @@ export DUMP_NORMAL_LOG ?= 0
 
 SUPPORT_BATTERY_REPORT ?= 1
 
-SUPPORT_HF_INDICATORS ?= 1
+SUPPORT_HF_INDICATORS ?= 0
 
 SUPPORT_SIRI ?= 1
 
@@ -425,7 +425,7 @@ KBUILD_CFLAGS +=
 
 LIB_LDFLAGS += -lstdc++ -lsupc++
 
-export BTIF_HID_DEVICE ?= 0
+export BTIF_HID_DEVICE ?= 1
 ifeq ($(BTIF_HID_DEVICE),1)
 KBUILD_CPPFLAGS += -DBTIF_HID_DEVICE
 endif

config/open_source/tgt_hardware.c

@@ -988,21 +988,13 @@ const struct_anc_cfg * anc_coef_list_44p1k[ANC_COEF_LIST_NUM] = {
 const IIR_CFG_T audio_eq_sw_iir_cfg = {
     .gain0 = 0,
     .gain1 = 0,
-    .num = 13,
+    .num = 5,
     .param = {
-        {IIR_TYPE_PEAK, -2.2,   10,   2},
+        {IIR_TYPE_PEAK, .0,   200,   2},
-        {IIR_TYPE_PEAK, 5.1,   21,   2},
+        {IIR_TYPE_PEAK, .0,   600,  2},
-        {IIR_TYPE_PEAK, 0.9,   42,   2},
+        {IIR_TYPE_PEAK, .0,   2000.0, 2},
-        {IIR_TYPE_PEAK, -6,   83,   2},
+        {IIR_TYPE_PEAK, .0,  6000.0, 2},
-        {IIR_TYPE_PEAK, -6,   166,   2},
+        {IIR_TYPE_PEAK, .0,  12000.0, 2}            
-        {IIR_TYPE_PEAK, -4.6,   333,   2},
-        {IIR_TYPE_PEAK, -2,   577,  2},
-        {IIR_TYPE_PEAK, -0.7,   1000, 2},
-        {IIR_TYPE_PEAK, 1.7,  2000, 2},
-        {IIR_TYPE_PEAK, 3.2,  4000, 2},
-        {IIR_TYPE_PEAK, -5.6,  8000, 2},
-        {IIR_TYPE_PEAK, 10.1,   16000,   2},
-        {IIR_TYPE_PEAK, 5.9,   20000,   2},
     }
 };
 
@@ -1045,21 +1037,59 @@ const FIR_CFG_T * const audio_eq_hw_fir_cfg_list[EQ_HW_FIR_LIST_NUM]={
 };
 
 //hardware dac iir eq
-const IIR_CFG_T audio_eq_hw_dac_iir_cfg = audio_eq_sw_iir_cfg;
+const IIR_CFG_T audio_eq_hw_dac_iir_cfg = {
+    .gain0 = 0,
+    .gain1 = 0,
+    .num = 8,
+    .param = {
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+        {IIR_TYPE_PEAK, 0,   1000.0,   0.7},
+    }
+};
 
 const IIR_CFG_T * const POSSIBLY_UNUSED audio_eq_hw_dac_iir_cfg_list[EQ_HW_DAC_IIR_LIST_NUM]={
     &audio_eq_hw_dac_iir_cfg,
 };
 
 //hardware dac iir eq
-const IIR_CFG_T audio_eq_hw_adc_iir_adc_cfg = audio_eq_sw_iir_cfg;
+const IIR_CFG_T audio_eq_hw_adc_iir_adc_cfg = {
+    .gain0 = 0,
+    .gain1 = 0,
+    .num = 1,
+    .param = {
+        {IIR_TYPE_PEAK, 0.0,   1000.0,   0.7},
+    }
+};
 
 const IIR_CFG_T * const POSSIBLY_UNUSED audio_eq_hw_adc_iir_cfg_list[EQ_HW_ADC_IIR_LIST_NUM]={
     &audio_eq_hw_adc_iir_adc_cfg,
 };
 
