pinebuds/services/bt_if_enhanced/inc/me_api.h

/***************************************************************************
 *
 * Copyright 2015-2019 BES.
 * All rights reserved. All unpublished rights reserved.
 *
 * No part of this work may be used or reproduced in any form or by any
 * means, or stored in a database or retrieval system, without prior written
 * permission of BES.
 *
 * Use of this work is governed by a license granted by BES.
 * This work contains confidential and proprietary information of
 * BES. which is protected by copyright, trade secret,
 * trademark and other intellectual property rights.
 *
 ****************************************************************************/

#ifndef __ME_API__H__
#define __ME_API__H__

#include "bluetooth.h"
#include <stdbool.h>
#include <stdint.h>

typedef uint8_t btif_event_type_t;

#if defined(BTIF_HCI_HOST_FLOW_CONTROL) && defined(__IAG_BLE_INCLUDE__)
#define BTIF_BTEVENT_CONNECT_CPMPLETE 1
#endif /*  */

#define BTIF_BTEVENT_INQUIRY_RESULT 1

#define BTIF_BTEVENT_INQUIRY_COMPLETE 2

#define BTIF_BTEVENT_INQUIRY_CANCELED 3

#define BTIF_BTEVENT_LINK_CONNECT_IND 4

#define BTIF_BTEVENT_SCO_CONNECT_IND 5

#define BTIF_BTEVENT_LINK_DISCONNECT 6

#define BTIF_BTEVENT_LINK_CONNECT_CNF 7

#define BTIF_BTEVENT_LINK_CON_RESTRICT 8

#define BTIF_BTEVENT_MODE_CHANGE 9

#define BTIF_BTEVENT_ACCESSIBLE_CHANGE 10

#define BTIF_BTEVENT_AUTHENTICATED 11

#define BTIF_BTEVENT_ENCRYPTION_CHANGE 12

#define BTIF_BTEVENT_SECURITY_CHANGE 13

#define BTIF_BTEVENT_ROLE_CHANGE 14

#define BTIF_BTEVENT_SCO_DISCONNECT 15

#define BTIF_BTEVENT_SCO_CONNECT_CNF 16

#define BTIF_BTEVENT_SIMPLE_PAIRING_COMPLETE 17

#define BTIF_BTEVENT_REMOTE_FEATURES 18

#define BTIF_BTEVENT_REM_HOST_FEATURES 19

#define BTIF_BTEVENT_LINK_SUPERV_TIMEOUT_CHANGED 20

#define BTIF_BTEVENT_SET_SNIFF_SUBRATING_PARMS_CNF 21

#define BTIF_BTEVENT_SNIFF_SUBRATE_INFO 22

#define BTIF_BTEVENT_SET_INQUIRY_MODE_CNF 23

#define BTIF_BTEVENT_SET_INQ_TX_PWR_LVL_CNF 24

#define BTIF_BTEVENT_SET_EXT_INQUIRY_RESP_CNF 25

#define BTIF_BTEVENT_SET_ERR_DATA_REPORTING_CNF 26

#define BTIF_BTEVENT_KEY_PRESSED 27

#define BTIF_BTEVENT_QOS_SETUP_COMPLETE 28

#ifdef __TWS_RECONNECT_USE_BLE__
#define BTIF_BTEVENT_TWS_BLE_ADV_REPORT_EVENT 29
#endif /*  */

/**  an ACL connection has received an internal data transmit
 *  request while it is in hold, park or sniff mode. The data will still be
 *  passed to the radio in park and sniff modes. However, hold mode will
 *  block data transmit. It may be necessary to return the ACL to active
 *  mode to restore normal data transfer.
 */
#define BTIF_BTEVENT_ACL_DATA_NOT_ACTIVE 99

/*
Indicate that an ACL connection is sending or receiving data
while it is in active mode. Then, keep resetting the sniff timer.
*/
#define BTIF_BTEVENT_ACL_DATA_ACTIVE 98
/** Indicates that the HCI failed to initialize.
 */
#define BTIF_BTEVENT_HCI_INIT_ERROR 100

#define BTIF_BTEVENT_HCI_INITIALIZED 101
/** Indicates that a fatal error has occurred in the radio or the HCI transport.
 */
#define BTIF_BTEVENT_HCI_FATAL_ERROR 102

/** Indicates that the HCI has been deinitialized.
 */
#define BTIF_BTEVENT_HCI_DEINITIALIZED 103

/** Indicates that the HCI cannot be initialized.
 */
#define BTIF_BTEVENT_HCI_FAILED 104

#define BTIF_BTEVENT_HCI_COMMAND_SENT 105

/** Indicates the name of a remote device or cancellation of a name request.
 */
#define BTIF_BTEVENT_NAME_RESULT 30

#define BTIF_BTEVENT_SCO_DATA_IND 31

/** Outgoing SCO data has been sent and the packet is free for re-use by
 *  the application.
 */
#define BTIF_BTEVENT_SCO_DATA_CNF 32

#define BTIF_BTEVENT_LINK_CONNECT_REQ 33

/** Incoming link accept complete.  */
#define BTIF_BTEVENT_LINK_ACCEPT_RSP 34

/** Incoming link reject complete. . */
#define BTEVENT_LINK_REJECT_RSP 35

#define BTIF_BTEVENT_COMMAND_COMPLETE 36

#define BTIF_BTEVENT_SCO_CONNECT_REQ 37

/** Set Audio/Voice settings complete.  */
#define BTIF_BTEVENT_SCO_VSET_COMPLETE 38

/** SCO link connection process started. */
#define BTIF_BTEVENT_SCO_STARTED 39

/** Select Device operation complete, "p.select" is valid. */
#define BTIF_BTEVENT_DEVICE_SELECTED 40

/** The eSCO connection has changed. "p.scoConnect" is valid.
 */
#define BTIF_BTEVENT_SCO_CONN_CHNG 41

/* Group: Security-related events. */

/** Indicates access request is successful. "p.secToken" is valid. */
#define BTIF_BTEVENT_ACCESS_APPROVED 50

/** Indicates access request failed. "p.secToken" is valid. */
#define BTIF_BTEVENT_ACCESS_DENIED 51

/** Request authorization when "errCode" is BEC_NO_ERROR.
 *  "p.remDev" is valid.
 */
#define BTIF_BTEVENT_AUTHORIZATION_REQ 52

/** Request a Pin for pairing when "errCode" is BEC_NO_ERROR.
 *  "p.pinReq" is valid. If p.pinReq.pinLen is > 0 then SEC_SetPin()
 *  must be called in response to this event with a pin length >=
 *  p.pinReq.pinLen.
 */
#define BTIF_BTEVENT_PIN_REQ 53

/** Pairing operation is complete.
 */
#define BTIF_BTEVENT_PAIRING_COMPLETE 54

/** Authentication operation complete. "p.remDev" is valid. */
#define BTIF_BTEVENT_AUTHENTICATE_CNF 55

/** Encryption operation complete. "p.remDev" is valid. */
#define BTIF_BTEVENT_ENCRYPT_COMPLETE 56

/** Security mode 3 operation complete. "p.secMode" is valid. */
#define BTIF_BTIF_BTEVENT_SECURITY3_COMPLETE 57

/** A link key is returned. "p.bdLinkKey" is valid.  */
#define BTIF_BTEVENT_RETURN_LINK_KEYS 58

/** Out of Band data has been received from the host controller. */
#define BTIF_BTEVENT_LOCAL_OOB_DATA 59

/** Request a Pass Key for simple pairing when "errCode" is BEC_NO_ERROR. The
 *  application should call SEC_SetPassKey() to provide the passkey or reject
 *  the request, and optionally save the link key.
 */
#define BTIF_BTEVENT_PASS_KEY_REQ 60

/** Request a User Confirmation for simple pairing when "errCode" is
 *  BEC_NO_ERROR.
 */
#define BTIF_BTEVENT_CONFIRM_NUMERIC_REQ 61

