commit
cede4b1c01
1 changed files with 3 additions and 3 deletions
|
@ -5,7 +5,7 @@ The docker image will build bestool for you first, then drop you into the dev co
|
|||
|
||||
## Usage
|
||||
|
||||
To use this setup to build & flash your pine buds you will need a system with docker setup at the minimum.
|
||||
To use this setup to build & flash your PineBuds you will need a system with docker setup at the minimum.
|
||||
Docker is used to (1) make this all much more reprodicible and easier to debug and (2) so that we dont mess with your host system at all.
|
||||
In order to program the buds from inside of the docker container; privileged mode is used. So do be a tad more careful than usual.
|
||||
|
||||
|
@ -34,12 +34,12 @@ bestool write-image out/open_source/open_source.bin --port /dev/ttyACM0
|
|||
bestool write-image out/open_source/open_source.bin --port /dev/ttyACM1
|
||||
```
|
||||
|
||||
## Changelist from stock opeen source SDK
|
||||
## Changelist from stock open source SDK
|
||||
|
||||
- Long hold (5 ish seconds) the button on the back when buds are in the case to force a device reboot (so it can be programmed)
|
||||
- Use the resistor in the buds to pick Left/Right rather than TWS master/slave pairing
|
||||
- Pressing the button on the back while in the case no longer triggers DFU mode
|
||||
- Debugging baud rate raised to 200000 to match stock firmware
|
||||
- Debugging baud rate raised to 2000000 to match stock firmware
|
||||
- Fixed TWS operation such that putting either bud into the case correctly switches to the other bud
|
||||
- Working (mostly) audio controls using the touch button on the buds
|
||||
- Turned off showing up as a HID keyboard, as not sure _why_ you would; but it stops android nagging me about a new keyboard
|
||||
|
|
Loading…
Reference in a new issue