+
+
 //hardware iir eq
-const IIR_CFG_T audio_eq_hw_iir_cfg = audio_eq_sw_iir_cfg;
+const IIR_CFG_T audio_eq_hw_iir_cfg = {
+    .gain0 = 0,
+    .gain1 = 0,
+    .num = 8,
+    .param = {
+        {IIR_TYPE_PEAK, -10.1,   100.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   400.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   700.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   1000.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   3000.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   5000.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   7000.0,   7},
+        {IIR_TYPE_PEAK, -10.1,   9000.0,   7},
+            
+    }
+};
 
 const IIR_CFG_T * const POSSIBLY_UNUSED audio_eq_hw_iir_cfg_list[EQ_HW_IIR_LIST_NUM]={
     &audio_eq_hw_iir_cfg,

convert.sh

@@ -1,26 +0,0 @@
-#!/bin/sh
-txt_to_wav() {
-  xxd -r -p $args > out.raw
-  ffmpeg -f sbc -ac 1 -i ./out.raw output.wav
-  rm ./out.raw
-}
-
-wav_to_txt() {
-  ffmpeg -i $args -f sbc -ac 16000 -ac 1 -map_metadata -1 out.raw
-  xxd -i ./out.raw | head -n -2 \
-    | tail -n +2 | sed 's/ //g' \
-    | tr --delete '\n' \
-    | sed 's/,/\,\n/16; P; D' > SOUND.txt
-  rm ./out.raw
-}
-
-[ ${1} = "-T" ] || [ ${1} = "--txt-to-wav" ] && shift 1 && args=$@ && txt_to_wav && exit
-[ ${1} = "-W" ] || [ ${1} = "--wav-to-txt" ] && shift 1 && args=$@ &&  wav_to_txt && exit
-echo "
-Sound format converter:
-Usage:
-  ./convert.sh [option] [input-file]
-Options:
--T or --txt-to-wav   Converts the text file to a wav audio file (output.wav)
--W or --wav-to-txt Converts a wav file to a file readable by the pinebuds firmware (SOUND.txt)
-"

download.sh

@@ -1,15 +1,7 @@
 #! /bin/bash
 
-num=$(ls -l /dev/ttyACM* | rev | cut -c 1)
+num=$(ls -l /dev/ttyUSB* | rev | cut -c 1)
+#num=3
 echo com is:$num
-splitPorts=($num)
+sudo -S dldtool -c $num -f out/open_source/open_source.bin
-echo "This tool assumes your buds are the only thing connected and are enumerated {right,left} order. YMMV"
+sudo minicom port$num
-echo "Right bud is at ${splitPorts[0]}"
-echo "Left bud is at ${splitPorts[1]}"
-
-echo "Please disconnect and reconnect the bud on the right"
-
-bestool write-image out/open_source/open_source.bin --port /dev/ttyACM${splitPorts[0]}
-
-echo "Please disconnect and reconnect the bud on the left"
-bestool write-image out/open_source/open_source.bin --port /dev/ttyACM${splitPorts[1]}

platform/hal/hal_aud.h

@@ -223,12 +223,12 @@ enum AUD_IO_PATH_T {
     AUD_IO_PATH_NULL = 0,
 
     // Input path
-    AUD_INPUT_PATH_MAINMIC, // Main User Mic
+    AUD_INPUT_PATH_MAINMIC,
-    AUD_INPUT_PATH_VADMIC, // Voice Activity Detection
+    AUD_INPUT_PATH_VADMIC,
-    AUD_INPUT_PATH_ASRMIC, // Ambient Sound Reduction? (? Is this the external mic?)
+    AUD_INPUT_PATH_ASRMIC,
     AUD_INPUT_PATH_LINEIN,
     AUD_INPUT_PATH_NTMIC,
-    AUD_INPUT_PATH_ANC_WNR, // Wind Noise Reduction
+    AUD_INPUT_PATH_ANC_WNR,
     AUD_INPUT_PATH_USBAUDIO,
 #ifdef __ANC_ASSIST__
     AUD_INPUT_PATH_AF_ANC,