#define BTIF_BTEVENT_DISPLAY_NUMERIC_IND 62

#define BTIF_BTEVENT_CONN_PACKET_TYPE_CHNG 63

#define BTIF_SDEVENT_QUERY_RSP 70

#define BTIF_SDEVENT_QUERY_ERR 71

#define BTIF_SDEVENT_QUERY_FAILED 72

#define BTIF_BTEVENT_SELECT_DEVICE_REQ 80

#define BTIF_BTEVENT_DEVICE_ADDED 81

#define BTIF_BTEVENT_DEVICE_DELETED 82

#define BTIF_BTEVENT_MAX_SLOT_CHANGED 83

#define BTIF_BTEVENT_SNIFFER_CONTROL_DONE 84

#define BTIF_BTEVENT_LINK_POLICY_CHANGED 85

#define BTIF_BTEVENT_DEFAULT_LINK_POLICY_CHANGED 86

#define BTIF_BTEVENT_BES_AUD_CONNECTED 200

#define BTIF_BTEVENT_BES_AUD_DISCONNECTED 201

#define BTIF_STACK_LINK_DISCONNECT_COMPLETE 220

typedef uint32_t btif_event_mask_t;

#define BTIF_BEM_NO_EVENTS 0x00000000
#define BTIF_BEM_INQUIRY_RESULT 0x00000001
#define BTIF_BEM_INQUIRY_COMPLETE 0x00000002
#define BTIF_BEM_INQUIRY_CANCELED 0x00000004
#define BTIF_BEM_LINK_CONNECT_IND 0x00000008
#define BTIF_BEM_SCO_CONNECT_IND 0x00000010
#define BTIF_BEM_LINK_DISCONNECT 0x00000020
#define BTIF_BEM_LINK_CONNECT_CNF 0x00000040
#define BTIF_BEM_LINK_CON_RESTRICT 0x00000080
#define BTIF_BEM_MODE_CHANGE 0x00000100
#define BTIF_BEM_ACCESSIBLE_CHANGE 0x00000200
#define BTIF_BEM_AUTHENTICATED 0x00000400
#define BTIF_BEM_ENCRYPTION_CHANGE 0x00000800
#define BTIF_BEM_SECURITY_CHANGE 0x00001000
#define BTIF_BEM_ROLE_CHANGE 0x00002000
#define BTIF_BEM_SCO_DISCONNECT 0x00004000
#define BTIF_BEM_SCO_CONNECT_CNF 0x00008000
#define BTIF_BEM_SIMPLE_PAIRING_COMPLETE 0x00010000
#define BTIF_BEM_REMOTE_FEATURES 0x00020000
#define BTIF_BEM_REM_HOST_FEATURES 0x00040000
#define BTIF_BEM_LINK_SUPERV_TIMEOUT_CHANGED 0x00080000
#define BTIF_BEM_SET_SNIFF_SUBR_PARMS 0x00100000
#define BTIF_BEM_SNIFF_SUBRATE_INFO 0x00200000
#define BTIF_BEM_SET_INQ_MODE 0x00400000
#define BTIF_BEM_SET_INQ_RSP_TX_PWR 0x00800000
#define BTIF_BEM_SET_EXT_INQ_RESP 0x01000000
#define BTIF_BEM_SET_ERR_DATA_REP 0x02000000
#define BTIF_BEM_KEY_PRESSED 0x04000000
#define BTIF_BEM_CONN_PACKET_TYPE_CHNG 0x08000000
#define BTIF_BEM_QOS_SETUP_COMPLETE 0x10000000
#define BTIF_BEM_MAX_SLOT_CHANGED 0x20000000
#define BTIF_BEM_SNIFFER_CONTROL_DONE 0x40000000
#define BTIF_BEM_LINK_POLICY_CHANGED 0x80000000
#define BTIF_BEM_ALL_EVENTS 0xffffffff

typedef uint8_t btif_error_code_t;

#define BTIF_BEC_NO_ERROR 0x00
#define BTIF_BEC_UNKNOWN_HCI_CMD 0x01
#define BTIF_BEC_NO_CONNECTION 0x02
#define BTIF_BEC_HARDWARE_FAILURE 0x03
#define BTIF_BEC_PAGE_TIMEOUT 0x04
#define BTIF_BEC_AUTHENTICATE_FAILURE 0x05
#define BTIF_BEC_MISSING_KEY 0x06
#define BTIF_BEC_MEMORY_FULL 0x07
#define BTIF_BEC_CONNECTION_TIMEOUT 0x08
#define BTIF_BEC_MAX_CONNECTIONS 0x09
#define BTIF_BEC_MAX_SCO_CONNECTIONS 0x0a
#define BTIF_BEC_ACL_ALREADY_EXISTS 0x0b
#define BTIF_BEC_COMMAND_DISALLOWED 0x0c
#define BTIF_BEC_LIMITED_RESOURCE 0x0d
#define BTIF_BEC_SECURITY_ERROR 0x0e
#define BTIF_BEC_PERSONAL_DEVICE 0x0f
#define BTIF_BEC_HOST_TIMEOUT 0x10
#define BTIF_BEC_UNSUPPORTED_FEATURE 0x11
#define BTIF_BEC_INVALID_HCI_PARM 0x12
#define BTIF_BEC_USER_TERMINATED 0x13
#define BTIF_BEC_LOW_RESOURCES 0x14
#define BTIF_BEC_POWER_OFF 0x15
#define BTIF_BEC_LOCAL_TERMINATED 0x16
#define BTIF_BEC_REPEATED_ATTEMPTS 0x17
#define BTIF_BEC_PAIRING_NOT_ALLOWED 0x18
#define BTIF_BEC_UNKNOWN_LMP_PDU 0x19
#define BTIF_BEC_UNSUPPORTED_REMOTE 0x1a
#define BTIF_BEC_SCO_OFFSET_REJECT 0x1b
#define BTIF_BEC_SCO_INTERVAL_REJECT 0x1c
#define BTIF_BEC_SCO_AIR_MODE_REJECT 0x1d
#define BTIF_BEC_INVALID_LMP_PARM 0x1e
#define BTIF_BEC_UNSPECIFIED_ERR 0x1f
#define BTIF_BEC_UNSUPPORTED_LMP_PARM 0x20
#define BTIF_BEC_ROLE_CHG_NOT_ALLOWED 0x21
#define BTIF_BEC_LMP_RESPONSE_TIMEOUT 0x22
#define BTIF_BEC_LMP_TRANS_COLLISION 0x23
#define BTIF_BEC_LMP_PDU_NOT_ALLOWED 0x24
#define BTIF_BEC_ENCRYP_MODE_NOT_ACC 0x25
#define BTIF_BEC_UNIT_KEY_USED 0x26
#define BTIF_BEC_QOS_NOT_SUPPORTED 0x27
#define BTIF_BEC_INSTANT_PASSED 0x28
#define BTIF_BEC_PAIR_UNITKEY_NO_SUPP 0x29
#define BTIF_BEC_NOT_FOUND 0xf1
#define BTIF_BEC_REQUEST_CANCELLED 0xf2

#define BTIF_BEC_INVALID_SDP_PDU 0xd1
#define BTIF_BEC_SDP_DISCONNECT 0xd2
#define BTIF_BEC_SDP_NO_RESOURCES 0xd3
#define BTIF_BEC_SDP_INTERNAL_ERR 0xd4

#define BTIF_BEC_STORE_LINK_KEY_ERR 0xe0

typedef uint32_t btif_iac_t;

#define BTIF_BT_IAC_GIAC 0x9E8B33 /* General/Unlimited Inquiry Access Code */
#define BTIF_BT_IAC_LIAC 0x9E8B00 /* Limited Dedicated Inquiry Access Code */

typedef uint8_t btif_link_type_t;

#define BTIF_BLT_SCO 0x00
#define BTIF_BLT_ACL 0x01
#define BTIF_BLT_ESCO 0x02

typedef U16 btif_acl_packet;

#define BTIF_BAPT_NO_2_DH1 0x0002
#define BTIF_BAPT_NO_3_DH1 0x0004
#define BTIF_BAPT_DM1 0x0008
#define BTIF_BAPT_DH1 0x0010
#define BTIF_BAPT_NO_2_DH3 0x0100
#define BTIF_BAPT_NO_3_DH3 0x0200
#define BTIF_BAPT_DM3 0x0400
#define BTIF_BAPT_DH3 0x0800
#define BTIF_BAPT_NO_2_DH5 0x1000
#define BTIF_BAPT_NO_3_DH5 0x2000
#define BTIF_BAPT_DM5 0x4000
#define BTIF_BAPT_DH5 0x8000

