pinebuds/platform/hal/best2300p/reg_sensor_eng_best2300p.h

120 lines
5.2 KiB
C
Raw Permalink Normal View History

2022-08-15 04:20:27 -05:00
/***************************************************************************
*
* Copyright 2015-2019 BES.
* All rights reserved. All unpublished rights reserved.
*
* No part of this work may be used or reproduced in any form or by any
* means, or stored in a database or retrieval system, without prior written
* permission of BES.
*
* Use of this work is governed by a license granted by BES.
* This work contains confidential and proprietary information of
* BES. which is protected by copyright, trade secret,
* trademark and other intellectual property rights.
*
****************************************************************************/
#ifndef __REG_SENSOR_ENG_BEST2300P_H__
#define __REG_SENSOR_ENG_BEST2300P_H__
#include "plat_types.h"
struct SENSOR_ENG_T {
__IO uint32_t SLV0_CONFIG_REG; // 0000
__IO uint32_t SLV1_CONFIG_REG; // 0004
__IO uint32_t SLV2_CONFIG_REG; // 0008
__IO uint32_t SLV3_CONFIG_REG; // 000C
__IO uint32_t GLOBAL_CFG0_REG; // 0010
__IO uint32_t GLOBAL_CFG1_REG; // 0014
__IO uint32_t GLOBAL_CFG2_REG; // 0018
__IO uint32_t GLOBAL_CFG3_REG; // 001C
__IO uint32_t SLV0_INTR_MASK; // 0020
__IO uint32_t SLV1_INTR_MASK; // 0024
__IO uint32_t SLV2_INTR_MASK; // 0028
__IO uint32_t SLV3_INTR_MASK; // 002C
__IO uint32_t SENSOR_INTR_CLR; // 0030
__I uint32_t SENSOR_INTR_STS; // 0034
__IO uint32_t TIMER_INTVL_NUM; // 0038
__IO uint32_t SENSOR_STATUS; // 003C
__IO uint32_t I2C0_BASE_ADDR; // 0040
__IO uint32_t I2C1_BASE_ADDR; // 0044
__IO uint32_t SPI0_BASE_ADDR; // 0048
__IO uint32_t SPI1_BASE_ADDR; // 004C
__IO uint32_t SPI2_BASE_ADDR; // 0050
};
// 0000 - 000C
#define SLV_SPI_RXDS (1 << 15)
#define SLV_RDN_WR (1 << 14)
#define SLV_I2C_SPI_SEL_SHIFT 11
#define SLV_I2C_SPI_SEL_MASK (0x7 << SLV_I2C_SPI_SEL_SHIFT)
#define SLV_I2C_SPI_SEL(n) BITFIELD_VAL(SLV_I2C_SPI_SEL, n)
#define SLV_SLV_DEV_ID_SHIFT 1
#define SLV_SLV_DEV_ID_MASK (0x3FF << SLV_SLV_DEV_ID_SHIFT)
#define SLV_SLV_DEV_ID(n) BITFIELD_VAL(SLV_SLV_DEV_ID, n)
#define SLV_ENABLE (1 << 0)
// 0010
#define GBL_CODEC_SX_SEL_SHIFT 5
#define GBL_CODEC_SX_SEL_MASK (0x3 << GBL_CODEC_SX_SEL_SHIFT)
#define GBL_CODEC_SX_SEL(n) BITFIELD_VAL(GBL_CODEC_SX_SEL, n)
#define GBL_TRI_INORDER (1 << 4)
#define GBL_SENSORHUB_EN (1 << 3)
#define GBL_RESERVED (1 << 2)
#define GBL_TIMER_SEL (1 << 1)
#define GBL_TRIGGER_TYPE (1 << 0)
// 0014
#define NUM_OF_RX_LLI3_SHIFT 24
#define NUM_OF_RX_LLI3_MASK (0xFF << NUM_OF_RX_LLI3_SHIFT)
#define NUM_OF_RX_LLI3(n) BITFIELD_VAL(NUM_OF_RX_LLI3, n)
#define NUM_OF_RX_LLI2_SHIFT 16
#define NUM_OF_RX_LLI2_MASK (0xFF << NUM_OF_RX_LLI2_SHIFT)
#define NUM_OF_RX_LLI2(n) BITFIELD_VAL(NUM_OF_RX_LLI2, n)
#define NUM_OF_RX_LLI1_SHIFT 8
#define NUM_OF_RX_LLI1_MASK (0xFF << NUM_OF_RX_LLI1_SHIFT)
#define NUM_OF_RX_LLI1(n) BITFIELD_VAL(NUM_OF_RX_LLI1, n)
#define NUM_OF_RX_LLI0_SHIFT 0
#define NUM_OF_RX_LLI0_MASK (0xFF << NUM_OF_RX_LLI0_SHIFT)
#define NUM_OF_RX_LLI0(n) BITFIELD_VAL(NUM_OF_RX_LLI0, n)
// 001C
#define NUM_OF_TX_LLI3_SHIFT 24
#define NUM_OF_TX_LLI3_MASK (0xFF << NUM_OF_TX_LLI3_SHIFT)
#define NUM_OF_TX_LLI3(n) BITFIELD_VAL(NUM_OF_TX_LLI3, n)
#define NUM_OF_TX_LLI2_SHIFT 16
#define NUM_OF_TX_LLI2_MASK (0xFF << NUM_OF_TX_LLI2_SHIFT)
#define NUM_OF_TX_LLI2(n) BITFIELD_VAL(NUM_OF_TX_LLI2, n)
#define NUM_OF_TX_LLI1_SHIFT 8
#define NUM_OF_TX_LLI1_MASK (0xFF << NUM_OF_TX_LLI1_SHIFT)
#define NUM_OF_TX_LLI1(n) BITFIELD_VAL(NUM_OF_TX_LLI1, n)
#define NUM_OF_TX_LLI0_SHIFT 0
#define NUM_OF_TX_LLI0_MASK (0xFF << NUM_OF_TX_LLI0_SHIFT)
#define NUM_OF_TX_LLI0(n) BITFIELD_VAL(NUM_OF_TX_LLI0, n)
// 0030
#define SENSOR_INTR_CLEAR (1 << 0)
// 0034
#define EXT_SENSOR3_INTR (1 << 4)
#define EXT_SENSOR2_INTR (1 << 3)
#define EXT_SENSOR1_INTR (1 << 2)
#define EXT_SENSOR0_INTR (1 << 1)
#define SENSOR_WKUP_INTR (1 << 0)
// 0038
#define TIMER_INTERVAL_NUM_SHIFT 0
#define TIMER_INTERVAL_NUM_MASK (0xFF << TIMER_INTERVAL_NUM_SHIFT)
#define TIMER_INTERVAL_NUM(n) BITFIELD_VAL(TIMER_INTERVAL_NUM, n)
// 003C
#define SENSOR_ENG_FSM_SHIFT 8
#define SENSOR_ENG_FSM_MASK (0xF << SENSOR_ENG_FSM_SHIFT)
#define SENSOR_ENG_FSM(n) BITFIELD_VAL(SENSOR_ENG_FSM, n)
#define SENSOR3_BUSY (1 << 7)
#define SENSOR2_BUSY (1 << 6)
#define SENSOR1_BUSY (1 << 5)
#define SENSOR0_BUSY (1 << 4)
#endif