platform/hal/hal_key.h

@@ -45,31 +45,31 @@ enum HAL_KEY_CODE_T {
 
 enum HAL_KEY_EVENT_T {
     HAL_KEY_EVENT_NONE = 0,
-    HAL_KEY_EVENT_DOWN,                 // 1
+    HAL_KEY_EVENT_DOWN,
-    HAL_KEY_EVENT_FIRST_DOWN,           // 2
+    HAL_KEY_EVENT_FIRST_DOWN,
-    HAL_KEY_EVENT_CONTINUED_DOWN,       // 3 
+    HAL_KEY_EVENT_CONTINUED_DOWN,
-    HAL_KEY_EVENT_UP,                   // 4
+    HAL_KEY_EVENT_UP,
-    HAL_KEY_EVENT_UP_AFTER_LONGPRESS,   // 5
+    HAL_KEY_EVENT_UP_AFTER_LONGPRESS,
-    HAL_KEY_EVENT_LONGPRESS,            // 6
+    HAL_KEY_EVENT_LONGPRESS,
-    HAL_KEY_EVENT_LONGLONGPRESS,        // 7
+    HAL_KEY_EVENT_LONGLONGPRESS,
-    HAL_KEY_EVENT_CLICK,                // 8
+    HAL_KEY_EVENT_CLICK,
-    HAL_KEY_EVENT_DOUBLECLICK,          // 9
+    HAL_KEY_EVENT_DOUBLECLICK,
-    HAL_KEY_EVENT_TRIPLECLICK,          // 10
+    HAL_KEY_EVENT_TRIPLECLICK,
-    HAL_KEY_EVENT_ULTRACLICK,           // 11
+    HAL_KEY_EVENT_ULTRACLICK,
-    HAL_KEY_EVENT_RAMPAGECLICK,         // 12
+    HAL_KEY_EVENT_RAMPAGECLICK,
-    HAL_KEY_EVENT_SIXTHCLICK,           // 13
+    HAL_KEY_EVENT_SIXTHCLICK,
-    HAL_KEY_EVENT_SEVENTHCLICK,         // 14
+    HAL_KEY_EVENT_SEVENTHCLICK,
-    HAL_KEY_EVENT_EIGHTHCLICK,          // 15
+    HAL_KEY_EVENT_EIGHTHCLICK,
-    HAL_KEY_EVENT_NINETHCLICK,          // 16
+    HAL_KEY_EVENT_NINETHCLICK,
-    HAL_KEY_EVENT_TENTHCLICK,           // 17
+    HAL_KEY_EVENT_TENTHCLICK,
-    HAL_KEY_EVENT_REPEAT,               // 18
+    HAL_KEY_EVENT_REPEAT,
-    HAL_KEY_EVENT_GROUPKEY_DOWN,        // 19
+    HAL_KEY_EVENT_GROUPKEY_DOWN,
-    HAL_KEY_EVENT_GROUPKEY_REPEAT,      // 20
+    HAL_KEY_EVENT_GROUPKEY_REPEAT,
-    HAL_KEY_EVENT_INITDOWN,             // 21
+    HAL_KEY_EVENT_INITDOWN,
-    HAL_KEY_EVENT_INITUP,               // 22
+    HAL_KEY_EVENT_INITUP,
-    HAL_KEY_EVENT_INITLONGPRESS,        // 23
+    HAL_KEY_EVENT_INITLONGPRESS,
-    HAL_KEY_EVENT_INITLONGLONGPRESS,    // 24
+    HAL_KEY_EVENT_INITLONGLONGPRESS,
-    HAL_KEY_EVENT_INITFINISHED,         // 25
+    HAL_KEY_EVENT_INITFINISHED,
 
     HAL_KEY_EVENT_NUM,
 };

services/bt_app/app_bt.cpp

@@ -4840,17 +4840,6 @@ uint32_t app_bt_restore_hid_app_ctx(uint8_t *buf)
 
     return offset;
 }
-#else 
-uint32_t app_bt_restore_hid_app_ctx(uint8_t *buf)
-{return  4;}
-uint32_t app_bt_save_hid_app_ctx(uint8_t *buf)
-{
-    buf[0]=0;
-    buf[1]=0;
-    buf[2]=0;
-    buf[3]=0;
-    return  4;}
-
 #endif
 #endif /* ENHANCED_STACK */
 

services/bt_app/app_bt.h

@@ -229,8 +229,10 @@ uint32_t app_bt_restore_spp_app_ctx(uint8_t *buf, uint32_t buf_len, uint32_t app
 uint32_t app_bt_save_map_app_ctx(btif_remote_device_t *rem_dev, uint8_t *buf, uint32_t buf_len);
 uint32_t app_bt_restore_map_app_ctx(uint8_t *buf, uint32_t buf_len);
 #endif
-uint32_t app_bt_restore_hid_app_ctx(uint8_t *buf);
+#ifdef BTIF_HID_DEVICE
 uint32_t app_bt_save_hid_app_ctx(uint8_t *buf);
+uint32_t app_bt_restore_hid_app_ctx(uint8_t *buf);
+#endif
 #endif /* ENHANCED_STACK */
 #endif