#define BTIF_2M_PACKET                                                         \
  (BTIF_BAPT_DM1 | BTIF_BAPT_DH1 | BTIF_BAPT_NO_3_DH1 | BTIF_BAPT_NO_3_DH3 |   \
   BTIF_BAPT_DM3 | BTIF_BAPT_DH3 | BTIF_BAPT_NO_3_DH5)
#define BTIF_3M_PACKET                                                         \
  (BTIF_BAPT_DM1 | BTIF_BAPT_DH1 | BTIF_BAPT_DM3 | BTIF_BAPT_DH3 |             \
   BTIF_BAPT_DM5 | BTIF_BAPT_DH5)
#define BTIF_1_SLOT_PACKET                                                     \
  (BTIF_BAPT_DM1 | BTIF_BAPT_DH1 | BTIF_BAPT_NO_3_DH1 | BTIF_BAPT_NO_2_DH3 |   \
   BTIF_BAPT_NO_3_DH3 | BTIF_BAPT_NO_2_DH5 | BTIF_BAPT_NO_3_DH5)
#define BTIF_3_SLOT_PACKET                                                     \
  (BTIF_BAPT_DM1 | BTIF_BAPT_NO_3_DH3 | BTIF_BAPT_NO_2_DH5 | BTIF_BAPT_NO_3_DH5)

typedef uint16_t btif_link_policy_t;

#define BTIF_BLP_DISABLE_ALL 0x0000
#define BTIF_BLP_MASTER_SLAVE_SWITCH 0x0001
#define BTIF_BLP_HOLD_MODE 0x0002
#define BTIF_BLP_SNIFF_MODE 0x0004
#define BTIF_BLP_PARK_MODE 0x0008
#define BTIF_BLP_SCATTER_MODE 0x0010

/* Mask must be updated if new policy values are added */
#define BLP_MASK 0xfff0         /* Disables ScatterNet bit */
#define BLP_SCATTER_MASK 0xffe0 /* Enables ScatterNet bit */

typedef uint8_t btif_accessible_mode_t;

#define BTIF_BAM_NOT_ACCESSIBLE 0x00 /* Non-discoverable or connectable */
#define BTIF_BAM_GENERAL_ACCESSIBLE                                            \
  0x03 /* General discoverable and connectable */
#define BTIF_BAM_LIMITED_ACCESSIBLE                                            \
  0x13 /* Limited discoverable and connectable */
#define BTIF_BAM_CONNECTABLE_ONLY 0x02  /* Connectable but not discoverable */
#define BTIF_BAM_DISCOVERABLE_ONLY 0x01 /* Discoverable but not connectable */
#define BTIF_BT_DEFAULT_ACCESS_MODE_PAIR BTIF_BAM_GENERAL_ACCESSIBLE
#define BTIF_BAM_INVALID_ACCESS_MODE 0xFF

/* End of BtAccessibleMode */

typedef uint8_t btif_oob_data_present_t;

#define BTIF_OOB_DATA_NOT_PRESENT 0 /* No Out of Band Data is present */
#define BTIF_OOB_DATA_PRESENT 1     /* Out of Band Data is present    */

typedef uint8_t btif_auth_requirements_t;

#define BTIF_MITM_PROTECT_NOT_REQUIRED                                         \
  0x00                                  /* No Man in the Middle protection  */
#define BTIF_MITM_PROTECT_REQUIRED 0x01 /* Man in the Middle protection req */

typedef uint8_t btif_link_mode_t;

#define BTIF_BLM_ACTIVE_MODE 0x00
#define BTIF_BLM_HOLD_MODE 0x01
#define BTIF_BLM_SNIFF_MODE 0x02
#define BTIF_BLM_PARK_MODE 0x03
#define BTIF_BLM_SCATTER_MODE 0x04

typedef uint8_t btif_link_key_type_t;

#define BTIF_COMBINATION_KEY 0x00
#define BTIF_LOCAL_UNIT_KEY 0x01
#define BTIF_REMOTE_UNIT_KEY 0x02
#define BTIF_DEBUG_COMBINATION_KEY 0x03
#define BTIF_UNAUTH_COMBINATION_KEY 0x04
#define BTIF_AUTH_COMBINATION_KEY 0x05
#define BTIF_CHANGED_COMBINATION_KEY 0x06
#define BTIF_IBRT_STORE_ADDR_ONLY 0x07

typedef uint8_t btif_connection_role_t;

#define BTIF_BCR_MASTER 0x00
#define BTIF_BCR_SLAVE 0x01
#define BTIF_BCR_ANY 0x02
#define BTIF_BCR_UNKNOWN 0x03
#define BTIF_BCR_PSLAVE 0x04
#define BTIF_BCR_PMASTER 0x05

typedef uint8_t btif_stack_state_t;

typedef enum {
  HCI_CMD_COMPLETE_USER_IBRT_CMD = 0,
  HCI_CMD_COMPLETE_USER_BLE = 1,
  HCI_CMD_COMPLETE_USER_RESEVER_1 = 2,
  HCI_CMD_COMPLETE_USER_RESEVER_2 = 3,
  HCI_CMD_COMPLETE_USER_RESEVER_3 = 4,
  HCI_CMD_COMPLETE_USER_RESEVER_4 = 5,

  HCI_CMD_COMPLETE_USER_NUM,
} HCI_CMD_COMPLETE_USER_E;

/* The stack has completed initialization of the radio hardware. */
#define BTIF_BTSS_NOT_INITIALIZED 0

/* The stack is initialized. */
#define BTIF_BTSS_INITIALIZED 1

/* The stack has encountered an error while initializing the radio hardware. */
#define BTIF_BTSS_INITIALIZE_ERR 2

/* The stack is deinitializing. */
#define BTIF_BTSS_DEINITIALIZE 3

/* End of BtStackState */
typedef void btif_remote_device_t;

typedef void btif_BtDeviceContext;

/* Forward declaration of the callback parameters */
typedef void btif_event_t;

typedef void (*btif_callback)(const void *);
typedef void (*ibrt_cmd_status_callback)(const uint8_t *para);
typedef void (*ibrt_cmd_complete_callback)(const uint8_t *para);
typedef uint8_t (*btif_callback_ext)(const void *);
typedef uint8_t (*btif_callback_ext2)(void);
typedef void (*btif_callback_ext3)(void);

typedef uint8_t btif_inquiry_mode_t;

#define BTIF_INQ_MODE_NORMAL 0    /* Normal Inquiry Response format           */
#define BTIF_INQ_MODE_RSSI 1      /* RSSI Inquiry Response format             */
#define BTIF_INQ_INVALID_RSSI 127 /* RSSI Inquiry Response format */
#define BTIF_INQ_MODE_EXTENDED 2  /* Extended or RSSI Inquiry Response format  \
                                   */

typedef uint8_t btif_rem_dev_state_t;

#define BTIF_BDS_DISCONNECTED 0x00
#define BTIF_BDS_OUT_CON 0x01   /* Starting an out going connection */
#define BTIF_BDS_IN_CON 0x02    /* In process of incoming connection */
#define BTIF_BDS_CONNECTED 0x03 /* Connected */
#define BTIF_BDS_OUT_DISC 0x04  /* Starting an out going disconnect */
#define BTIF_BDS_OUT_DISC2 0x05 /* Disconnect status received */
#define BTIF_BDS_OUT_CON2                                                      \
  0x06 /* In SCO, used when connection request has                             \
          been sent */

typedef uint8_t btif_eir_data_type_t;

#define BTIF_EIR_FLAGS 0x01
#define BTIF_EIR_SRV_CLASS_16_PART 0x02
#define BTIF_EIR_SRV_CLASS_16_WHOLE 0x03
#define BTIF_EIR_SRV_CLASS_32_PART 0x04
#define BTIF_EIR_SRV_CLASS_32_WHOLE 0x05
#define BTIF_EIR_SRV_CLASS_128_PART 0x06
#define BTIF_EIR_SRV_CLASS_128_WHOLE 0x07
#define BTIF_EIR_REM_NAME_PART 0x08
#define BTIF_EIR_REM_NAME_WHOLE 0x09
#define BTIF_EIR_TX_POWER 0x0A
#define BTIF_EIR_MAN_SPECIFIC 0xFF

