Apply changes suggested by shellcheck

backup.sh

@@ -1,21 +1,20 @@
-#! /bin/bash
+#!/bin/bash
 
 BKPPATH="firmware-backups"
 
-mkdir -p $BKPPATH
+mkdir -p "$BKPPATH"
 
 NOW=$(date +%s)
 
 num=$(ls -l /dev/ttyACM* | rev | cut -c 1)
-echo com is:$num
-splitPorts=($num)
+echo com is: "$num"
+mapfile -t splitPorts <<< "$num"
 echo "This tool assumes your buds are the only thing connected and are enumerated {right,left} order. YMMV"
 echo "Right bud is at ${splitPorts[0]}"
 echo "Left bud is at ${splitPorts[1]}"
 
 echo "Please disconnect and reconnect the bud on the right"
-
-bestool read-image --port /dev/ttyACM${splitPorts[0]} $BKPPATH/firmware-$NOW-${splitPorts[0]}.bin.bkp
+bestool read-image --port "/dev/ttyACM${splitPorts[0]}" "${BKPPATH}/firmware-${NOW}-${splitPorts[0]}.bin.bkp"
 
 echo "Please disconnect and reconnect the bud on the left"
-bestool read-image --port /dev/ttyACM${splitPorts[1]} $BKPPATH/firmware-$NOW-${splitPorts[1]}.bin.bkp
+bestool read-image --port "/dev/ttyACM${splitPorts[1]}" "${BKPPATH}/firmware-${NOW}-${splitPorts[1]}.bin.bkp"

build.sh

@@ -1,10 +1,8 @@
-#!/bin/bash
+#!/bin/sh
 
-make -j T=open_source DEBUG=1 >log.txt 2>&1
-
-if [ $? -eq 0 ]; then
+if make -j "$(nproc)" T=open_source DEBUG=1 >log.txt 2>&1; then
 	echo "build success"
 else
 	echo "build failed and call log.txt"
-	cat log.txt | grep "error:*"
+	grep "error:" log.txt
 fi

download.sh

@@ -1,15 +1,14 @@
-#! /bin/bash
+#!/bin/bash
 
 num=$(ls -l /dev/ttyACM* | rev | cut -c 1)
-echo com is:$num
-splitPorts=($num)
+echo com is: "$num"
+mapfile -t splitPorts <<< "$num"
 echo "This tool assumes your buds are the only thing connected and are enumerated {right,left} order. YMMV"
 echo "Right bud is at ${splitPorts[0]}"
 echo "Left bud is at ${splitPorts[1]}"
 
 echo "Please disconnect and reconnect the bud on the right"
-
-bestool write-image out/open_source/open_source.bin --port /dev/ttyACM${splitPorts[0]}
+bestool write-image out/open_source/open_source.bin --port "/dev/ttyACM${splitPorts[0]}"
 
 echo "Please disconnect and reconnect the bud on the left"
-bestool write-image out/open_source/open_source.bin --port /dev/ttyACM${splitPorts[1]}
+bestool write-image out/open_source/open_source.bin --port "/dev/ttyACM${splitPorts[1]}"

uart_log.sh

@@ -1,6 +1,5 @@
 #! /bin/bash
 
 num=$(ls -l /dev/ttyUSB* | rev | cut -c 1)
-#num=1
-echo $num
-sudo minicom port$num
+echo "$num"
+sudo minicom "port$num"