pinebuds/platform/cmsis/DSP_Lib/BasicMathFunctions/arm_shift_q7.c

/* ----------------------------------------------------------------------
 * Project:      CMSIS DSP Library
 * Title:        arm_shift_q7.c
 * Description:  Processing function for the Q7 Shifting
 *
 * $Date:        18. March 2019
 * $Revision:    V1.6.0
 *
 * Target Processor: Cortex-M cores
 * -------------------------------------------------------------------- */
/*
 * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "arm_math.h"

/**
  @ingroup groupMath
 */

/**
  @addtogroup BasicShift
  @{
 */

/**
  @brief         Shifts the elements of a Q7 vector a specified number of bits
  @param[in]     pSrc       points to the input vector
  @param[in]     shiftBits  number of bits to shift.  A positive value shifts
  left; a negative value shifts right.
  @param[out]    pDst       points to the output vector
  @param[in]     blockSize  number of samples in each vector
  @return        none

  @par           onditions for optimum performance
                   Input and output buffers should be aligned by 32-bit
  @par           Scaling and Overflow Behavior
                   The function uses saturating arithmetic.
                   Results outside of the allowable Q7 range [0x80 0x7F] are
  saturated.
 */

void arm_shift_q7(const q7_t *pSrc, int8_t shiftBits, q7_t *pDst,
                  uint32_t blockSize) {
  uint32_t blkCnt;                   /* Loop counter */
  uint8_t sign = (shiftBits & 0x80); /* Sign of shiftBits */

#if defined(ARM_MATH_LOOPUNROLL)

#if defined(ARM_MATH_DSP)
  q7_t in1, in2, in3, in4; /* Temporary input variables */
#endif

  /* Loop unrolling: Compute 4 outputs at a time */
  blkCnt = blockSize >> 2U;

  /* If the shift value is positive then do right shift else left shift */
  if (sign == 0U) {
    while (blkCnt > 0U) {
      /* C = A << shiftBits */

#if defined(ARM_MATH_DSP)
      /* Read 4 inputs */
      in1 = *pSrc++;
      in2 = *pSrc++;
      in3 = *pSrc++;
      in4 = *pSrc++;

      /* Pack and store result in destination buffer (in single write) */
      write_q7x4_ia(&pDst, __PACKq7(__SSAT((in1 << shiftBits), 8),
                                    __SSAT((in2 << shiftBits), 8),
                                    __SSAT((in3 << shiftBits), 8),
                                    __SSAT((in4 << shiftBits), 8)));
#else
      *pDst++ = (q7_t)__SSAT(((q15_t)*pSrc++ << shiftBits), 8);
      *pDst++ = (q7_t)__SSAT(((q15_t)*pSrc++ << shiftBits), 8);
      *pDst++ = (q7_t)__SSAT(((q15_t)*pSrc++ << shiftBits), 8);
      *pDst++ = (q7_t)__SSAT(((q15_t)*pSrc++ << shiftBits), 8);
#endif

      /* Decrement loop counter */
      blkCnt--;
    }
  } else {
    while (blkCnt > 0U) {
      /* C = A >> shiftBits */

#if defined(ARM_MATH_DSP)
      /* Read 4 inputs */
      in1 = *pSrc++;
      in2 = *pSrc++;
      in3 = *pSrc++;
      in4 = *pSrc++;

      /* Pack and store result in destination buffer (in single write) */
      write_q7x4_ia(&pDst, __PACKq7((in1 >> -shiftBits), (in2 >> -shiftBits),
                                    (in3 >> -shiftBits), (in4 >> -shiftBits)));
#else
      *pDst++ = (*pSrc++ >> -shiftBits);
      *pDst++ = (*pSrc++ >> -shiftBits);
      *pDst++ = (*pSrc++ >> -shiftBits);
      *pDst++ = (*pSrc++ >> -shiftBits);
#endif

      /* Decrement loop counter */
      blkCnt--;
    }
  }

  /* Loop unrolling: Compute remaining outputs */
  blkCnt = blockSize % 0x4U;

#else

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

#endif /* #if defined (ARM_MATH_LOOPUNROLL) */

  /* If the shift value is positive then do right shift else left shift */
  if (sign == 0U) {
    while (blkCnt > 0U) {
      /* C = A << shiftBits */

      /* Shift input and store result in destination buffer. */
      *pDst++ = (q7_t)__SSAT(((q15_t)*pSrc++ << shiftBits), 8);

      /* Decrement loop counter */
      blkCnt--;
    }
  } else {
    while (blkCnt > 0U) {
      /* C = A >> shiftBits */

      /* Shift input and store result in destination buffer. */
      *pDst++ = (*pSrc++ >> -shiftBits);

      /* Decrement loop counter */
      blkCnt--;
    }
  }
}

/**
  @} end of BasicShift group
 */