#define BTIF_BR_USE_FEC (0 << 0)
#define BTIF_BR_NOT_USE_FEC (1 << 0)
#define BTIF_BR_NO_PKT_PRFER_AVALB (0 << 1)
#define BTIF_BR_USE_1_SLOT_PKT (1 << 1)
#define BTIF_BR_USE_3_SLOT_PKT (2 << 1)
#define BTIF_BR_USE_5_SLOT_PKT (3 << 1)
#define BTIF_EDR_USE_DM1_PKT (0 << 3)
#define BTIF_EDR_USE_2MB_PKT (1 << 3)
#define BTIF_EDR_USE_3MB_PKT (2 << 3)
#define BTIF_EDR_NO_PKT_PRFER_AVALB (0 << 5)
#define BTIF_EDR_USE_1_SLOT_PTK (1 << 5)
#define BTIF_EDR_USE_3_SLOT_PTK (2 << 5)
#define BTIF_EDR_USE_5_SLOT_PTK (3 << 5)

#define CONN_AUTO_ACCEPT_DISABLE 0x01

#define CONN_AUTO_ACCEPT_ENABLE_WITH_MSS_DISABLE 0x02

#define CONN_AUTO_ACCEPT_ENABLE_WITH_MSS_ENABLE 0x03
/*---------------------------------------------------------------------------
 * btif_class_of_device_t type
 *
 *     Bit pattern representing the class of device along with the
 *     supported services. There can be more than one supported service.
 *     Service classes can be ORed together. The Device Class is composed
 *     of a major device class plus a minor device class. ORing together
 *     each service class plus one major device class plus one minor device
 *     class creates the class of device value. The minor device class is
 *     interpreted in the context of the major device class.
 */

typedef uint32_t btif_class_of_device_t;

/* Group: Major Service Classes. Can be ORed together */
#define BTIF_COD_LIMITED_DISCOVERABLE_MODE 0x00002000
#define BTIF_COD_POSITIONING 0x00010000
#define BTIF_COD_NETWORKING 0x00020000
#define BTIF_COD_RENDERING 0x00040000
#define BTIF_COD_CAPTURING 0x00080000
#define BTIF_COD_OBJECT_TRANSFER 0x00100000
#define BTIF_COD_AUDIO 0x00200000
#define BTIF_COD_TELEPHONY 0x00400000
#define BTIF_COD_INFORMATION 0x00800000

/* Group: Major Device Classes (Select one) */
#define BTIF_COD_MAJOR_MISCELLANEOUS 0x00000000
#define BTIF_COD_MAJOR_COMPUTER 0x00000100
#define BTIF_COD_MAJOR_PHONE 0x00000200
#define BTIF_COD_MAJOR_LAN_ACCESS_POINT 0x00000300
#define BTIF_COD_MAJOR_AUDIO 0x00000400
#define BTIF_COD_MAJOR_PERIPHERAL 0x00000500
#define BTIF_COD_MAJOR_IMAGING 0x00000600
#define BTIF_COD_MAJOR_UNCLASSIFIED 0x00001F00

/* Group: Minor Device Class - Computer Major class */
#define BTIF_COD_MINOR_COMP_UNCLASSIFIED 0x00000000
#define BTIF_COD_MINOR_COMP_DESKTOP 0x00000004
#define BTIF_COD_MINOR_COMP_SERVER 0x00000008
#define BTIF_COD_MINOR_COMP_LAPTOP 0x0000000C
#define BTIF_COD_MINOR_COMP_HANDHELD 0x00000010
#define BTIF_COD_MINOR_COMP_PALM 0x00000014
#define BTIF_COD_MINOR_COMP_WEARABLE 0x00000018

/* Group: Minor Device Class - Phone Major class */
#define BTIF_COD_MINOR_PHONE_UNCLASSIFIED 0x00000000
#define BTIF_COD_MINOR_PHONE_CELLULAR 0x00000004
#define BTIF_COD_MINOR_PHONE_CORDLESS 0x00000008
#define BTIF_COD_MINOR_PHONE_SMART 0x0000000C
#define BTIF_COD_MINOR_PHONE_MODEM 0x00000010
#define BTIF_COD_MINOR_PHONE_ISDN 0x00000014

/* Group: Minor Device Class - LAN Access Point Major class */
#define BTIF_COD_MINOR_LAN_0 0x00000000          /* fully available */
#define BTIF_COD_MINOR_LAN_17 0x00000020         /* 1-17% utilized */
#define BTIF_COD_MINOR_LAN_33 0x00000040         /* 17-33% utilized */
#define BTIF_COD_MINOR_LAN_50 0x00000060         /* 33-50% utilized */
#define BTIF_COD_MINOR_LAN_67 0x00000080         /* 50-67% utilized */
#define BTIF_COD_MINOR_LAN_83 0x000000A0         /* 67-83% utilized */
#define BTIF_COD_MINOR_LAN_99 0x000000C0         /* 83-99% utilized */
#define BTIF_COD_MINOR_LAN_NO_SERVICE 0x000000E0 /* 100% utilized */

/* Group: Minor Device Class - Audio Major class */
#define BTIF_COD_MINOR_AUDIO_UNCLASSIFIED 0x00000000
#define BTIF_COD_MINOR_AUDIO_HEADSET 0x00000004
#define BTIF_COD_MINOR_AUDIO_HANDSFREE 0x00000008
#define BTIF_COD_MINOR_AUDIO_MICROPHONE 0x00000010
#define BTIF_COD_MINOR_AUDIO_LOUDSPEAKER 0x00000014
#define BTIF_COD_MINOR_AUDIO_HEADPHONES 0x00000018
#define BTIF_COD_MINOR_AUDIO_PORTABLEAUDIO 0x0000001C
#define BTIF_COD_MINOR_AUDIO_CARAUDIO 0x00000020
#define BTIF_COD_MINOR_AUDIO_SETTOPBOX 0x00000024
#define BTIF_COD_MINOR_AUDIO_HIFIAUDIO 0x00000028
#define BTIF_COD_MINOR_AUDIO_VCR 0x0000002C
#define BTIF_COD_MINOR_AUDIO_VIDEOCAMERA 0x00000030
#define BTIF_COD_MINOR_AUDIO_CAMCORDER 0x00000034
#define BTIF_COD_MINOR_AUDIO_VIDEOMONITOR 0x00000038
#define BTIF_COD_MINOR_AUDIO_VIDEOSPEAKER 0x0000003C
#define BTIF_COD_MINOR_AUDIO_CONFERENCING 0x00000040
#define BTIF_COD_MINOR_AUDIO_GAMING 0x00000048

/* Group: Minor Device Class - Peripheral Major class */
#define BTIF_COD_MINOR_PERIPH_KEYBOARD 0x00000040
#define BTIF_COD_MINOR_PERIPH_POINTING 0x00000080
#define BTIF_COD_MINOR_PERIPH_COMBOKEY 0x000000C0
/* Group: Minor Device Class - ORed with Peripheral Minor Device class */
#define BTIF_COD_MINOR_PERIPH_UNCLASSIFIED 0x00000000
#define BTIF_COD_MINOR_PERIPH_JOYSTICK 0x00000004
#define BTIF_COD_MINOR_PERIPH_GAMEPAD 0x00000008
#define BTIF_COD_MINOR_PERIPH_REMOTECTRL 0x0000000C
#define BTIF_COD_MINOR_PERIPH_SENSING 0x00000010
#define BTIF_COD_MINOR_PERIPH_DIGITIZER 0x00000014
#define BTIF_COD_MINOR_PERIPH_CARD_RDR 0x00000018

/* Group: Minor Device Class - Imaging Major class */
#define BTIF_COD_MINOR_IMAGE_UNCLASSIFIED 0x00000000
#define BTIF_COD_MINOR_IMAGE_DISPLAY 0x00000010
#define BTIF_COD_MINOR_IMAGE_CAMERA 0x00000020
#define BTIF_COD_MINOR_IMAGE_SCANNER 0x00000040
#define BTIF_COD_MINOR_IMAGE_PRINTER 0x00000080

/* Group: Masks used to isolate the class of device components */
#define BTIF_COD_SERVICE_MASK 0x00ffC000 /* Less LIAC bit */
#define BTIF_COD_MAJOR_MASK 0x00001F00
#define BTIF_COD_MINOR_MASK 0x000000FC
#define BTIF_COD_LIMITED_DISC_MASK 0x00002000 /* LIAC bit */

/* End of btif_class_of_device_t */

// when report_format=0,data_format will set the interval(unit:slot)
// when report_format=1,data_format will set the packet total num
// when report_format=2,data_format has no meaning
#define FLAG_RESET_DATA 2
#define FLAG_START_DATA 1
#define FLAG_GET_DATA 0

#define REP_FORMAT_TIME 0
#define REP_FORMAT_PACKET 1
#define REP_FORMAT_STOP_GET 2

// Vendor defined error code
#define BTIF_EVT_ERROR_SCO_UNKNOWN (0xE8)
#define BTIF_EVT_ERROR_ACL_UNKNOWN (0xE9)

typedef struct {
  list_entry_t node;
  uint8_t opType;
} btif_operation_t;

typedef struct {

  /* the mandatory sniff interval range for controllers is between 0x0006 and
   * 0x0540. The value is expressed in 0.625 ms increments (0x0006 = 3.75 ms).
   *
   * The actual interval selected by the radio will be returned in
   * a BTEVENT_MODE_CHANGE event.
   */

  uint16_t maxInterval;

  /* Minimum acceptable interval between each consecutive sniff period.
   * Must be an even number between 0x0002 and 0xFFFE, and be less than
   * "maxInterval". Like maxInterval this value is expressed in
   * 0.625 ms increments.
   */
  uint16_t minInterval;

  /* The number of master-to-slave transmission slots during which
   * a device should listen for traffic (sniff attempt).
   * Expressed in 0.625 ms increments. May be between 0x0001 and 0x7FFF.
   */
  uint16_t attempt;

  /* The amount of time before a sniff timeout occurs. Expressed in
   * 1.25 ms increments. May be between 0x0000 and 0x7FFF, but the mandatory
   * range for controllers is 0x0000 to 0x0028.
   */
  uint16_t timeout;
} btif_sniff_info_t;

typedef struct {

  /*  May be any number between 0x0000 and 0xFFFE.  The value is expressed in
   * 0.625 ms increments.
   */
  uint16_t maxLatency;

  /*  any number between 0x0000 and 0xFFFE.  The value is expressed in
   * 0.625 ms increments.
   */
  uint16_t minRemoteTimeout;

  /* Minimum base sniff subrate timeout that the local device may use.
   * May be any number between 0x0000 and 0xFFFE.  The value is expressed in
   * 0.625 ms increments.
   */
  uint16_t minLocalTimeout;
} btif_sniff_subrate_parms_t;

typedef struct {
  uint16_t inqInterval;  /* Inquiry scan interval */
  uint16_t inqWindow;    /* Inquiry scan Window */
  uint16_t pageInterval; /* Page scan interval */
  uint16_t pageWindow;   /* Page scan window */
} btif_access_mode_info_t;

typedef struct {
  list_entry_t node;       /* For internal stack use only. */
  btif_callback callback;  /* Pointer to callback function */
  btif_event_mask_t emask; /* For internal stack use only. */
} btif_handler;

/* Internal types required for BtRemoteDevice structure */
typedef uint8_t btif_auth_state_t;

typedef uint8_t btif_encrypt_state_t;

typedef uint8_t btif_authorize_state_t;

typedef uint8_t btif_sec_access_state_t;

typedef uint8_t btif_link_rx_state_t;

typedef uint8_t btif_op_type_t;

typedef struct {

  /* Reserved */
  uint8_t flags;

  /* Service Type: 0 = No Traffic, 1 = Best Effort, 2 Guaranteed */
  uint8_t serviceType;

  /* Token Rate in octets per second */
  uint32_t tokenRate;

  /* Peak Bandwidth in octets per second */
  uint32_t peakBandwidth;

  /* Latency in microseconds */
  uint32_t latency;

  /* Delay Variation in microseconds */
  uint32_t delayVariation;
} btif_qos_info_t;

typedef struct {
  bt_bdaddr_t bdAddr;
  BOOL trusted;
  uint8_t linkKey[16];
  btif_link_key_type_t keyType;

  uint8_t pinLen;
} btif_device_record_t;

typedef struct {
  btif_operation_t op;
  uint8_t len;
  uint8_t data[31];
} btif_write_adv_data_op_t;

typedef struct {
  uint16_t interval_min;
  uint16_t interval_max;
  uint8_t adv_type;
  uint8_t own_addr_type;
  uint8_t peer_addr_type;
  bt_bdaddr_t bd_addr;
  uint8_t adv_chanmap;
  uint8_t adv_filter_policy;
} btif_adv_para_struct_t;

typedef struct {
  btif_operation_t op;
  btif_adv_para_struct_t adv_para;
} btif_write_adv_para_op_t;

typedef struct {
  btif_operation_t op;
  uint8_t en;
} btif_write_adv_en_op_t;

#define BLE_ADV_REPORT_MAX_LEN 31

typedef struct {
  uint8_t type;
  uint8_t addr_type;
  bt_bdaddr_t addr;
  uint8_t data_len;
  uint8_t data[BLE_ADV_REPORT_MAX_LEN];
  int8_t rssi;
} btif_ble_adv_report;

typedef struct {
  uint8_t scan_type;
  uint16_t scan_interval;
  uint16_t scan_window;
  uint8_t own_addr_type;
  uint8_t scan_filter_policy;
} btif_scan_para_struct_t;

typedef struct {
  btif_operation_t op;
  btif_scan_para_struct_t scan_para;
} btif_write_scan_para_op_t;

typedef struct {
  btif_operation_t op;
  uint8_t scan_en;
  uint32_t filter_duplicat;
} btif_write_scan_en_op_t;

typedef struct {
  bt_bdaddr_t bdAddr; /* Device Address */
  uint8_t linkKey[16];
} btif_dev_linkkey;

typedef struct {
  U8 psRepMode;
  U8 psMode;
  U16 clockOffset;
} bt_page_scanInfo_t;

typedef struct {
  bt_bdaddr_t bdAddr;     /* Device Address */
  bt_page_scanInfo_t psi; /* Page scan info used for connecting */
  U8 psPeriodMode;
  U32 classOfDevice;

  /* RSSI in dBm (-127 to +20). Only valid when controller reports RSSI with
   * in inquiry results (also see ME_SetInquiryMode). Otherwise it will be
   * set to BT_INVALID_RSSI.
   */
  S8 rssi;

  /* Extended Inquiry response.  Only valid when controller reports an
   * extended inquiry (also see ME_SetInquiryMode).  Otherwise it will be
   * set to all 0's.
   */
  U8 extInqResp[240];

  /* Describes the format of the current inquiry result */
  U8 inqMode;

} bt_Inquiry_result_t;

typedef struct {
  /* Event causing callback. Always valid.*/
  uint8_t eType;

  /* Error code. See BtEventType for guidance on whether errCode is valid. */
  uint8_t errCode;

  /* Pointer to handler. Only valid for events directed to BtHandlers. */
  btif_handler *handler;

  /* Parameters */
  union {
    btif_accessible_mode_t aMode; /* New access mode */
    void *remDev;                 /* Pointer to remote device */
    bt_bdaddr_t bdAddr;           /* Device Address */
    void *meToken;                /* Me command token */
    U8 pMode;                     /* Simple Pairing Mode */

#ifdef __TWS_RECONNECT_USE_BLE__
    struct {
      U8 *data;
      U16 len;
    } twsBleReport;
#endif
    bt_Inquiry_result_t inqResult;

    void *secToken; /* Security Token */
    void *token;

    /* Information for BTEVENT_PAIRING_COMPLETE */
    struct {
      void *remDev;
      btif_link_key_type_t keyType;
    } pairingInfo;

    /* Information for BTEVENT_PIN_REQ */
    struct {
      void *remDev;

      /* If > 0 then the pin length returned in SEC_SetPin must be >= pinLen */
      U8 pinLen;
    } pinReq;

    /* Information for BTEVENT_SET_INQUIRY_MODE_CNF */
    btif_inquiry_mode_t inqMode;

    /* Information for BTEVENT_SET_INQ_TX_PWR_LVL_CNF */
    S8 inqTxPwr;

    /* Information for BTEVENT_REMOTE_FEATURES */
    struct {
      bt_bdaddr_t bdAddr;
      U8 features[8];
    } remoteFeatures;

    /* Information for BTEVENT_REM_HOST_FEATURES */
    struct {
      bt_bdaddr_t bdAddr;
      U8 features[8];
    } remHostFeatures;

    /* Information for BTEVENT_LINK_SUPERV_TIMEOUT_CHANGED */
    struct {
      void *remDev;
      U16 timeout;
    } linkSupervision;

    /* Information for BTEVENT_MAX_SLOT_CHANGED */
    struct {
      U16 connHandle;
      U8 maxSlot;
    } maxSlotChanged;

    /* Information for BTEVENT_QOS_SETUP_COMPLETE */
    struct {

      /* Reserved */
      U8 flags;

      /* Service Type: 0 = No Traffic, 1 = Best Effort, 2 Guaranteed */
      U8 serviceType;

      /* Token Rate in octets per second */
      U32 tokenRate;

      /* Peak Bandwidth in octets per second */
      U32 peakBandwidth;

      /* Latency in microseconds */
      U32 latency;

      /* Delay Variation in microseconds */
      U32 delayVariation;
    } qos;

    /* Result for BTEVENT_SET_SNIFF_SUBRATING_PARMS_CNF */
    btif_sniff_subrate_parms_t *sniffSubrateParms;

    /* Information for BTEVENT_SNIFF_SUBRATE_INFO */
    struct {
      /* Pointer to the remote device */
      void *remDev;

      /* Maximum latency for data being transmitted from the local
       * device to the remote device.
       */
      U16 maxTxLatency;

      /* Maximum latency for data being received by the local
       * device from the remote device.
       */
      U16 maxRxLatency;

      /* The base sniff subrate timeout in baseband slots that the
       * remote device shall use.
       */
      U16 minRemoteTimeout;

      /* The base sniff subrate timeout in baseband slots that the
       * local device will use.
       */
      U16 minLocalTimeout;
    } sniffSubrateInfo;

    /* Result for BTEVENT_LOCAL_OOB_DATA */
    struct {
      /* Simple Pairing Hash C from the local device */
      U8 hashC[16];

      /* Simple Pairing Randomizer R the local device */
      U8 randR[16];
    } oobData;

    /* Information for BTEVENT_CONFIRM_NUMERIC_REQ, BTEVENT_PASS_KEY_REQ,
     * and BTEVENT_DISPLAY_NUMERIC_IND
     */
    struct {
      void *remDev; /* Pointer to the remote device */
      U32 numeric;  /* Numeric value received from Secure
                     * Simple Pairing (not valid for
                     * BTEVENT_PASS_KEY_REQ
                     */

      U8 bondingMode; /* Bonding has been requested */
    } userIoReq;

    /* Result for BTEVENT_ENCRYPTION_CHANGE event. */
    struct {
      void *remDev;
      U8 mode; /* New encryption mode (uses the
                * BtEncryptMode type) */
    } encrypt;

    /* Result for BTEVENT_KEY_PRESSED */
    struct {
      bt_bdaddr_t bdAddr; /* Address of the device sending the keypress */
      U8 parm;            /* The value of the keypress parameter */
    } keyPress;

    struct {
      void *remDev;

      /* If disconnection was successful, contains BEC_NO_ERROR.
       * errCode will contain the disconnect reason.
       *
       * Unsuccessful disconnections will contain an error code
       * as generated by the radio. In this case, errCode can be
       * ignored.
       */
      btif_error_code_t status;
    } disconnect;

    /* Result for the BTEVENT_SCO_DATA_CNF event */
    struct {
      void *remDev;    /* Pointer to remote device */
      void *scoCon;    /* SCO connection */
      void *scoPacket; /* SCO Packet Handled */
    } scoPacketHandled;

    /* Result for the BTEVENT_SCO_CONNECT_CNF && BTEVENT_SCO_CONNECT_IND
       events.
     */
    struct {
      void *remDev;     /* Pointer to remote device */
      U16 scoHandle;    /* SCO Connection handle for HCI */
      void *scoCon;     /* SCO connection */
      U8 scoLinkType;   /* SCO link type */
      void *scoTxParms; /* Pointer to eSCO TX parameters */
      void *scoRxParms; /* Pointer to eSCO RX parameters */
    } scoConnect;

    /* Result for the BTEVENT_SCO_DATA_IND event */
    struct {
      void *remDev;  /* Pointer to remote device */
      U16 scoHandle; /* SCO Connection handle for HCI */
      void *scoCon;  /* SCO connection. */
      U8 len;        /* SCO data len */
      U8 *ptr;       /* SCO data ptr */
      U8 errFlags;   /* Erroneous Data Reporting */
    } scoDataInd;

    /* Result for the BTEVENT_SECURITY_CHANGE and
     * BTEVENT_SECURITY3_COMPLETE events
     */
    struct {
      U8 mode;      /* New security mode (uses the BtSecurityMode
                     * type). */
      BOOL encrypt; /* Indicate if encryption set or not */
    } secMode;

    /* Results for the BTEVENT_MODE_CHANGE event */
    struct {
      void *remDev;
      uint8_t curMode;
      U16 interval;
    } modeChange;

    /* Results for BTEVENT_ROLE_CHANGE */
    struct {
      void *remDev;
      uint8_t newRole; /* New role */
    } roleChange;

    /* Results for BTEVENT_ACL_DATA_ACTIVE */
    struct {
      void *remDev;
      uint16_t dataLen; /* ACL data length */
    } aclDataActive;

    /* Results for BTEVENT_ACL_DATA_NOT_ACTIVE */
    struct {
      void *remDev;
      uint16_t dataLen; /* ACL data length */
    } aclDataNotActive;
    struct {
      uint8_t status;
      bt_bdaddr_t bdAddr; /* Address of the device sending the keypress */
    } name_rsp;
    struct {
      btif_remote_device_t *conn;
    } conn_req;
  } edata;
} event_t;

typedef struct {
  event_t *evt;
  btif_event_mask_t mask;
} me_event_t;
typedef bool (*ibrt_io_capbility_callback)(void *bdaddr);
typedef void (*ibrt_disconnect_callback)(const void *event);
typedef void (*btif_cmgr_callback)(void *handler, uint8_t event,
                                   bt_status_t status);
typedef void (*btif_global_handle)(const btif_event_t *Event);

#ifdef __cplusplus
extern "C" {
#endif /*  */
bt_status_t btif_me_get_tws_slave_mobile_rssi(uint16_t ConnHandle);

void btif_me_set_sniffer_env(uint8_t sniffer_acitve, uint8_t sniffer_role,
                             uint8_t *monitored_addr, uint8_t *sniffer_addr);
BOOL btif_me_get_remote_device_initiator(btif_remote_device_t *rdev);
uint16_t btif_me_get_remote_device_hci_handle(btif_remote_device_t *rdev);
btif_remote_device_t *btif_me_get_remote_device_by_handle(uint16_t hci_handle);
uint16_t
btif_me_get_hci_handle_by_remote_dev(btif_remote_device_t *p_remote_dev);
btif_remote_device_t *btif_me_get_remote_device_by_bdaddr(bt_bdaddr_t *bdaddr);
uint8_t btif_me_get_remote_device_op_optype(btif_remote_device_t *rdev);
btif_connection_role_t
btif_me_get_remote_device_role(btif_remote_device_t *rdev);
void btif_me_set_remote_device_role(btif_remote_device_t *rdev, uint8_t role);
BOOL *btif_me_get_remote_device_new_link_key(btif_remote_device_t *rdev);
void *btif_me_get_remote_device_parms(btif_remote_device_t *rdev);
bt_status_t btif_me_exchange_bt_addr(uint16_t connHandle);
bool btif_me_role_switch_pending(uint16_t handle);
bool btif_me_is_tws_role_switch_pending();
bool btif_me_is_exechange_bt_addr_pending();
bool is_btif_me_current_role_bcr_master(btif_remote_device_t *device);
bt_status_t btif_me_inquiry(uint32_t lap, uint8_t len, uint8_t maxResp);
bt_status_t btif_me_ble_add_dev_to_whitelist(uint8_t addr_type,
                                             bt_bdaddr_t *addr);
bt_status_t btif_me_ble_clear_whitelist(void);
bt_status_t btif_me_ble_set_private_address(bt_bdaddr_t *addr);
bt_status_t btif_me_ble_set_adv_data(uint8_t len, uint8_t *data);
bt_status_t btif_me_ble_set_scan_rsp_data(U8 len, U8 *data);
bt_status_t btif_me_ble_set_adv_parameters(btif_adv_para_struct_t *para);
bt_status_t btif_me_ble_set_adv_en(uint8_t en);
bt_status_t btif_me_ble_set_scan_parameter(btif_scan_para_struct_t *para);
bt_status_t btif_me_ble_set_scan_en(uint8_t scan_en, uint8_t filter_duplicate);
bt_status_t
btif_me_ble_receive_adv_report(void (*cb)(const btif_ble_adv_report *report));
bt_status_t btif_sec_find_device_record(const bt_bdaddr_t *bdAddr,
                                        btif_device_record_t *record);

uint8_t btif_sec_set_io_capabilities(uint8_t ioCap);
uint8_t btif_sec_set_authrequirements(uint8_t authRequirements);
uint8_t btif_me_get_callback_event_type(const btif_event_t *event);
uint8_t btif_me_get_callback_event_rem_dev_role(const btif_event_t *event);
bt_bdaddr_t *
btif_me_get_callback_event_rem_dev_bd_addr(const btif_event_t *event);
bt_bdaddr_t *btif_me_get_callback_event_disconnect_rem_dev_bd_addr(
    const btif_event_t *event);
btif_remote_device_t *
btif_me_get_callback_event_disconnect_rem_dev(const btif_event_t *event);
btif_remote_device_t *
btif_me_get_callback_event_role_change_rem_dev(const btif_event_t *event);
uint8_t btif_me_get_callback_event_disconnect_rem_dev_disc_reason_saved(
    const btif_event_t *event);
uint8_t btif_me_get_callback_event_disconnect_rem_dev_disc_reason(
    const btif_event_t *event);

uint8_t btif_me_get_pendCons(void);

uint8_t btif_me_get_activeCons(void);

void btif_me_set_pendCons(uint8_t pendCons);

void btif_me_set_activeCons(uint8_t activeCons);

btif_remote_device_t *
btif_me_get_callback_event_rem_dev(const btif_event_t *event);

btif_BtDeviceContext *btif_me_get_bt_device_context(const btif_event_t *event);

uint16_t btif_me_get_scohdl_by_connhdl(uint16_t conn_handle);
btif_remote_device_t *
btif_me_get_callback_event_sco_connect_rem_dev(const btif_event_t *event);
uint8_t
btif_me_get_callback_event_role_change_new_role(const btif_event_t *event);
bt_bdaddr_t *
btif_me_get_callback_event_inq_result_bd_addr(const btif_event_t *event);
uint8_t *
btif_me_get_callback_event_inq_result_bd_addr_addr(const btif_event_t *event);
uint8_t
btif_me_get_callback_event_inq_result_inq_mode(const btif_event_t *event);
uint8_t btif_me_get_callback_event_rssi(const btif_event_t *event);
uint8_t *
btif_me_get_callback_event_inq_result_ext_inq_resp(const btif_event_t *event);
uint32_t
btif_me_get_callback_event_inq_result_classofdevice(const btif_event_t *event);
uint8_t btif_me_get_callback_event_err_code(const btif_event_t *event);
uint8_t btif_me_get_callback_event_a_mode(const btif_event_t *event);
uint16_t btif_me_get_callback_event_max_slot_changed_connHandle(
    const btif_event_t *event);
uint8_t
btif_me_get_callback_event_max_slot_changed_max_slot(const btif_event_t *event);
uint8_t
btif_me_get_callback_event_mode_change_curMode(const btif_event_t *event);
uint16_t
btif_me_get_callback_event_mode_change_interval(const btif_event_t *event);

uint16_t btif_me_get_callback_event_remote_dev_name(const btif_event_t *event,
                                                    uint8_t **ppName);

bt_status_t btif_me_get_remote_device_name(const bt_bdaddr_t *bdAddr,
                                           btif_global_handle handler);

uint8_t btif_me_get_ext_inq_data(uint8_t *eir, btif_eir_data_type_t type,
                                 uint8_t *outBuffer, uint8_t Length);
bt_status_t btif_me_cancel_inquiry(void);
bt_status_t btif_sec_delete_device_record(const bt_bdaddr_t *bdAddr);
bt_status_t btif_me_cancel_create_link(btif_handler *handler,
                                       btif_remote_device_t *rdev);
void btif_me_set_handler(void *handler, btif_callback cb);
uint8_t btif_me_set_connection_role(uint8_t role);
bt_status_t btif_me_disconnect_link(btif_handler *handler,
                                    btif_remote_device_t *rdev);
bt_status_t btif_me_set_link_policy(btif_remote_device_t *rdev,
                                    btif_link_policy_t policy);
bt_status_t btif_me_set_link_lowlayer_monitor(btif_remote_device_t *rdev,
                                              uint8_t control_flag,
                                              uint8_t report_format,
                                              uint32_t data_format,
                                              uint8_t report_unit);
bt_status_t btif_me_set_connection_qos_info(btif_remote_device_t *rdev,
                                            btif_qos_info_t *qosInfo);
void btif_me_fake_tws_disconnect(uint16_t hci_handle, uint8_t reason);
void btif_me_fake_mobile_disconnect(uint16_t hci_handle, uint8_t reason);
void btif_me_fake_tws_connect(uint8_t status, uint16_t hci_handle,
                              bt_bdaddr_t *bdAddr);
void btif_me_reset_bt_controller(void);
void btif_me_fake_mobile_connect(uint8_t status, uint16_t hci_handle,
                                 bt_bdaddr_t *bdAddr);

bt_status_t btif_me_set_lbrt_enable(uint16_t connHandle, uint8_t enable);
bt_status_t btif_me_set_accessible_mode(btif_accessible_mode_t mode,
                                        const btif_access_mode_info_t *info);
bt_status_t btif_me_write_page_timeout(uint16_t timeout);
bool btif_me_is_op_in_progress(btif_remote_device_t *rdev);
bt_status_t btif_me_switch_role(btif_remote_device_t *rdev);
bt_status_t btif_me_register_global_handler(void *handler);
void *btif_me_register_accept_handler(void *handler);
bt_status_t btif_me_set_event_mask(void *handler, btif_event_mask_t mask);
void *btif_me_get_bt_handler(void);
bt_status_t btif_me_set_bt_address(uint8_t *btAddr);
bt_status_t btif_me_set_local_device_name(const U8 *name, U8 length);
bt_status_t btif_me_set_ble_bd_address(uint8_t *btAddr);
bt_status_t btif_sec_add_device_record(btif_device_record_t *record);
bt_status_t btif_enum_device_record(U16 dev_id, btif_device_record_t *record);
bt_bdaddr_t *btif_me_get_remote_device_bdaddr(btif_remote_device_t *rdev);
btif_rem_dev_state_t
btif_me_get_remote_device_state(btif_remote_device_t *rdev);
btif_link_mode_t btif_me_get_remote_device_mode(btif_remote_device_t *rdev);
btif_authorize_state_t
btif_me_get_remote_device_auth_state(btif_remote_device_t *rdev);
bt_status_t btif_me_write_link_superv_timeout(uint16_t handle, uint16_t slots);
btif_link_mode_t btif_me_get_current_mode(btif_remote_device_t *rdev);
btif_connection_role_t btif_me_get_current_role(btif_remote_device_t *rdev);

bt_status_t btif_me_start_sniff(btif_remote_device_t *rdev,
                                btif_sniff_info_t *info);

bt_status_t btif_me_stop_sniff(btif_remote_device_t *rdev);

bt_status_t btif_me_accept_incoming_link(const btif_event_t *event,
                                         btif_remote_device_t *rdev,
                                         btif_connection_role_t role);

bt_status_t btif_me_reject_incoming_link(btif_remote_device_t *rdev,
                                         btif_error_code_t reason);

bt_status_t btif_me_start_tws_role_switch(uint16_t slaveConnHandle,
                                          uint16_t mobileConnHandle);
bt_status_t btif_me_set_sco_tx_silence(uint16_t connHandle, uint8_t silence_on);
void btif_me_increase_active_counts(void);
bool btif_me_is_sending_data_to_peer_dev_pending(void);
btif_handler *btif_me_get_me_handler(void);
bt_status_t
btif_me_force_disconnect_link_with_reason(btif_handler *handler,
                                          btif_remote_device_t *rdev,
                                          uint8_t reason, BOOL forceDisconnect);

void btif_me_sec_set_io_cap_rsp_reject_ext(BOOL (*ext_fn)(void *));
void btif_me_write_bt_sleep_enable(uint8_t sleep_en);
void btif_me_write_bt_page_scan_type(uint8_t scan_type);
void btif_me_write_bt_inquiry_scan_type(uint8_t scan_type);

#if IS_USE_INTERNAL_ACL_DATA_PATH
bt_status_t btif_me_send_data_to_peer_dev(uint16_t connHandle, uint8_t dataLen,
                                          uint8_t *data);
#endif /*  */
void btif_bt_call_back(const btif_event_t *event);
void btif_me_init_handler(btif_handler *handler);
bt_status_t btif_me_dbg_sniffer_interface(uint16_t connHandle, uint8_t subCode);
bt_status_t btif_me_switch_sco(uint16_t scohandle);
uint8_t *btif_me_get_remote_device_version(btif_remote_device_t *rdev);
void *btif_me_get_cmgr_handler();
bt_status_t btif_bind_cmgr_handler(void *cmgr_handler, bt_bdaddr_t *bdAddr,
                                   btif_cmgr_callback Callback);
bt_status_t btif_create_acl_to_slave(void *cmgr_handler, bt_bdaddr_t *bdAddr,
                                     btif_cmgr_callback Callback);
bt_status_t btif_register_cmgr_handle(void *cmgr_handler,
                                      btif_cmgr_callback Callback);
void btif_me_update_cmgr_info(void *cmgr_handler,
                              btif_BtDeviceContext *bt_device_context,
                              btif_remote_device_t *rdev);
void btif_me_unregister_globa_handler(btif_handler *handler);
void btif_me_set_inquiry_mode(uint8_t mode);
void btif_me_inquiry_result_setup(uint8_t *inquiry_buff, bool rssi,
                                  bool extended_mode);
btif_remote_device_t *btif_me_enumerate_remote_devices(uint32_t devid);

uint8_t btif_me_get_remote_sevice_encrypt_state(btif_remote_device_t *rdev);

uint8_t
btif_me_get_remote_device_disc_reason_saved(btif_remote_device_t *device);

uint8_t btif_me_get_remote_device_disc_reason(btif_remote_device_t *device);

void btif_me_event_report(me_event_t *event);
void btif_me_init_peer_headset_addr(uint8_t *p_remote_addr);
bt_bdaddr_t *btif_me_get_peer_headset_addr(void);
uint8_t btif_me_get_remote_device_link_mode(btif_remote_device_t *rdev);
uint8_t btif_me_get_remote_device_bt_role(btif_remote_device_t *rdev);
bt_status_t btif_me_change_packet_type(btif_remote_device_t *rdev,
                                       btif_acl_packet packetTypes);
void btif_me_cobuf_state_dump(void);
void btif_me_hcibuff_state_dump(void);
bt_status_t btif_me_read_controller_memory(uint32_t addr, uint32_t len,
                                           uint8_t type);
bt_status_t btif_me_write_controller_memory(uint32_t addr, uint32_t val,
                                            uint8_t type);
bt_status_t btif_me_qos_set_up(uint16_t conn_handle);
void btif_set_sco_max_number(uint8_t num);
uint8_t btif_get_sco_max_number();
#if defined(IBRT)
// ibrt fast ack toggle
#define IBRT_FAST_ACK_OFF (0)
#define IBRT_FAST_ACK_ON (1)
// ibrt fast direction
#define IBRT_FAST_ACK_TX 0
#define IBRT_FAST_ACK_RX 1
// ibrt slave flow control
#define IBRT_SLAVE_FLOW_CTRL_ON IBRT_FAST_ACK_OFF
#define IBRT_SLAVE_FLOW_CTRL_OFF IBRT_FAST_ACK_ON

bt_status_t btif_me_enable_fastack(uint16_t conhdl, uint8_t direction,
                                   uint8_t enable);
bt_status_t btif_me_start_ibrt(U16 slaveConnHandle, U16 mobileConnHandle);
bt_status_t btif_me_stop_ibrt(uint8_t enable, uint8_t reason);
bt_status_t btif_me_suspend_ibrt(void);
bt_status_t btif_me_ibrt_mode_init(bool enable);
bt_status_t btif_me_ibrt_role_switch(uint8_t switch_op);

void btif_me_set_ibrt_mobile_hci_handle(uint16_t hci_handle);
uint16_t btif_me_get_ibrt_mobile_hci_handle(void);

void btif_me_set_devctx_state(uint8_t ctx_idx, uint16_t state);
void btif_me_set_devctx_link(uint8_t ctx_idx, btif_remote_device_t *rm_dev);
bt_bdaddr_t *btif_me_get_devctx_btaddr(uint8_t ctx_idx);
btif_remote_device_t *btif_me_get_remote_device(uint8_t dev_index);
void btif_me_free_tws_outgoing_dev(uint8_t *peer_tws_addr);
btif_remote_device_t *btif_me_get_devctx_remote_device(uint8_t ctx_idx);
btif_remote_device_t *btif_me_avdev_ctx_get_conn_remote_device(uint8_t dev_idx);

uint32_t btif_me_save_record_ctx(uint8_t *ctx_buffer, uint8_t *addr);
uint32_t btif_me_set_record_ctx(uint8_t *ctx_buffer, uint8_t *addr);
uint32_t btif_me_save_me_ctx(uint8_t *ctx_buffer, uint16_t dev_id);
uint32_t btif_me_set_me_ctx(uint8_t *ctx_buffer, uint16_t dev_id);
uint8_t btif_me_get_mobile_avdev_index(uint16_t mobile_handle);
uint8_t btif_me_get_free_avdev_index(void);
uint32_t btif_me_save_avdev_ctx(uint8_t *ctx_buffer, uint16_t dev_id);
uint32_t btif_me_set_avdev_ctx(uint8_t *ctx_buffer, uint16_t dev_id,
                               uint8_t rm_devtbl_idx);
void btif_me_conn_auto_accept_enable(uint8_t *condition);
uint8_t btif_me_get_callback_event_encty_mode(const btif_event_t *event);
btif_dev_linkkey *btif_me_get_callback_link_key(const btif_event_t *event);
void btif_me_register_ibrt_disconnect_callback(btif_callback cb);
bt_status_t btif_me_set_tws_poll_interval(uint16_t conn_handle,
                                          uint16_t poll_interval);
bt_status_t btif_me_resume_ibrt(uint8_t enable);
void btif_me_write_scan_activity_specific(uint16_t opcode,
                                          uint16_t scan_interval,
                                          uint16_t scan_window);
void btif_me_write_dbg_sniffer(const uint8_t subcode,
                               const uint16_t connhandle);
void btif_me_ibrt_simu_hci_event_disallow(uint8_t opcode1, uint8_t opcode2);
void btif_me_register_conn_req_pre_treatment_callback(btif_callback cb);
void btif_me_register_cmd_status_callback(btif_callback cb);
void btif_me_register_cmd_complete_callback(HCI_CMD_COMPLETE_USER_E index,
                                            btif_callback cb);
bt_status_t btif_me_ibrt_conn_connected(bt_bdaddr_t *bt_addr, uint16_t conhdl);
bt_status_t btif_me_ibrt_conn_disconnected(bt_bdaddr_t *bt_addr,
                                           uint16_t conhdl, uint8_t status,
                                           uint8_t reason);
void btif_me_register_ibrt_io_capbility_callback(ibrt_io_capbility_callback cb);
bt_status_t btif_me_auth_req(uint16_t conn_handle);
void btif_me_set_ecc_ibrt_data_test(uint8_t ecc_data_test_en,
                                    uint8_t ecc_data_len, uint16_t ecc_count,
                                    uint32_t data_pattern);
void btif_me_send_prefer_rate(uint16_t connhdl, uint8_t rate);
#endif
#ifdef __cplusplus
}
#endif /*  */
#endif /* __ME_H */